search

RigsOfRods / rigs-of-rods

Main development repository for Rigs of Rods soft-body physics simulator
https://www.rigsofrods.org
GNU General Public License v3.0
1.03k stars 178 forks source link

Fixed #193 faulty/incomplete command keys on T-screen UI #3160

Closed ohlidalp closed 5 months ago

ohlidalp commented 5 months ago

Fixes #193

Test mod: Hughes 500D helicopter

The result - the controls are actually this weird by design, see my analysis below: obrazek

My analysis of the rig-def file:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
<---------------------- TRUCK DEF ----------------------------->  //// F keys (/84) --- Description, if any        <=== comparation with UI
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

commands
set_beam_defaults 12500000, 750, 18000000, 35000000
;fuel consumption engine kill
  54,  46, 5.00, 1.000, 1.400, 39, 29, i                           //// 39 = ALT+F3 | 29 = SHIFT+F5                 <=== not shown, the closest is nonexistent "Alt+F3/Alt+F4"
  56,  48, 5.00, 1.000, 1.400, 39, 29, i                           //// 39 = ALT+F3 | 29 = SHIFT+F5                 <=== ditto

set_beam_defaults 2500000, 250, 18000000, 35000000                 
;dashboard trim guages                                             
 145, 148, 0.009, 0.800, 1.200, 7, 8, i                            //// F7|F8                                       <=== OK
 145, 149, 0.009, 0.800, 1.200, 3, 4, i, TRIM_Cruise_Forth/Back    //// F3|F4 --- TRIM_Cruise_Forth/Back            <=== OK
 145, 150, 0.0035, 0.800, 1.200, 6, 5, i, TRIM_Strafe_Left/Right   //// F5|F6 --- !! conflict with 'TRIM_Pivot_Left/Right' *reversed* <=== OK

set_beam_defaults 17500000, 750, 18000000, 35000000                
;rotorhead trims                                                   
 164, 165, 0.0026, 0.952, 1.048, 3, 4, i                           //// F3|F4 --- TRIM_Cruise_Forth/Back            <=== OK
 164, 166, 0.0026, 0.952, 1.048, 4, 3, i                           //// F4|F3 --- TRIM_Cruise_Forth/Back *reversed* <=== OK, maps to the reversed
 164, 167, 0.0026, 0.952, 1.048, 8, 7, i                           //// F8|F7                                       <=== OK, maps to the reversed           
 164, 168, 0.0026, 0.952, 1.048, 7, 8, i                           //// F7|F8                                       <=== OK

;rotorblade animation                                              
set_beam_defaults 15000000, 250, 18000000, 35000000                
  60,  63, 0.003, 0.982,  1.011,  1,  2, i, TRIM_Lift_Up/Down      //// F1|F2 --- TRIM_Lift_Up/Down                 <=== OK              
  60,  64, 0.003, 0.982,  1.011,  1,  2, i                         //// F1|F2 --- TRIM_Lift_Up/Down                 <=== OK
  60,  65, 0.003, 0.982,  1.011,  1,  2, i                         //// F1|F2 --- TRIM_Lift_Up/Down                 <=== OK
  60,  66, 0.003, 0.982,  1.011,  1,  2, i                         //// F1|F2 --- TRIM_Lift_Up/Down                 <=== OK
;collective stick + gauge animation                                
set_beam_defaults 2000000, 250, 18000000, 35000000                 
  19, 159, 0.00370, 0.950,  1.075,  2,  1, i                       //// F2|F1 --- TRIM_Lift_Up/Down *reversed*      <=== OK, maps to the reversed  
 145, 160, 0.00296, 0.880,  1.200,  2,  1, i                       //// F2|F1 --- TRIM_Lift_Up/Down *reversed*      <=== OK, maps to the reversed  

set_beam_defaults 7500000, 250, 18000000, 35000000                 
  94,  93, 0.001, 0.900,  1.100,  5,  6, i, TRIM_Pivot_Left/Right  //// F6|F5 --- !! conflict with 'TRIM_Strafe_Left/Right' *reversed* <=== OK, shown as 'TRIM_Strafe_Left/Right'

set_inertia_defaults 0.55, 0.55, linear linear                     
  61, 128, 0.075, 1.000, 45.000,  9, 10, r, Hook_Up/Down           //// F9|F10 --- Hook_Up/Down                     <=== OK
 128, 129, 0.075, 1.000, 45.000,  9, 10, r                         //// F9|F10 --- Hook_Up/Down                     <=== OK
 129, 130, 0.075, 1.000, 45.000,  9, 10, r                         //// F9|F10 --- Hook_Up/Down                     <=== OK
 130, 131, 0.075, 1.000, 45.000,  9, 10, r                         //// F9|F10 --- Hook_Up/Down                     <=== OK
set_inertia_defaults -1                                            

set_beam_defaults 3000000, 250, 18000000, 35000000                 
commands2                                                          
set_inertia_defaults 1.0, 1.0, linear linear                       
;fast rotor texture swap                                           
  41, 110, 15.000, 15.000, 0.150, 1.000, 32, 33, ip                           //// SHIFT+F8|SHIFT+F9                      <=== not shown, instead there's 2 nonexistent entries, "Shift+F7/Shift+F8" and "Shift+F9/Shift+F10"
  42, 111, 15.000, 15.000, 0.150, 1.000, 32, 33, ip                           //// SHIFT+F8|SHIFT+F9                      <=== ditto
  43, 112, 15.000, 15.000, 0.150, 1.000, 32, 33, ip                           //// SHIFT+F8|SHIFT+F9                      <=== ditto
  44, 113, 15.000, 15.000, 0.150, 1.000, 32, 33, ip                           //// SHIFT+F8|SHIFT+F9                      <=== ditto
 114,  40, 15.000, 15.000, 0.025, 1.000, 32, 33, ip                           //// SHIFT+F8|SHIFT+F9                      <=== ditto
 115,  40, 15.000, 15.000, 0.025, 1.000, 32, 33, ip                           //// SHIFT+F8|SHIFT+F9                      <=== ditto
 116,  40, 15.000, 15.000, 0.025, 1.000, 32, 33, ip                           //// SHIFT+F8|SHIFT+F9                      <=== ditto
 117,  40, 15.000, 15.000, 0.025, 1.000, 32, 33, ip                           //// SHIFT+F8|SHIFT+F9                      <=== ditto
;hook fixation                                                                
 133,  40,  0.050,  0.050, 0.900, 1.000, 10,  9, ip                           //// F10|F9 --- Hook_Up/Down *reversed*     <=== OK, maps to the reversed

;fast tail rotor texture swap                                                 
 118,  78,  2.500,  2.500, 0.050, 1.000, 32, 33, ip                           //// SHIFT+F8|SHIFT+F9                      <=== ditto
 119,  78,  2.500,  2.500, 0.050, 1.000, 32, 33, ip                           //// SHIFT+F8|SHIFT+F9                      <=== ditto
 126,  78,  2.500,  2.500, 0.050, 1.000, 32, 33, ip                           //// SHIFT+F8|SHIFT+F9                      <=== ditto
 127,  78,  2.500,  2.500, 0.050, 1.000, 32, 33, ip                           //// SHIFT+F8|SHIFT+F9                      <=== ditto
 120, 122,  2.500,  2.500, 0.200, 1.000, 32, 33, ip                           //// SHIFT+F8|SHIFT+F9                      <=== ditto
 121, 123,  2.500,  2.500, 0.200, 1.000, 32, 33, ip                           //// SHIFT+F8|SHIFT+F9                      <=== ditto
  80, 124,  2.500,  2.500, 0.200, 1.000, 32, 33, ip                           //// SHIFT+F8|SHIFT+F9                      <=== ditto
  81, 125,  2.500,  2.500, 0.200, 1.000, 32, 33, ip                           //// SHIFT+F8|SHIFT+F9                      <=== ditto
set_inertia_defaults -1                                                       
set_beam_defaults 7500000, 250, 18000000, 35000000                            
;startup tail rotor trim                                                      
  94,  78,  0.100,  0.100, 0.989, 1.000, 30, 31, ci                           //// SHIFT+F6|SHIFT+F7                      <=== NOT SHOWN, instead there's nonexistent "Shift+F5/Shift+F6" and  "Shift+F7/Shift+F8"                     

set_beam_defaults 1500000, 250, 18000000, 35000000
set_inertia_defaults 0.01, 0.01, smooth smooth
;screen tilt + slide
 134, 138, 0.025, 0.025, 0.500,  1.000, 11, 12, ip, Camera-Screen_IN/OUT      //// F11|F12 --- Camera-Screen_IN/OUT       <=== OK
 135, 139, 0.025, 0.025, 0.500,  1.000, 11, 12, ip                            //// F11|F12 --- Camera-Screen_IN/OUT       <=== ditto
 136, 140, 0.025, 0.025, 0.500,  1.000, 11, 12, ip                            //// F11|F12 --- Camera-Screen_IN/OUT       <=== ditto
set_inertia_defaults 1.00, 1.00, smooth smooth                                                                            
 136, 137, 0.100, 0.200, 0.450,  1.000, 36, 37, i                             //// SHIFT+F12|ALT+F1                       <=== NOT SHOWN, the closest is nonexistent "Alt+F1/Alt+F2"
set_inertia_defaults -1

set_beam_defaults 1000000, 750, 18000000, 35000000
;fuel consumption
;speed2:  0.00025 = 40 mins burntime 
   2, 161, 0.050, 0.00025, 0.010, 400.0, 25, 26, i, Emergency_Refuel          //// SHIFT+F1|SHIFT+F2 --- Emergency_Refuel <=== OK
 161, 162, 0.050, 0.00025, 0.010, 400.0, 25, 27, i                            //// SHIFT+F1|SHIFT+F3                      <=== NOT shown, closest is nonexistent "Shift+F3/Shift+F4"
 162, 163, 0.050, 0.00025, 0.010, 400.0, 25, 28, i                            //// SHIFT+F1|SHIFT+F4                      <=== NOT shown, closest is nonexistent "Shift+F3/Shift+F4"

;fuel warn
 173,  16, 0.100, 0.100, 0.825, 1.00, 24, 25, i                               //// CTRL+F12|SHIFT+F1                      <=== Not shown, closest is nonexistent "Ctrl+F11/Ctrl+F12"
 174,  16, 0.100, 0.100, 0.825, 1.00, 23, 25, i                               //// CTRL+F11|SHIFT+F1

;overload warn
 175,  16, 0.500, 0.500, 0.700, 1.00, 22, 21, ip                              //// CTRL+F10|CTRL+F9                       <=== Shown reversed

;overspeed warn
 176,  16, 0.500, 0.500, 0.700, 1.00, 20, 19, ip                              //// CTRL+F8|CTRL+F7                        <=== Shown reversed