Open codehero opened 9 years ago
I think it is to do with http://comments.gmane.org/gmane.linux.usb.general/87138
Not sure if @RobertCNelson has put this patch into a bone version and if so what version
That link leads to: "http://comments.gmane.org/gmane.linux.usb.general/87138"
I am having issues with the communicating to an Arduino DUE unit. In particular, with bash scripts echoing characters to the /dev/ttyACM0 dev node. These scripts work fine on my x86_64 laptop, so the issue is definitely with the musb driver. The following is dmesg output.
Examples of errors:
[ 1650.157389] rtl_usb: reg 0x102, usbctrl_vendorreq TimeOut! status:0xffffffed value=0xd30000 [232335.298833] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [662816.943138] CAUTION: musb: Babble Interrupt Occurred [65798.825266] musb_ep_program 896: broken !rx_reinit, ep3 csr 0013 [65798.831640] musb_host_rx 1762: Rx interrupt with no errors or packet! [664136.643202] usb 1-1-port4: disabled by hub (EMI?), re-enabling...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.18.0-bone1 (root@a5-imx6q-wandboard-2gb) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 Mon Dec 8 06:20:25 UTC 2014 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: TI AM335x BeagleBone Black [ 0.000000] cma: Reserved 16 MiB at 0x9e800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 130816 [ 0.000000] free_area_init_node: node 0, pgdat c0a632b4, node_mem_map dfaf1000 [ 0.000000] Normal zone: 1024 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 130816 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1048574 pages exceeds freesize 0 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon ) [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792 [ 0.000000] Kernel command line: console=tty0 console=ttyO0,115200n8 capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait fixrtc quiet init=/lib/systemd/systemd [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] allocated 1046528 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 485896K/523264K available (6169K kernel code, 677K rwdata, 3396K rodata, 448K init, 861K bss, 37368K reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB) [ 0.000000] .text : 0xc0008000 - 0xc095f87c (9567 kB) [ 0.000000] .init : 0xc0960000 - 0xc09d0000 ( 448 kB) [ 0.000000] .data : 0xc09d0000 - 0xc0a79450 ( 678 kB) [ 0.000000] .bss : 0xc0a79450 - 0xc0b50b8c ( 862 kB) [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz [ 0.000017] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns [ 0.000046] OMAP clocksource: timer1 at 24000000 Hz [ 0.000428] Console: colour dummy device 80x30 [ 0.000640] console [tty0] enabled [ 0.000671] Calibrating delay loop... 548.86 BogoMIPS (lpj=2744320) [ 0.047900] pid_max: default: 32768 minimum: 301 [ 0.048075] Security Framework initialized [ 0.048155] AppArmor: AppArmor disabled by boot time parameter [ 0.048167] Yama: becoming mindful. [ 0.048447] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.048464] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.049393] Initializing cgroup subsys memory [ 0.049443] Initializing cgroup subsys devices [ 0.049465] Initializing cgroup subsys freezer [ 0.049488] Initializing cgroup subsys net_cls [ 0.049514] Initializing cgroup subsys blkio [ 0.049534] Initializing cgroup subsys perf_event [ 0.049553] Initializing cgroup subsys net_prio [ 0.049627] CPU: Testing write buffer coherency: ok [ 0.049690] ftrace: allocating 31267 entries in 62 pages [ 0.161920] Setting up static identity map for 0x805cb4c8 - 0x805cb514 [ 0.173021] devtmpfs: initialized [ 0.174470] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.188427] omap_hwmod: tptc0 using broken dt data from edma [ 0.188580] omap_hwmod: tptc1 using broken dt data from edma [ 0.188714] omap_hwmod: tptc2 using broken dt data from edma [ 0.193753] omap_hwmod: debugss: _wait_target_disable failed [ 0.262202] xor: measuring software checksum speed [ 0.357852] arm4regs : 684.800 MB/sec [ 0.457847] 8regs : 635.600 MB/sec [ 0.557848] 32regs : 611.600 MB/sec [ 0.657848] neon : 503.200 MB/sec [ 0.657859] xor: using function: arm4regs (684.800 MB/sec) [ 0.657947] pinctrl core: initialized pinctrl subsystem [ 0.658529] regulator-dummy: no parameters [ 0.687290] NET: Registered protocol family 16 [ 0.690483] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.692075] cpuidle: using governor ladder [ 0.692097] cpuidle: using governor menu [ 0.696823] OMAP GPIO hardware version 0.1 [ 0.718129] No ATAGs? [ 0.718167] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.898227] raid6: int32x1 111 MB/s [ 1.067949] raid6: int32x2 180 MB/s [ 1.237990] raid6: int32x4 148 MB/s [ 1.408341] raid6: int32x8 111 MB/s [ 1.577861] raid6: neonx1 792 MB/s [ 1.747867] raid6: neonx2 1010 MB/s [ 1.917860] raid6: neonx4 347 MB/s [ 2.087963] raid6: neonx8 158 MB/s [ 2.087973] raid6: using algorithm neonx2 (1010 MB/s) [ 2.087982] raid6: using intx1 recovery algorithm [ 2.101588] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver [ 2.102778] vbat: 5000 mV [ 2.103168] vmmcsd_fixed: 3300 mV [ 2.108069] SCSI subsystem initialized [ 2.108433] libata version 3.00 loaded. [ 2.108869] usbcore: registered new interface driver usbfs [ 2.108960] usbcore: registered new interface driver hub [ 2.109082] usbcore: registered new device driver usb [ 2.109865] omap_i2c 44e0b000.i2c: could not find pctldev for node /pinmux@44e10800/pinmux_i2c0_pins, deferring probe [ 2.109896] platform 44e0b000.i2c: Driver omap_i2c requests probe deferral [ 2.109933] omap_i2c 4819c000.i2c: could not find pctldev for node /pinmux@44e10800/pinmux_i2c2_pins, deferring probe [ 2.109953] platform 4819c000.i2c: Driver omap_i2c requests probe deferral [ 2.110194] media: Linux media interface: v0.10 [ 2.110277] Linux video capture interface: v2.00 [ 2.110409] pps_core: LinuxPPS API ver. 1 registered [ 2.110420] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 2.110458] PTP clock support registered [ 2.111463] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 [ 2.113497] NetLabel: Initializing [ 2.113513] NetLabel: domain hash size = 128 [ 2.113523] NetLabel: protocols = UNLABELED CIPSOv4 [ 2.113611] NetLabel: unlabeled traffic allowed by default [ 2.114377] Switched to clocksource timer1 [ 2.201676] NET: Registered protocol family 2 [ 2.202731] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 2.202804] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 2.202868] TCP: Hash tables configured (established 4096 bind 4096) [ 2.202952] TCP: reno registered [ 2.202967] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 2.202992] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 2.203241] NET: Registered protocol family 1 [ 2.203770] RPC: Registered named UNIX socket transport module. [ 2.203785] RPC: Registered udp transport module. [ 2.203794] RPC: Registered tcp transport module. [ 2.203803] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.204615] Unpacking initramfs... [ 2.611535] Freeing initrd memory: 3464K (c8080000 - c83e2000) [ 2.612302] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 2.616085] futex hash table entries: 256 (order: -1, 3072 bytes) [ 2.616225] audit: initializing netlink subsys (disabled) [ 2.616307] audit: type=2000 audit(2.540:1): initialized [ 2.618101] zpool: loaded [ 2.618123] zbud: loaded [ 2.618495] VFS: Disk quotas dquot_6.5.2 [ 2.618579] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.619406] NFS: Registering the id_resolver key type [ 2.619494] Key type id_resolver registered [ 2.619504] Key type id_legacy registered [ 2.619541] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.619959] fuse init (API version 7.23) [ 2.620295] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 2.621126] msgmni has been set to 987 [ 2.622696] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2.622913] io scheduler noop registered [ 2.622936] io scheduler deadline registered [ 2.623000] io scheduler cfq registered (default) [ 2.625209] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 2.630115] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.633382] omap_uart 44e09000.serial: no wakeirq for uart0 [ 2.633632] omap_uart 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 154, base_baud = 3000000) is a OMAP UART0 [ 2.634351] console [ttyO0] enabled [ 2.635130] omap_uart 48022000.serial: no wakeirq for uart0 [ 2.635322] omap_uart 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 155, base_baud = 3000000) is a OMAP UART1 [ 2.635898] omap_uart 48024000.serial: no wakeirq for uart0 [ 2.636077] omap_uart 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 156, base_baud = 3000000) is a OMAP UART2 [ 2.636644] omap_uart 481a8000.serial: no wakeirq for uart0 [ 2.636814] omap_uart 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 157, base_baud = 3000000) is a OMAP UART4 [ 2.637409] omap_uart 481aa000.serial: no wakeirq for uart0 [ 2.637582] omap_uart 481aa000.serial: ttyO5 at MMIO 0x481aa000 (irq = 158, base_baud = 3000000) is a OMAP UART5 [ 2.639752] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20 [ 2.640166] [drm] Initialized drm 1.1.0 20060810 [ 2.640311] usbcore: registered new interface driver udl [ 2.640341] Error: Driver 'tfp410' is already registered, aborting... [ 2.673867] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.673916] ehci-platform: EHCI generic platform driver [ 2.674231] ehci-omap: OMAP-EHCI Host Controller driver [ 2.674663] usbcore: registered new interface driver usb-storage [ 2.677247] 47401300.usb-phy supply vcc not found, using dummy regulator [ 2.680203] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 2.680225] musb-hdrc: MHDRC RTL version 2.0 [ 2.680237] musb-hdrc: setup fifo_mode 4 [ 2.680261] musb-hdrc: 28/31 max ep, 16384/16384 memory [ 2.681909] 47401b00.usb-phy supply vcc not found, using dummy regulator [ 2.684788] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 2.684809] musb-hdrc: MHDRC RTL version 2.0 [ 2.684820] musb-hdrc: setup fifo_mode 4 [ 2.684839] musb-hdrc: 28/31 max ep, 16384/16384 memory [ 2.684997] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver [ 2.685395] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1 [ 2.685655] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.685673] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.685688] usb usb1: Product: MUSB HDRC host driver [ 2.685702] usb usb1: Manufacturer: Linux 3.18.0-bone1 musb-hcd [ 2.685715] usb usb1: SerialNumber: musb-hdrc.1.auto [ 2.686771] hub 1-0:1.0: USB hub found [ 2.686834] hub 1-0:1.0: 1 port detected [ 2.700676] mousedev: PS/2 mouse device common for all mice [ 2.702453] omap_rtc 44e3e000.rtc: already running [ 2.703001] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 [ 2.703843] i2c /dev entries driver [ 2.704034] IR XMP protocol handler initialized [ 2.706201] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 2.706870] sdhci: Secure Digital Host Controller Interface driver [ 2.706881] sdhci: Copyright(c) Pierre Ossman [ 2.812240] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.814888] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.816953] ledtrig-cpu: registered to indicate activity on CPUs [ 2.817115] hidraw: raw HID events driver (C) Jiri Kosina [ 2.818461] usbcore: registered new interface driver usbhid [ 2.818474] usbhid: USB HID core driver [ 2.818813] mmc0: new high speed SDHC card at address 1234 [ 2.819681] mmcblk0: mmc0:1234 SA04G 3.69 GiB [ 2.821238] ashmem: initialized [ 2.823600] oprofile: using arm/armv7 [ 2.824005] TCP: cubic registered [ 2.824146] NET: Registered protocol family 10 [ 2.824601] mmcblk0: p1 p2 [ 2.830216] mip6: Mobile IPv6 [ 2.830250] NET: Registered protocol family 17 [ 2.830465] Key type dns_resolver registered [ 2.830499] mpls_gso: MPLS GSO support [ 2.830887] omap_voltage_late_init: Voltage driver support not added [ 2.837719] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.846317] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.855779] platform cpufreq-dt.0: Driver cpufreq-dt requests probe deferral [ 2.856137] ThumbEE CPU extension supported. [ 2.856191] Registering SWP/SWPB emulation handler [ 2.856212] SmartReflex Class3 initialized [ 2.857490] registered taskstats version 1 [ 2.862256] Btrfs loaded [ 2.875511] input: tps65217_pwr_but as /devices/ocp/44e0b000.i2c/i2c-0/0-0024/input/input0 [ 2.877371] vdds_dpr: at 1500 mV [ 2.878480] vdd_mpu: 925 <--> 1325 mV at 975 mV [ 2.879458] vdd_core: 925 <--> 1150 mV at 1100 mV [ 2.880391] vio,vrtc,vdds: at 1800 mV [ 2.881346] vdd_3v3aux: at 3300 mV [ 2.882286] vdd_1v8: 1800 mV [ 2.883235] vdd_3v3a: at 3300 mV [ 2.884281] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.890116] mmc1: BKOPS_EN bit is not set [ 2.894008] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.894072] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.896237] mmc1: new high speed MMC card at address 0001 [ 2.897146] mmcblk1: mmc1:0001 MMC02G 1.78 GiB [ 2.897419] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.904602] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.906866] mmcblk1: p1 p2 [ 2.910611] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.919452] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.928195] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.936829] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.936897] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.938242] cpufreq: cpufreq_add_dev: CPU0: Running at unlisted freq: 550000 KHz [ 2.940066] cpufreq: cpufreq_add_dev: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 3.004441] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 3.004460] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 3.011199] libphy: 4a101000.mdio: probed [ 3.011229] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 3.012167] cpsw 4a100000.ethernet: Detected MACID = 90:59:af:8f:df:6c [ 3.013294] omap_rtc 44e3e000.rtc: setting system clock to 2014-05-15 11:55:07 UTC (1400154907) [ 3.013315] sr_init: No PMIC hook to init smartreflex [ 3.013496] sr_init: platform driver register failed for SR [ 3.022542] PM: Hibernation image not present or could not be loaded. [ 3.022581] vbat: disabling [ 3.023434] Freeing unused kernel memory: 448K (c0960000 - c09d0000) [ 3.084542] usb 1-1: new full-speed USB device number 2 using musb-hdrc [ 3.105786] udevd[86]: starting version 175 [ 3.225588] usb 1-1: New USB device found, idVendor=0e8f, idProduct=0016 [ 3.225608] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.225617] usb 1-1: Product: USB HUB 2.0 [ 3.225625] usb 1-1: Manufacturer: GASIA Semi. [ 3.226556] hub 1-1:1.0: USB hub found [ 3.226720] hub 1-1:1.0: 4 ports detected [ 3.524568] usb 1-1.4: new full-speed USB device number 3 using musb-hdrc [ 3.645348] usb 1-1.4: New USB device found, idVendor=0e8f, idProduct=0016 [ 3.645367] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.645376] usb 1-1.4: Product: USB HUB 2.0 [ 3.645384] usb 1-1.4: Manufacturer: GASIA Semi. [ 3.646326] hub 1-1.4:1.0: USB hub found [ 3.646533] hub 1-1.4:1.0: 4 ports detected [ 3.944569] usb 1-1.4.3: new full-speed USB device number 4 using musb-hdrc [ 4.064752] usb 1-1.4.3: not running at top speed; connect to a high speed hub [ 4.065965] usb 1-1.4.3: New USB device found, idVendor=7392, idProduct=7811 [ 4.065976] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.065984] usb 1-1.4.3: Product: 802.11n WLAN Adapter [ 4.065992] usb 1-1.4.3: Manufacturer: Realtek [ 4.065999] usb 1-1.4.3: SerialNumber: 00e04c000001 [ 4.191710] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.672710] random: systemd urandom read with 58 bits of entropy available [ 5.446453] udevd[206]: starting version 175 [ 6.245421] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ 7.198693] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 [ 7.217698] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 [ 7.271179] random: nonblocking pool is initialized [ 7.295845] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 7.391487] cfg80211: Calling CRDA to update world regulatory domain [ 8.200228] rtl8192cu: Chip version 0x10 [ 8.534571] rtl8192cu: MAC address: 80:1f:02:aa:4f:9c [ 8.534612] rtl8192cu: Board Type 0 [ 8.534761] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [ 8.534858] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [ 8.596797] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 8.607726] usbcore: registered new interface driver rtl8192cu [ 8.616091] rtl8192cu: MAC auto ON okay! [ 8.652619] rtl8192cu: Tx queue select: 0x05 [ 9.589874] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 11.578075] wlan0: authenticate with 04:a1:51:bf:7c:b6 [ 11.578113] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded [ 11.604732] wlan0: send auth to 04:a1:51:bf:7c:b6 (try 1/3) [ 11.607814] wlan0: authenticated [ 11.614430] wlan0: associate with 04:a1:51:bf:7c:b6 (try 1/3) [ 11.697231] wlan0: RX AssocResp from 04:a1:51:bf:7c:b6 (capab=0x411 status=0 aid=3) [ 11.698886] wlan0: associated [ 11.699010] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 74.387824] using random self ethernet address [ 74.387849] using random host ethernet address [ 74.387893] using random self ethernet address [ 74.387902] using random host ethernet address [ 74.388700] usb0: HOST MAC b2:9e:ac:15:79:16 [ 74.391992] usb0: MAC 46:69:cc:cd:ae:cf [ 74.419774] Number of LUNs=8 [ 74.419802] Mass Storage Function, version: 2009/09/11 [ 74.419812] LUN: removable file: (no medium) [ 74.419828] Number of LUNs=1 [ 74.420004] LUN: removable file: /dev/mmcblk0p1 [ 74.420012] Number of LUNs=1 [ 74.429725] g_multi gadget: Multifunction Composite Gadget [ 74.429750] g_multi gadget: g_multi ready [ 76.642114] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 83.282756] net eth0: initializing cpsw version 1.12 (0) [ 83.286150] net eth0: phy found : id is : 0x7c0f1 [ 83.286277] libphy: PHY 4a101000.mdio:01 not found [ 83.291388] net eth0: phy 4a101000.mdio:01 not found on slave 1 [ 83.299587] net eth0: BQL enabled [ 83.304657] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 892.864600] usb 1-1.1: new full-speed USB device number 5 using musb-hdrc [ 892.984772] usb 1-1.1: not running at top speed; connect to a high speed hub [ 892.985621] usb 1-1.1: New USB device found, idVendor=2341, idProduct=003e [ 892.985655] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 892.985682] usb 1-1.1: Product: Arduino Due [ 892.985707] usb 1-1.1: Manufacturer: Arduino LLC [ 893.005028] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.1/1-1.1:1.2/0003:2341:003E.0001/input/input1 [ 893.008804] hid-generic 0003:2341:003E.0001: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.1/input2 [ 893.181638] cdc_acm 1-1.1:1.0: This device cannot do calls on its own. It is not a modem. [ 893.198061] cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device [ 893.209272] usbcore: registered new interface driver cdc_acm [ 893.209312] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1650.155831] usb 1-1.4.3: USB disconnect, device number 4 [ 1650.156794] wlan0: deauthenticating from 04:a1:51:bf:7c:b6 by local choice (Reason: 3=DEAUTH_LEAVING) [ 1650.157389] rtl_usb: reg 0x102, usbctrl_vendorreq TimeOut! status:0xffffffed value=0xd30000 [ 1650.174650] rtl_usb: reg 0x422, usbctrl_vendorreq TimeOut! status:0xffffffed value=0xf0002ace [ 1650.194231] rtl_usb: reg 0x542, usbctrl_vendorreq TimeOut! status:0xffffffed value=0x69543429 [ 1650.214014] rtl_usb: reg 0xe08, usbctrl_vendorreq TimeOut! status:0xffffffed value=0x69543429 [ 1650.246487] usb 1-1.1: USB disconnect, device number 5 [ 1650.255324] cfg80211: Calling CRDA to update world regulatory domain [ 1650.344621] usb 1-1.4: reset full-speed USB device number 3 using musb-hdrc [ 1650.784760] usb 1-1.4.3: new full-speed USB device number 6 using musb-hdrc [ 1650.904895] usb 1-1.4.3: not running at top speed; connect to a high speed hub [ 1650.906467] usb 1-1.4.3: New USB device found, idVendor=7392, idProduct=7811 [ 1650.906485] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1650.906494] usb 1-1.4.3: Product: 802.11n WLAN Adapter [ 1650.906502] usb 1-1.4.3: Manufacturer: Realtek [ 1650.906510] usb 1-1.4.3: SerialNumber: 00e04c000001 [ 1650.907728] rtl8192cu: Chip version 0x10 [ 1650.992000] rtl8192cu: MAC address: 80:1f:02:aa:4f:9c [ 1650.992039] rtl8192cu: Board Type 0 [ 1650.992180] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [ 1650.992268] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [ 1650.992850] ieee80211 phy1: Selected rate control algorithm 'rtl_rc' [ 1651.117678] net eth0: initializing cpsw version 1.12 (0) [ 1651.125802] net eth0: phy found : id is : 0x7c0f1 [ 1651.125915] libphy: PHY 4a101000.mdio:01 not found [ 1651.130994] net eth0: phy 4a101000.mdio:01 not found on slave 1 [ 1651.144754] net eth0: BQL enabled [ 1651.149861] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 1655.221409] rtl8192cu: MAC auto ON okay! [ 1655.257745] rtl8192cu: Tx queue select: 0x05 [ 1655.890432] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1897.112047] rtl8192cu: MAC auto ON okay! [ 1897.143744] rtl8192cu: Tx queue select: 0x05 [ 1897.759514] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1899.825150] wlan0: authenticate with 04:a1:51:bf:7c:b6 [ 1899.825230] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded [ 1899.843032] wlan0: send auth to 04:a1:51:bf:7c:b6 (try 1/3) [ 1899.870793] wlan0: authenticated [ 1899.874629] wlan0: associate with 04:a1:51:bf:7c:b6 (try 1/3) [ 1899.901120] wlan0: RX AssocResp from 04:a1:51:bf:7c:b6 (capab=0x411 status=0 aid=3) [ 1899.903461] wlan0: associated [ 1899.903930] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2019.011771] wlan0: deauthenticating from 04:a1:51:bf:7c:b6 by local choice (Reason: 3=DEAUTH_LEAVING) [ 2019.042097] cfg80211: Calling CRDA to update world regulatory domain [ 2019.411313] rtl8192cu: MAC auto ON okay! [ 2019.442844] rtl8192cu: Tx queue select: 0x05 [ 2020.055210] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2022.190106] wlan0: authenticate with 04:a1:51:bf:7c:b6 [ 2022.190182] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded [ 2022.210232] wlan0: send auth to 04:a1:51:bf:7c:b6 (try 1/3) [ 2022.233088] wlan0: authenticated [ 2022.244536] wlan0: associate with 04:a1:51:bf:7c:b6 (try 1/3) [ 2022.257322] wlan0: RX AssocResp from 04:a1:51:bf:7c:b6 (capab=0x411 status=0 aid=3) [ 2022.259764] wlan0: associated [ 2022.260236] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2286.128769] wlan0: deauthenticating from 04:a1:51:bf:7c:b6 by local choice (Reason: 3=DEAUTH_LEAVING) [ 2286.162741] cfg80211: Calling CRDA to update world regulatory domain [ 2286.449582] rtl8192cu: MAC auto ON okay! [ 2286.481060] rtl8192cu: Tx queue select: 0x05 [ 2287.301558] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2289.363247] wlan0: authenticate with 04:a1:51:bf:7c:b6 [ 2289.363296] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded [ 2289.379466] wlan0: send auth to 04:a1:51:bf:7c:b6 (try 1/3) [ 2289.384675] wlan0: authenticated [ 2289.394544] wlan0: associate with 04:a1:51:bf:7c:b6 (try 1/3) [ 2289.399227] wlan0: RX AssocResp from 04:a1:51:bf:7c:b6 (capab=0x411 status=0 aid=3) [ 2289.400999] wlan0: associated [ 2289.401235] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [33335.336220] wlan0: Connection to AP 04:a1:51:bf:7c:b6 lost [33335.356528] cfg80211: Calling CRDA to update world regulatory domain [33336.256599] wlan0: authenticate with 04:a1:51:bf:7c:b6 [33336.256675] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded [33336.277350] wlan0: send auth to 04:a1:51:bf:7c:b6 (try 1/3) [33336.288656] wlan0: authenticated [33336.294449] wlan0: associate with 04:a1:51:bf:7c:b6 (try 1/3) [33336.303090] wlan0: RX AssocResp from 04:a1:51:bf:7c:b6 (capab=0x411 status=0 aid=3) [33336.305727] wlan0: associated [33385.339911] wlan0: Connection to AP 04:a1:51:bf:7c:b6 lost [33385.365731] cfg80211: Calling CRDA to update world regulatory domain [33386.256960] wlan0: authenticate with 04:a1:51:bf:7c:b6 [33386.257039] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded [33386.274618] wlan0: send auth to 04:a1:51:bf:7c:b6 (try 1/3) [33386.277383] wlan0: authenticated [33386.284437] wlan0: associate with 04:a1:51:bf:7c:b6 (try 1/3) [33386.304442] wlan0: RX AssocResp from 04:a1:51:bf:7c:b6 (capab=0x411 status=0 aid=3) [33386.306806] wlan0: associated [33481.349878] wlan0: Connection to AP 04:a1:51:bf:7c:b6 lost [33481.367670] cfg80211: Calling CRDA to update world regulatory domain [33482.256634] wlan0: authenticate with 04:a1:51:bf:7c:b6 [33482.256711] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded [33482.274511] wlan0: send auth to 04:a1:51:bf:7c:b6 (try 1/3) [33482.295060] wlan0: authenticated [33482.304603] wlan0: associate with 04:a1:51:bf:7c:b6 (try 1/3) [33482.309685] wlan0: RX AssocResp from 04:a1:51:bf:7c:b6 (capab=0x411 status=0 aid=3) [33482.311359] wlan0: associated [33495.346254] wlan0: Connection to AP 04:a1:51:bf:7c:b6 lost [33495.371012] cfg80211: Calling CRDA to update world regulatory domain [33496.255986] wlan0: authenticate with 04:a1:51:bf:7c:b6 [33496.256061] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded [33496.276529] wlan0: send auth to 04:a1:51:bf:7c:b6 (try 1/3) [33496.279575] wlan0: authenticated [33496.284472] wlan0: associate with 04:a1:51:bf:7c:b6 (try 1/3) [33496.304616] wlan0: RX AssocResp from 04:a1:51:bf:7c:b6 (capab=0x411 status=0 aid=3) [33496.307157] wlan0: associated [33505.349953] wlan0: Connection to AP 04:a1:51:bf:7c:b6 lost [33505.367699] cfg80211: Calling CRDA to update world regulatory domain [33506.265565] wlan0: authenticate with 04:a1:51:bf:7c:b6 [33506.265640] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded [33506.285692] wlan0: send auth to 04:a1:51:bf:7c:b6 (try 1/3) [33506.295850] wlan0: authenticated [33506.304339] wlan0: associate with 04:a1:51:bf:7c:b6 (try 1/3) [33506.326117] wlan0: RX AssocResp from 04:a1:51:bf:7c:b6 (capab=0x411 status=0 aid=3) [33506.327974] wlan0: associated [33547.346129] wlan0: Connection to AP 04:a1:51:bf:7c:b6 lost [33547.375705] cfg80211: Calling CRDA to update world regulatory domain [33548.277077] wlan0: authenticate with 04:a1:51:bf:7c:b6 [33548.277153] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded [33548.295537] wlan0: send auth to 04:a1:51:bf:7c:b6 (try 1/3) [33548.297734] wlan0: authenticated [33548.314330] wlan0: associate with 04:a1:51:bf:7c:b6 (try 1/3) [33548.327733] wlan0: RX AssocResp from 04:a1:51:bf:7c:b6 (capab=0x411 status=0 aid=3) [33548.329560] wlan0: associated [33599.346113] wlan0: Connection to AP 04:a1:51:bf:7c:b6 lost [33599.371123] cfg80211: Calling CRDA to update world regulatory domain [33600.257265] wlan0: authenticate with 04:a1:51:bf:7c:b6 [33600.257345] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded [33600.275895] wlan0: send auth to 04:a1:51:bf:7c:b6 (try 1/3) [33600.300701] wlan0: authenticated [33600.314348] wlan0: associate with 04:a1:51:bf:7c:b6 (try 1/3) [33600.328041] wlan0: RX AssocResp from 04:a1:51:bf:7c:b6 (capab=0x411 status=0 aid=3) [33600.329798] wlan0: associated [33609.350200] wlan0: Connection to AP 04:a1:51:bf:7c:b6 lost [33609.367970] cfg80211: Calling CRDA to update world regulatory domain [33610.269462] wlan0: authenticate with 04:a1:51:bf:7c:b6 [33610.269540] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded [33610.285582] wlan0: send auth to 04:a1:51:bf:7c:b6 (try 1/3) [33610.304743] wlan0: authenticated [33610.314337] wlan0: associate with 04:a1:51:bf:7c:b6 (try 1/3) [33610.336763] wlan0: RX AssocResp from 04:a1:51:bf:7c:b6 (capab=0x411 status=0 aid=3) [33610.338535] wlan0: associated [33619.346051] wlan0: Connection to AP 04:a1:51:bf:7c:b6 lost [33619.371597] cfg80211: Calling CRDA to update world regulatory domain [33620.269608] wlan0: authenticate with 04:a1:51:bf:7c:b6 [33620.269686] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded [33620.285889] wlan0: send auth to 04:a1:51:bf:7c:b6 (try 1/3) [33620.289587] wlan0: authenticated [33620.294358] wlan0: associate with 04:a1:51:bf:7c:b6 (try 1/3) [33620.320194] wlan0: RX AssocResp from 04:a1:51:bf:7c:b6 (capab=0x411 status=0 aid=3) [33620.321956] wlan0: associated [61069.460301] wlan0: deauthenticated from 04:a1:51:bf:7c:b6 (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA) [61069.485794] cfg80211: Calling CRDA to update world regulatory domain [61070.378400] wlan0: authenticate with 04:a1:51:bf:7c:b6 [61070.378477] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded [61070.396282] wlan0: send auth to 04:a1:51:bf:7c:b6 (try 1/3) [61070.414308] wlan0: authenticated [61070.424325] wlan0: associate with 04:a1:51:bf:7c:b6 (try 1/3) [61070.428989] wlan0: RX AssocResp from 04:a1:51:bf:7c:b6 (capab=0x411 status=0 aid=3) [61070.431268] wlan0: associated [61440.024365] usb 1-1.4.4: new full-speed USB device number 7 using musb-hdrc [61440.144544] usb 1-1.4.4: not running at top speed; connect to a high speed hub [61440.145392] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [61440.145428] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [61440.145456] usb 1-1.4.4: Product: Arduino Due [61440.145482] usb 1-1.4.4: Manufacturer: Arduino LLC [61440.148044] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [61440.167963] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [61440.181894] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0002/input/input2 [61440.186973] hid-generic 0003:2341:003E.0002: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2
[62937.948704] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [62938.220361] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [62943.760577] usb 1-1.4-port3: disabled by hub (EMI?), re-enabling... [62943.767301] usb 1-1.4.3: USB disconnect, device number 6 [62943.767896] wlan0: deauthenticating from 04:a1:51:bf:7c:b6 by local choice (Reason: 3=DEAUTH_LEAVING) [62943.791891] cfg80211: Calling CRDA to update world regulatory domain [62943.799408] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [62944.044330] usb 1-1.4.3: new full-speed USB device number 8 using musb-hdrc [62944.115649] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [62944.164680] usb 1-1.4.3: not running at top speed; connect to a high speed hub [62944.166167] usb 1-1.4.3: New USB device found, idVendor=7392, idProduct=7811 [62944.166187] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [62944.166198] usb 1-1.4.3: Product: 802.11n WLAN Adapter [62944.166208] usb 1-1.4.3: Manufacturer: Realtek [62944.166217] usb 1-1.4.3: SerialNumber: 00e04c000001 [62944.167558] rtl8192cu: Chip version 0x10 [62944.252558] rtl8192cu: MAC address: 80:1f:02:aa:4f:9c [62944.252607] rtl8192cu: Board Type 0 [62944.252756] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [62944.252861] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [62944.253554] ieee80211 phy2: Selected rate control algorithm 'rtl_rc' [62944.256663] usb 1-1.4.4: USB disconnect, device number 7 [62944.261623] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [62944.270336] rtl8192cu: MAC auto ON okay! [62944.373547] rtl8192cu: Tx queue select: 0x05 [62945.017244] usb 1-1.4.4: new full-speed USB device number 9 using musb-hdrc [62945.035636] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [62945.134454] usb 1-1.4.4: not running at top speed; connect to a high speed hub [62945.135173] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [62945.135190] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [62945.135199] usb 1-1.4.4: Product: Arduino Due [62945.135207] usb 1-1.4.4: Manufacturer: Arduino LLC [62945.136301] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [62945.166598] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [62945.171975] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0003/input/input3 [62945.173433] hid-generic 0003:2341:003E.0003: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [62945.953512] wlan0: authenticate with 04:a1:51:bf:7c:b6 [62945.953562] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded [62945.977485] wlan0: send auth to 04:a1:51:bf:7c:b6 (try 1/3) [62945.989662] wlan0: authenticated [62945.994248] wlan0: associate with 04:a1:51:bf:7c:b6 (try 1/3) [62946.004070] wlan0: RX AssocResp from 04:a1:51:bf:7c:b6 (capab=0x411 status=0 aid=3) [62946.005956] wlan0: associated [62946.006205] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [62957.159280] musb_ep_program 896: broken !rx_reinit, ep4 csr 0013 [62957.165660] musb_host_rx 1762: Rx interrupt with no errors or packet! [64553.565445] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [64553.850706] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [64558.117539] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [64558.390092] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [64558.662214] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [64558.936426] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [64559.208456] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [64559.440668] usb 1-1.4-port3: disabled by hub (EMI?), re-enabling... [64559.447553] usb 1-1.4.3: USB disconnect, device number 8 [64559.448521] wlan0: deauthenticating from 04:a1:51:bf:7c:b6 by local choice (Reason: 3=DEAUTH_LEAVING) [64559.476395] cfg80211: Calling CRDA to update world regulatory domain [64559.481782] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [64559.734336] usb 1-1.4.3: new full-speed USB device number 10 using musb-hdrc [64559.767189] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [64559.854743] usb 1-1.4.3: not running at top speed; connect to a high speed hub [64559.856214] usb 1-1.4.3: New USB device found, idVendor=7392, idProduct=7811 [64559.856231] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [64559.856260] usb 1-1.4.3: Product: 802.11n WLAN Adapter [64559.856269] usb 1-1.4.3: Manufacturer: Realtek [64559.856276] usb 1-1.4.3: SerialNumber: 00e04c000001 [64559.859671] rtl8192cu: Chip version 0x10 [64559.944700] rtl8192cu: MAC address: 80:1f:02:aa:4f:9c [64559.944742] rtl8192cu: Board Type 0 [64559.944943] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [64559.945034] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [64559.945635] ieee80211 phy3: Selected rate control algorithm 'rtl_rc' [64559.954813] usb 1-1.4.4: USB disconnect, device number 9 [64559.962254] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [64560.234323] usb 1-1.4.4: new full-speed USB device number 11 using musb-hdrc [64560.354366] usb 1-1.4.4: not running at top speed; connect to a high speed hub [64560.354885] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [64560.354897] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [64560.354906] usb 1-1.4.4: Product: Arduino Due [64560.354914] usb 1-1.4.4: Manufacturer: Arduino LLC [64560.355993] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [64560.369612] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [64560.376766] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0004/input/input4 [64560.379121] hid-generic 0003:2341:003E.0004: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [64586.215697] usb 1-1.4.3: USB disconnect, device number 10 [64586.261553] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [64586.275124] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [64586.374766] usb 1-1.4-port4: disabled by hub (EMI?), re-enabling... [64586.381501] usb 1-1.4.4: USB disconnect, device number 11 [64586.574329] hub 1-1.4:1.0: hub_port_status failed (err = -71) [64587.054366] usb 1-1.4.4: new full-speed USB device number 12 using musb-hdrc [64587.174518] usb 1-1.4.4: not running at top speed; connect to a high speed hub [64587.175347] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [64587.175383] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [64587.175410] usb 1-1.4.4: Product: Arduino Due [64587.175436] usb 1-1.4.4: Manufacturer: Arduino LLC [64587.177864] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [64587.197207] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [64587.210935] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0005/input/input5 [64587.216284] hid-generic 0003:2341:003E.0005: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [65686.532578] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [65686.799367] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [65692.400423] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [65692.406483] usb 1-1.4.4: USB disconnect, device number 12 [65692.414532] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [65692.694298] usb 1-1.4.4: new full-speed USB device number 13 using musb-hdrc [65692.814423] usb 1-1.4.4: not running at top speed; connect to a high speed hub [65692.815016] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [65692.815034] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [65692.815049] usb 1-1.4.4: Product: Arduino Due [65692.815062] usb 1-1.4.4: Manufacturer: Arduino LLC [65692.819231] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [65692.831634] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [65692.839284] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0006/input/input6 [65692.841459] hid-generic 0003:2341:003E.0006: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [65798.825266] musb_ep_program 896: broken !rx_reinit, ep3 csr 0013 [65798.831640] musb_host_rx 1762: Rx interrupt with no errors or packet! [65959.243261] musb_ep_program 896: broken !rx_reinit, ep3 csr 0013 [65959.249614] musb_host_rx 1762: Rx interrupt with no errors or packet! [66243.641307] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66243.647704] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66244.182436] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66244.188973] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66244.462732] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66244.469008] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66244.741471] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66244.747776] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66245.020234] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66245.026561] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66245.299147] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66245.305398] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66245.577051] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66245.583080] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66245.850468] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66245.856751] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66246.129529] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66246.135826] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66246.420843] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66246.427110] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66246.699768] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66246.714953] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66246.992697] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66246.998963] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66247.271391] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66247.280354] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66247.547595] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66247.553873] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66247.826184] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66247.836581] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66248.111256] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66248.117558] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66248.390525] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66248.397725] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66248.677942] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66248.685904] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66248.815474] usb 1-1.4.4: USB disconnect, device number 13 [66249.114290] usb 1-1.4.4: new full-speed USB device number 14 using musb-hdrc [66249.234458] usb 1-1.4.4: not running at top speed; connect to a high speed hub [66249.235059] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [66249.235078] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [66249.235093] usb 1-1.4.4: Product: Arduino Due [66249.235106] usb 1-1.4.4: Manufacturer: Arduino LLC [66249.239307] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [66249.251670] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [66249.259428] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0007/input/input7 [66249.261646] hid-generic 0003:2341:003E.0007: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [66799.683334] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66799.689669] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66805.588101] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66805.595568] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66805.867275] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66805.873289] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66806.139059] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66806.146400] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66806.419497] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66806.425803] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66806.699184] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66806.705306] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66806.972608] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66806.978905] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66807.251311] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66807.257625] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66807.535327] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66807.541601] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66807.814391] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66807.820587] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66808.103361] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66808.109656] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66808.377814] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66808.383787] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66808.654434] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66808.660648] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66808.935218] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66808.946571] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66809.229229] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66809.235518] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66809.508084] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66809.518971] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66809.801665] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66809.809352] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66810.075779] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66810.089744] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [66810.325610] usb 1-1.4.4: USB disconnect, device number 14 [66810.594339] usb 1-1.4.4: new full-speed USB device number 15 using musb-hdrc [66810.714635] usb 1-1.4.4: not running at top speed; connect to a high speed hub [66810.715601] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [66810.715651] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [66810.715679] usb 1-1.4.4: Product: Arduino Due [66810.715705] usb 1-1.4.4: Manufacturer: Arduino LLC [66810.718977] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [66810.740389] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [66810.754525] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0008/input/input8 [66810.758500] hid-generic 0003:2341:003E.0008: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [67361.289802] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67361.305109] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67368.287549] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67368.293855] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67368.567632] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67368.573693] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67368.846510] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67368.852728] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67369.125254] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67369.131535] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67369.406419] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67369.412531] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67369.685375] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67369.691675] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67369.964485] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67369.970660] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67370.243223] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67370.249523] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67370.521178] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67370.527271] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67370.794896] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67370.801138] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67371.072418] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67371.078614] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67371.345505] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67371.351773] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67371.624312] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67371.630538] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67371.903286] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67371.909731] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67372.183633] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67372.189938] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67372.462749] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67372.468963] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67372.741667] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67372.747800] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67373.028287] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67373.036442] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [67373.110478] usb 1-1.4.4: USB disconnect, device number 15 [67373.374337] usb 1-1.4.4: new full-speed USB device number 16 using musb-hdrc [67373.494516] usb 1-1.4.4: not running at top speed; connect to a high speed hub [67373.495335] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [67373.495370] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [67373.495398] usb 1-1.4.4: Product: Arduino Due [67373.495424] usb 1-1.4.4: Manufacturer: Arduino LLC [67373.497823] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [67373.517554] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [67373.531183] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0009/input/input9 [67373.536194] hid-generic 0003:2341:003E.0009: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [67415.453258] musb_ep_program 896: broken !rx_reinit, ep3 csr 0013 [67415.459612] musb_host_rx 1762: Rx interrupt with no errors or packet! [67415.466483] musb_host_rx 1762: Rx interrupt with no errors or packet! [69483.490612] usb 1-1.4.4: USB disconnect, device number 16 [69483.834336] usb 1-1.4.4: new full-speed USB device number 17 using musb-hdrc [69483.954504] usb 1-1.4.4: device descriptor read/all, error -71 [69484.054321] usb 1-1.4.4: new full-speed USB device number 18 using musb-hdrc [69484.174480] usb 1-1.4.4: not running at top speed; connect to a high speed hub [69484.175362] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [69484.175397] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [69484.175425] usb 1-1.4.4: Product: Arduino Due [69484.175451] usb 1-1.4.4: Manufacturer: Arduino LLC [69484.185731] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [69484.214856] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [69484.235264] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.000A/input/input10 [69484.236895] hid-generic 0003:2341:003E.000A: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [69484.494213] usb 1-1.4.2: new full-speed USB device number 19 using musb-hdrc [69484.614929] usb 1-1.4.2: not running at top speed; connect to a high speed hub [69484.617342] usb 1-1.4.2: New USB device found, idVendor=05dc, idProduct=a400 [69484.617360] usb 1-1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [69484.617375] usb 1-1.4.2: Product: JUMPDRIVE SECURE [69484.617388] usb 1-1.4.2: Manufacturer: LEXAR MEDIA [69484.617401] usb 1-1.4.2: SerialNumber: 106A6604221918121104 [69484.621544] usb-storage 1-1.4.2:1.0: USB Mass Storage device detected [69484.622336] scsi host0: usb-storage 1-1.4.2:1.0 [69485.615951] scsi 0:0:0:0: Direct-Access LEXAR JUMPDRIVE SECURE 1000 PQ: 0 ANSI: 0 CCS [69485.622925] sd 0:0:0:0: [sda] 2030592 512-byte logical blocks: (1.03 GB/991 MiB) [69485.624527] sd 0:0:0:0: [sda] Write Protect is off [69485.624571] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [69485.625829] sd 0:0:0:0: [sda] No Caching mode page found [69485.631526] sd 0:0:0:0: [sda] Assuming drive cache: write through [69485.713590] sda: sda1 [69485.719345] sd 0:0:0:0: [sda] Attached SCSI disk [69485.721416] sd 0:0:0:0: Attached scsi generic sg0 type 0 [69508.366405] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [69508.389005] EXT4-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended [69508.514050] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [69676.015606] usb 1-1.4.2: USB disconnect, device number 19 [69676.184556] usb 1-1.4-port4: disabled by hub (EMI?), re-enabling... [69676.191326] usb 1-1.4.4: USB disconnect, device number 18 [69676.464196] usb 1-1.4.4: new full-speed USB device number 20 using musb-hdrc [69676.584389] usb 1-1.4.4: not running at top speed; connect to a high speed hub [69676.584973] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [69676.584991] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [69676.585006] usb 1-1.4.4: Product: Arduino Due [69676.585019] usb 1-1.4.4: Manufacturer: Arduino LLC [69676.586429] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [69676.601091] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [69676.609140] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.000B/input/input11 [69676.611260] hid-generic 0003:2341:003E.000B: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [69684.430603] usb 1-1.4.4: USB disconnect, device number 20 [69684.432617] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [69685.804229] CAUTION: musb: Babble Interrupt Occurred [69685.894394] usb 1-1: USB disconnect, device number 2 [69685.894415] usb 1-1.4: USB disconnect, device number 3 [69685.904204] musb-hdrc musb-hdrc.1.auto: Restarting MUSB to recover from Babble [69685.906140] musb-hdrc: setup fifo_mode 4 [69685.906164] musb-hdrc: 28/31 max ep, 16384/16384 memory [69686.304240] usb 1-1: new full-speed USB device number 21 using musb-hdrc [69686.445182] usb 1-1: New USB device found, idVendor=0e8f, idProduct=0016 [69686.445204] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [69686.445213] usb 1-1: Product: USB HUB 2.0 [69686.445222] usb 1-1: Manufacturer: GASIA Semi. [69686.447986] hub 1-1:1.0: USB hub found [69686.448325] hub 1-1:1.0: 4 ports detected [69686.744341] usb 1-1.4: new full-speed USB device number 22 using musb-hdrc [69686.865199] usb 1-1.4: New USB device found, idVendor=0e8f, idProduct=0016 [69686.865221] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [69686.865231] usb 1-1.4: Product: USB HUB 2.0 [69686.865239] usb 1-1.4: Manufacturer: GASIA Semi. [69686.868085] hub 1-1.4:1.0: USB hub found [69686.868428] hub 1-1.4:1.0: 4 ports detected [69687.164328] usb 1-1.4.4: new full-speed USB device number 23 using musb-hdrc [69687.284528] usb 1-1.4.4: not running at top speed; connect to a high speed hub [69687.285202] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [69687.285216] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [69687.285225] usb 1-1.4.4: Product: Arduino Due [69687.285233] usb 1-1.4.4: Manufacturer: Arduino LLC [69687.288280] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [69687.310034] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [69687.318895] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.000C/input/input12 [69687.321113] hid-generic 0003:2341:003E.000C: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [76638.930260] usb 1-1: USB disconnect, device number 21 [76638.930310] usb 1-1.4: USB disconnect, device number 22 [76638.930341] usb 1-1.4.4: USB disconnect, device number 23 [76638.932166] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [76645.194223] usb 1-1: new full-speed USB device number 24 using musb-hdrc [76645.335146] usb 1-1: New USB device found, idVendor=0e8f, idProduct=0016 [76645.335167] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [76645.335176] usb 1-1: Product: USB HUB 2.0 [76645.335184] usb 1-1: Manufacturer: GASIA Semi. [76645.337945] hub 1-1:1.0: USB hub found [76645.338288] hub 1-1:1.0: 4 ports detected [76645.634288] usb 1-1.4: new full-speed USB device number 25 using musb-hdrc [76645.755040] usb 1-1.4: New USB device found, idVendor=0e8f, idProduct=0016 [76645.755062] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [76645.755071] usb 1-1.4: Product: USB HUB 2.0 [76645.755080] usb 1-1.4: Manufacturer: GASIA Semi. [76645.757861] hub 1-1.4:1.0: USB hub found [76645.758450] hub 1-1.4:1.0: 4 ports detected [76646.054293] usb 1-1.4.4: new full-speed USB device number 26 using musb-hdrc [76646.174472] usb 1-1.4.4: not running at top speed; connect to a high speed hub [76646.175031] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [76646.175045] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [76646.175054] usb 1-1.4.4: Product: Arduino Due [76646.175062] usb 1-1.4.4: Manufacturer: Arduino LLC [76646.178142] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [76646.199898] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [76646.208810] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.000D/input/input13 [76646.215712] hid-generic 0003:2341:003E.000D: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [76679.276345] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [76679.360586] usb 1-1.4.4: USB disconnect, device number 26 [76679.361287] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [76684.824313] usb 1-1.4.4: new full-speed USB device number 27 using musb-hdrc [76684.944472] usb 1-1.4.4: not running at top speed; connect to a high speed hub [76684.945055] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [76684.945071] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [76684.945080] usb 1-1.4.4: Product: Arduino Due [76684.945088] usb 1-1.4.4: Manufacturer: Arduino LLC [76684.948120] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [76684.975058] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [76684.981523] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.000E/input/input14 [76684.983019] hid-generic 0003:2341:003E.000E: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [77957.352465] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [77957.430641] usb 1-1.4.4: USB disconnect, device number 27 [77957.431344] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [77957.724320] usb 1-1.4.4: new full-speed USB device number 28 using musb-hdrc [77957.844456] usb 1-1.4.4: not running at top speed; connect to a high speed hub [77957.845156] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [77957.845172] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [77957.845183] usb 1-1.4.4: Product: Arduino Due [77957.845193] usb 1-1.4.4: Manufacturer: Arduino LLC [77957.848641] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [77957.876388] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [77957.886710] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.000F/input/input15 [77957.888523] hid-generic 0003:2341:003E.000F: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [79083.231260] CAUTION: musb: Babble Interrupt Occurred [79083.231774] usb 1-1: USB disconnect, device number 24 [79083.231811] usb 1-1.4: USB disconnect, device number 25 [79083.231841] usb 1-1.4.4: USB disconnect, device number 28 [79083.232532] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [79083.324305] musb-hdrc musb-hdrc.1.auto: Restarting MUSB to recover from Babble [79083.326404] musb-hdrc: setup fifo_mode 4 [79083.326456] musb-hdrc: 28/31 max ep, 16384/16384 memory [79083.724266] usb 1-1: new full-speed USB device number 29 using musb-hdrc [79083.865002] usb 1-1: New USB device found, idVendor=0e8f, idProduct=0016 [79083.865023] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [79083.865033] usb 1-1: Product: USB HUB 2.0 [79083.865041] usb 1-1: Manufacturer: GASIA Semi. [79083.867701] hub 1-1:1.0: USB hub found [79083.868038] hub 1-1:1.0: 4 ports detected [79084.164244] usb 1-1.4: new full-speed USB device number 30 using musb-hdrc [79084.285288] usb 1-1.4: New USB device found, idVendor=0e8f, idProduct=0016 [79084.285309] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [79084.285319] usb 1-1.4: Product: USB HUB 2.0 [79084.285327] usb 1-1.4: Manufacturer: GASIA Semi. [79084.288124] hub 1-1.4:1.0: USB hub found [79084.288703] hub 1-1.4:1.0: 4 ports detected [79084.584321] usb 1-1.4.4: new full-speed USB device number 31 using musb-hdrc [79084.704402] usb 1-1.4.4: not running at top speed; connect to a high speed hub [79084.704976] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [79084.704990] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [79084.704999] usb 1-1.4.4: Product: Arduino Due [79084.705008] usb 1-1.4.4: Manufacturer: Arduino LLC [79084.708192] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [79084.732438] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [79084.746003] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0010/input/input16 [79084.747533] hid-generic 0003:2341:003E.0010: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [80207.468329] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [80207.743067] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [80208.015719] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [80208.288894] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [80208.555071] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [80208.828037] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [80209.100878] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [80209.373175] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [80209.646125] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [80209.920857] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [80210.194780] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [80210.474320] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [80210.565567] usb 1-1.4.4: USB disconnect, device number 31 [80210.566274] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [80210.854253] usb 1-1.4.4: new full-speed USB device number 32 using musb-hdrc [80210.974351] usb 1-1.4.4: not running at top speed; connect to a high speed hub [80210.974932] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [80210.974950] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [80210.974964] usb 1-1.4.4: Product: Arduino Due [80210.974993] usb 1-1.4.4: Manufacturer: Arduino LLC [80210.979210] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [80210.990904] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [80210.998046] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0011/input/input17 [80211.000374] hid-generic 0003:2341:003E.0011: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [81288.030499] usb 1-1-port4: disabled by hub (EMI?), re-enabling... [81288.037139] usb 1-1.4: USB disconnect, device number 30 [81288.037241] usb 1-1.4.4: USB disconnect, device number 32 [81288.524274] usb 1-1.4: new full-speed USB device number 33 using musb-hdrc [81288.645348] usb 1-1.4: New USB device found, idVendor=0e8f, idProduct=0016 [81288.645398] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [81288.645427] usb 1-1.4: Product: USB HUB 2.0 [81288.645453] usb 1-1.4: Manufacturer: GASIA Semi. [81288.647670] hub 1-1.4:1.0: USB hub found [81288.648806] hub 1-1.4:1.0: 4 ports detected [81288.944211] usb 1-1.4.4: new full-speed USB device number 34 using musb-hdrc [81289.064332] usb 1-1.4.4: not running at top speed; connect to a high speed hub [81289.064919] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [81289.064937] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [81289.064951] usb 1-1.4.4: Product: Arduino Due [81289.064964] usb 1-1.4.4: Manufacturer: Arduino LLC [81289.066382] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [81289.081103] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [81289.088997] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0012/input/input18 [81289.091152] hid-generic 0003:2341:003E.0012: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [81289.560394] usb 1-1-port4: disabled by hub (EMI?), re-enabling... [81289.566884] usb 1-1.4: USB disconnect, device number 33 [81289.566923] usb 1-1.4.4: USB disconnect, device number 34 [81289.834277] usb 1-1.4: new full-speed USB device number 35 using musb-hdrc [81289.955344] usb 1-1.4: New USB device found, idVendor=0e8f, idProduct=0016 [81289.955388] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [81289.955416] usb 1-1.4: Product: USB HUB 2.0 [81289.955442] usb 1-1.4: Manufacturer: GASIA Semi. [81289.957653] hub 1-1.4:1.0: USB hub found [81289.958804] hub 1-1.4:1.0: 4 ports detected [81290.254213] usb 1-1.4.4: new full-speed USB device number 36 using musb-hdrc [81290.374436] usb 1-1.4.4: not running at top speed; connect to a high speed hub [81290.375235] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [81290.375270] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [81290.375297] usb 1-1.4.4: Product: Arduino Due [81290.375323] usb 1-1.4.4: Manufacturer: Arduino LLC [81290.377761] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [81290.397440] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [81290.411349] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0013/input/input19 [81290.416331] hid-generic 0003:2341:003E.0013: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [81291.090539] usb 1-1-port4: disabled by hub (EMI?), re-enabling... [81291.097162] usb 1-1.4: USB disconnect, device number 35 [81291.097255] usb 1-1.4.4: USB disconnect, device number 36 [81291.374285] usb 1-1.4: new full-speed USB device number 37 using musb-hdrc [81291.495341] usb 1-1.4: New USB device found, idVendor=0e8f, idProduct=0016 [81291.495384] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [81291.495412] usb 1-1.4: Product: USB HUB 2.0 [81291.495438] usb 1-1.4: Manufacturer: GASIA Semi. [81291.497615] hub 1-1.4:1.0: USB hub found [81291.498862] hub 1-1.4:1.0: 4 ports detected [81291.794214] usb 1-1.4.2: new full-speed USB device number 38 using musb-hdrc [81291.914891] usb 1-1.4.2: not running at top speed; connect to a high speed hub [81291.917277] usb 1-1.4.2: New USB device found, idVendor=05dc, idProduct=a400 [81291.917296] usb 1-1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [81291.917310] usb 1-1.4.2: Product: JUMPDRIVE SECURE [81291.917323] usb 1-1.4.2: Manufacturer: LEXAR MEDIA [81291.917336] usb 1-1.4.2: SerialNumber: 106A6604221918121104 [81291.918780] usb-storage 1-1.4.2:1.0: USB Mass Storage device detected [81291.922103] scsi host1: usb-storage 1-1.4.2:1.0 [81292.024289] usb 1-1.4.4: new full-speed USB device number 39 using musb-hdrc [81292.144432] usb 1-1.4.4: not running at top speed; connect to a high speed hub [81292.145234] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [81292.145268] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [81292.145296] usb 1-1.4.4: Product: Arduino Due [81292.145322] usb 1-1.4.4: Manufacturer: Arduino LLC [81292.147655] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [81292.166013] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [81292.179936] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0014/input/input20 [81292.183604] hid-generic 0003:2341:003E.0014: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [81292.916544] scsi 1:0:0:0: Direct-Access LEXAR JUMPDRIVE SECURE 1000 PQ: 0 ANSI: 0 CCS [81292.922255] sd 1:0:0:0: Attached scsi generic sg0 type 0 [81292.924884] sd 1:0:0:0: [sda] 2030592 512-byte logical blocks: (1.03 GB/991 MiB) [81292.926097] sd 1:0:0:0: [sda] Write Protect is off [81292.926142] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00 [81292.927467] sd 1:0:0:0: [sda] No Caching mode page found [81292.933211] sd 1:0:0:0: [sda] Assuming drive cache: write through [81293.003219] sda: sda1 [81293.008988] sd 1:0:0:0: [sda] Attached SCSI disk [81303.167588] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [81303.190150] EXT4-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended [81303.315166] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [81338.105534] usb 1-1.4.2: USB disconnect, device number 38 [81338.274499] usb 1-1.4-port4: disabled by hub (EMI?), re-enabling... [81338.281273] usb 1-1.4.4: USB disconnect, device number 39 [81338.554312] usb 1-1.4.4: new full-speed USB device number 40 using musb-hdrc [81338.674444] usb 1-1.4.4: not running at top speed; connect to a high speed hub [81338.675266] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [81338.675302] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [81338.675330] usb 1-1.4.4: Product: Arduino Due [81338.675356] usb 1-1.4.4: Manufacturer: Arduino LLC [81338.677761] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [81338.696271] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [81338.710028] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0015/input/input21 [81338.713806] hid-generic 0003:2341:003E.0015: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [82369.995580] usb 1-1-port4: disabled by hub (EMI?), re-enabling... [82370.002205] usb 1-1.4: USB disconnect, device number 37 [82370.002306] usb 1-1.4.4: USB disconnect, device number 40 [82370.274264] usb 1-1.4: new full-speed USB device number 41 using musb-hdrc [82370.395338] usb 1-1.4: New USB device found, idVendor=0e8f, idProduct=0016 [82370.395382] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [82370.395410] usb 1-1.4: Product: USB HUB 2.0 [82370.395436] usb 1-1.4: Manufacturer: GASIA Semi. [82370.397638] hub 1-1.4:1.0: USB hub found [82370.398764] hub 1-1.4:1.0: 4 ports detected [82370.694245] usb 1-1.4.2: new full-speed USB device number 42 using musb-hdrc [82370.814862] usb 1-1.4.2: not running at top speed; connect to a high speed hub [82370.817245] usb 1-1.4.2: New USB device found, idVendor=05dc, idProduct=a400 [82370.817264] usb 1-1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [82370.817279] usb 1-1.4.2: Product: JUMPDRIVE SECURE [82370.817292] usb 1-1.4.2: Manufacturer: LEXAR MEDIA [82370.817304] usb 1-1.4.2: SerialNumber: 106A6604221918121104 [82370.818761] usb-storage 1-1.4.2:1.0: USB Mass Storage device detected [82370.822279] scsi host2: usb-storage 1-1.4.2:1.0 [82370.924279] usb 1-1.4.4: new full-speed USB device number 43 using musb-hdrc [82371.044422] usb 1-1.4.4: not running at top speed; connect to a high speed hub [82371.045232] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [82371.045268] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [82371.045295] usb 1-1.4.4: Product: Arduino Due [82371.045320] usb 1-1.4.4: Manufacturer: Arduino LLC [82371.047666] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [82371.067926] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [82371.082051] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0016/input/input22 [82371.087029] hid-generic 0003:2341:003E.0016: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [82371.815570] scsi 2:0:0:0: Direct-Access LEXAR JUMPDRIVE SECURE 1000 PQ: 0 ANSI: 0 CCS [82371.817607] sd 2:0:0:0: Attached scsi generic sg0 type 0 [82371.819549] sd 2:0:0:0: [sda] 2030592 512-byte logical blocks: (1.03 GB/991 MiB) [82371.820659] sd 2:0:0:0: [sda] Write Protect is off [82371.820684] sd 2:0:0:0: [sda] Mode Sense: 43 00 00 00 [82371.821780] sd 2:0:0:0: [sda] No Caching mode page found [82371.827512] sd 2:0:0:0: [sda] Assuming drive cache: write through [82371.909173] sda: sda1 [82371.914821] sd 2:0:0:0: [sda] Attached SCSI disk [82379.586188] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [82379.609223] EXT4-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended [82379.734301] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [82415.100184] CAUTION: musb: Babble Interrupt Occurred [82415.100606] usb 1-1: USB disconnect, device number 29 [82415.100643] usb 1-1.4: USB disconnect, device number 41 [82415.100672] usb 1-1.4.2: USB disconnect, device number 42 [82415.109844] usb 1-1.4.4: USB disconnect, device number 43 [82415.194253] musb-hdrc musb-hdrc.1.auto: Restarting MUSB to recover from Babble [82415.196355] musb-hdrc: setup fifo_mode 4 [82415.196405] musb-hdrc: 28/31 max ep, 16384/16384 memory [82415.594123] usb 1-1: new full-speed USB device number 44 using musb-hdrc [82415.734930] usb 1-1: New USB device found, idVendor=0e8f, idProduct=0016 [82415.734959] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [82415.734974] usb 1-1: Product: USB HUB 2.0 [82415.734987] usb 1-1: Manufacturer: GASIA Semi. [82415.736288] hub 1-1:1.0: USB hub found [82415.736439] hub 1-1:1.0: 4 ports detected [82416.034217] usb 1-1.4: new full-speed USB device number 45 using musb-hdrc [82416.155336] usb 1-1.4: New USB device found, idVendor=0e8f, idProduct=0016 [82416.155378] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [82416.155406] usb 1-1.4: Product: USB HUB 2.0 [82416.155432] usb 1-1.4: Manufacturer: GASIA Semi. [82416.157630] hub 1-1.4:1.0: USB hub found [82416.158780] hub 1-1.4:1.0: 4 ports detected [82416.454388] usb 1-1.4.4: new full-speed USB device number 46 using musb-hdrc [82416.574282] usb 1-1.4.4: not running at top speed; connect to a high speed hub [82416.574864] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [82416.574883] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [82416.574897] usb 1-1.4.4: Product: Arduino Due [82416.574910] usb 1-1.4.4: Manufacturer: Arduino LLC [82416.576332] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [82416.591348] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [82416.599100] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0017/input/input23 [82416.601222] hid-generic 0003:2341:003E.0017: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [84243.940474] usb 1-1.4.4: USB disconnect, device number 46 [84512.884173] CAUTION: musb: Babble Interrupt Occurred [84512.974591] usb 1-1: USB disconnect, device number 44 [84512.974634] usb 1-1.4: USB disconnect, device number 45 [84512.984239] musb-hdrc musb-hdrc.1.auto: Restarting MUSB to recover from Babble [84512.986329] musb-hdrc: setup fifo_mode 4 [84512.986379] musb-hdrc: 28/31 max ep, 16384/16384 memory [84513.384175] usb 1-1: new full-speed USB device number 47 using musb-hdrc [84513.525363] usb 1-1: New USB device found, idVendor=0e8f, idProduct=0016 [84513.525411] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [84513.525441] usb 1-1: Product: USB HUB 2.0 [84513.525466] usb 1-1: Manufacturer: GASIA Semi. [84513.527642] hub 1-1:1.0: USB hub found [84513.528773] hub 1-1:1.0: 4 ports detected [84513.824213] usb 1-1.4: new full-speed USB device number 48 using musb-hdrc [84513.945343] usb 1-1.4: New USB device found, idVendor=0e8f, idProduct=0016 [84513.945385] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [84513.945412] usb 1-1.4: Product: USB HUB 2.0 [84513.945438] usb 1-1.4: Manufacturer: GASIA Semi. [84513.947695] hub 1-1.4:1.0: USB hub found [84513.948950] hub 1-1.4:1.0: 4 ports detected [84514.244174] usb 1-1.4.4: new full-speed USB device number 49 using musb-hdrc [84514.364287] usb 1-1.4.4: not running at top speed; connect to a high speed hub [84514.364870] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [84514.364888] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [84514.364902] usb 1-1.4.4: Product: Arduino Due [84514.364915] usb 1-1.4.4: Manufacturer: Arduino LLC [84514.366304] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [84514.381710] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [84514.389714] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0018/input/input24 [84514.391858] hid-generic 0003:2341:003E.0018: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [85738.910486] usb 1-1.4.4: USB disconnect, device number 49 [85738.912305] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [85739.204331] usb 1-1.4.4: new full-speed USB device number 50 using musb-hdrc [85739.324404] usb 1-1.4.4: not running at top speed; connect to a high speed hub [85739.324980] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [85739.324993] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [85739.325002] usb 1-1.4.4: Product: Arduino Due [85739.325011] usb 1-1.4.4: Manufacturer: Arduino LLC [85739.327990] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [85739.349723] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [85739.364313] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0019/input/input25 [85739.369316] hid-generic 0003:2341:003E.0019: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [86861.883394] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [86862.156981] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [86862.429649] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [86862.702403] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [86862.976108] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [86863.249664] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [86863.522497] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [86863.795347] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [86864.068042] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [86864.341352] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [86864.614895] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [86864.885117] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [86865.151916] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [86865.424942] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [86865.697765] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [86865.755489] usb 1-1.4.4: USB disconnect, device number 50 [86865.756297] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [86866.044327] usb 1-1.4.4: new full-speed USB device number 51 using musb-hdrc [86866.164421] usb 1-1.4.4: not running at top speed; connect to a high speed hub [86866.165139] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [86866.165154] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [86866.165165] usb 1-1.4.4: Product: Arduino Due [86866.165175] usb 1-1.4.4: Manufacturer: Arduino LLC [86866.168641] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [86866.196598] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [86866.206420] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.001A/input/input26 [86866.215399] hid-generic 0003:2341:003E.001A: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [87860.221851] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [87860.488588] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [87860.514299] usb 1-1.4.2: new full-speed USB device number 52 using musb-hdrc [87860.634975] usb 1-1.4.2: not running at top speed; connect to a high speed hub [87860.637685] usb 1-1.4.2: New USB device found, idVendor=05dc, idProduct=a400 [87860.637723] usb 1-1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [87860.637752] usb 1-1.4.2: Product: JUMPDRIVE SECURE [87860.637778] usb 1-1.4.2: Manufacturer: LEXAR MEDIA [87860.637804] usb 1-1.4.2: SerialNumber: 106A6604221918121104 [87860.645149] usb-storage 1-1.4.2:1.0: USB Mass Storage device detected [87860.648495] scsi host3: usb-storage 1-1.4.2:1.0 [87860.650846] usb 1-1.4.4: USB disconnect, device number 51 [87860.654195] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [87860.944254] usb 1-1.4.4: new full-speed USB device number 53 using musb-hdrc [87861.064384] usb 1-1.4.4: not running at top speed; connect to a high speed hub [87861.064965] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [87861.064978] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [87861.064988] usb 1-1.4.4: Product: Arduino Due [87861.064996] usb 1-1.4.4: Manufacturer: Arduino LLC [87861.068191] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [87861.094251] alloc_contig_range: [9e86c, 9e86f) PFNs busy [87861.094384] alloc_contig_range: [9e86c, 9e86f) PFNs busy [87861.094522] alloc_contig_range: [9e86c, 9e86f) PFNs busy [87861.094657] alloc_contig_range: [9e86c, 9e86f) PFNs busy [87861.094785] alloc_contig_range: [9e86c, 9e86f) PFNs busy [87861.094910] alloc_contig_range: [9e86c, 9e86f) PFNs busy [87861.095098] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [87861.105210] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.001B/input/input27 [87861.106760] hid-generic 0003:2341:003E.001B: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [87861.646073] scsi 3:0:0:0: Direct-Access LEXAR JUMPDRIVE SECURE 1000 PQ: 0 ANSI: 0 CCS [87861.654388] sd 3:0:0:0: Attached scsi generic sg0 type 0 [87861.656977] sd 3:0:0:0: [sda] 2030592 512-byte logical blocks: (1.03 GB/991 MiB) [87861.658289] sd 3:0:0:0: [sda] Write Protect is off [87861.658333] sd 3:0:0:0: [sda] Mode Sense: 43 00 00 00 [87861.659593] sd 3:0:0:0: [sda] No Caching mode page found [87861.665396] sd 3:0:0:0: [sda] Assuming drive cache: write through [87861.741828] sda: sda1 [87861.747836] sd 3:0:0:0: [sda] Attached SCSI disk [87870.213917] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [87870.238592] EXT4-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended [87870.371746] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [87916.355413] usb 1-1.4.2: USB disconnect, device number 52 [87929.390192] usb 1-1.4.4: USB disconnect, device number 53 [87929.390624] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [87929.454809] usb 1-1.4: USB disconnect, device number 48 [87929.564229] hub 1-1.4:1.0: activate --> -19 [87929.834363] usb 1-1.4: new full-speed USB device number 54 using musb-hdrc [87929.955197] usb 1-1.4: New USB device found, idVendor=0e8f, idProduct=0016 [87929.955220] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [87929.955229] usb 1-1.4: Product: USB HUB 2.0 [87929.955237] usb 1-1.4: Manufacturer: GASIA Semi. [87929.958088] hub 1-1.4:1.0: USB hub found [87929.958490] hub 1-1.4:1.0: 4 ports detected [112110.464030] CAUTION: musb: Babble Interrupt Occurred [112110.554220] usb 1-1: USB disconnect, device number 47 [112110.554262] usb 1-1.4: USB disconnect, device number 54 [112110.564227] musb-hdrc musb-hdrc.1.auto: Restarting MUSB to recover from Babble [112110.566298] musb-hdrc: setup fifo_mode 4 [112110.566350] musb-hdrc: 28/31 max ep, 16384/16384 memory [112110.964067] usb 1-1: new full-speed USB device number 55 using musb-hdrc [112111.105300] usb 1-1: New USB device found, idVendor=0e8f, idProduct=0016 [112111.105343] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [112111.105371] usb 1-1: Product: USB HUB 2.0 [112111.105397] usb 1-1: Manufacturer: GASIA Semi. [112111.107557] hub 1-1:1.0: USB hub found [112111.108716] hub 1-1:1.0: 4 ports detected [112111.404063] usb 1-1.4: new full-speed USB device number 56 using musb-hdrc [112111.525269] usb 1-1.4: New USB device found, idVendor=0e8f, idProduct=0016 [112111.525314] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [112111.525341] usb 1-1.4: Product: USB HUB 2.0 [112111.525367] usb 1-1.4: Manufacturer: GASIA Semi. [112111.527560] hub 1-1.4:1.0: USB hub found [112111.528731] hub 1-1.4:1.0: 4 ports detected [112111.824303] usb 1-1.4.4: new full-speed USB device number 57 using musb-hdrc [112111.944182] usb 1-1.4.4: not running at top speed; connect to a high speed hub [112111.944764] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [112111.944781] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [112111.944796] usb 1-1.4.4: Product: Arduino Due [112111.944809] usb 1-1.4.4: Manufacturer: Arduino LLC [112111.949038] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [112111.961333] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [112111.969051] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.001C/input/input28 [112111.971279] hid-generic 0003:2341:003E.001C: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [112114.020412] usb 1-1.4.4: USB disconnect, device number 57 [112206.784038] CAUTION: musb: Babble Interrupt Occurred [112206.874220] usb 1-1: USB disconnect, device number 55 [112206.874262] usb 1-1.4: USB disconnect, device number 56 [112206.884147] musb-hdrc musb-hdrc.1.auto: Restarting MUSB to recover from Babble [112206.886224] musb-hdrc: setup fifo_mode 4 [112206.886276] musb-hdrc: 28/31 max ep, 16384/16384 memory [112207.284157] usb 1-1: new full-speed USB device number 58 using musb-hdrc [112207.425187] usb 1-1: New USB device found, idVendor=0e8f, idProduct=0016 [112207.425230] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [112207.425258] usb 1-1: Product: USB HUB 2.0 [112207.425283] usb 1-1: Manufacturer: GASIA Semi. [112207.430010] hub 1-1:1.0: USB hub found [112207.430311] hub 1-1:1.0: 4 ports detected [112207.724083] usb 1-1.4: new full-speed USB device number 59 using musb-hdrc [112207.844847] usb 1-1.4: New USB device found, idVendor=0e8f, idProduct=0016 [112207.844876] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [112207.844890] usb 1-1.4: Product: USB HUB 2.0 [112207.844903] usb 1-1.4: Manufacturer: GASIA Semi. [112207.848995] hub 1-1.4:1.0: USB hub found [112207.849184] hub 1-1.4:1.0: 4 ports detected [112208.144113] usb 1-1.4.3: new full-speed USB device number 60 using musb-hdrc [112208.264273] usb 1-1.4.3: not running at top speed; connect to a high speed hub [112208.265133] usb 1-1.4.3: New USB device found, idVendor=2341, idProduct=003e [112208.265168] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [112208.265195] usb 1-1.4.3: Product: Arduino Due [112208.265220] usb 1-1.4.3: Manufacturer: Arduino LLC [112208.267610] cdc_acm 1-1.4.3:1.0: This device cannot do calls on its own. It is not a modem. [112208.298896] cdc_acm 1-1.4.3:1.0: ttyACM0: USB ACM device [112208.313555] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.2/0003:2341:003E.001D/input/input29 [112208.318641] hid-generic 0003:2341:003E.001D: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.3/input2 [113387.205804] cdc_acm 1-1.4.3:1.0: failed to set dtr/rts [113387.484780] cdc_acm 1-1.4.3:1.0: failed to set dtr/rts [113387.761785] cdc_acm 1-1.4.3:1.0: failed to set dtr/rts [113388.040678] cdc_acm 1-1.4.3:1.0: failed to set dtr/rts [113388.323115] cdc_acm 1-1.4.3:1.0: failed to set dtr/rts [113388.611374] cdc_acm 1-1.4.3:1.0: failed to set dtr/rts [113388.887967] cdc_acm 1-1.4.3:1.0: failed to set dtr/rts [113389.162271] cdc_acm 1-1.4.3:1.0: failed to set dtr/rts [113389.446686] cdc_acm 1-1.4.3:1.0: failed to set dtr/rts [113389.729983] cdc_acm 1-1.4.3:1.0: failed to set dtr/rts [113390.019551] cdc_acm 1-1.4.3:1.0: failed to set dtr/rts [113390.306616] cdc_acm 1-1.4.3:1.0: failed to set dtr/rts [113390.589979] cdc_acm 1-1.4.3:1.0: failed to set dtr/rts [113390.872346] cdc_acm 1-1.4.3:1.0: failed to set dtr/rts [113390.990396] usb 1-1.4.3: USB disconnect, device number 60 [113390.991100] cdc_acm 1-1.4.3:1.0: failed to set dtr/rts [113391.274198] usb 1-1.4.3: new full-speed USB device number 61 using musb-hdrc [113391.394273] usb 1-1.4.3: not running at top speed; connect to a high speed hub [113391.394918] usb 1-1.4.3: New USB device found, idVendor=2341, idProduct=003e [113391.394935] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [113391.394946] usb 1-1.4.3: Product: Arduino Due [113391.394957] usb 1-1.4.3: Manufacturer: Arduino LLC [113391.398410] cdc_acm 1-1.4.3:1.0: This device cannot do calls on its own. It is not a modem. [113391.420658] cdc_acm 1-1.4.3:1.0: ttyACM0: USB ACM device [113391.434763] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.2/0003:2341:003E.001E/input/input30 [113391.436538] hid-generic 0003:2341:003E.001E: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.3/input2 [114277.370382] usb 1-1.4.3: USB disconnect, device number 61 [114277.634207] usb 1-1.4.3: new full-speed USB device number 62 using musb-hdrc [114277.754194] usb 1-1.4.3: not running at top speed; connect to a high speed hub [114277.754789] usb 1-1.4.3: New USB device found, idVendor=2341, idProduct=003e [114277.754808] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [114277.754822] usb 1-1.4.3: Product: Arduino Due [114277.754835] usb 1-1.4.3: Manufacturer: Arduino LLC [114277.759032] cdc_acm 1-1.4.3:1.0: This device cannot do calls on its own. It is not a modem. [114277.771483] cdc_acm 1-1.4.3:1.0: ttyACM0: USB ACM device [114277.779143] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.2/0003:2341:003E.001F/input/input31 [114277.781240] hid-generic 0003:2341:003E.001F: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.3/input2 [117470.111511] cdc_acm 1-1.4.3:1.0: failed to set dtr/rts [117470.384169] cdc_acm 1-1.4.3:1.0: failed to set dtr/rts [117470.655698] cdc_acm 1-1.4.3:1.0: failed to set dtr/rts [117470.735259] usb 1-1.4.3: USB disconnect, device number 62 [117470.735691] cdc_acm 1-1.4.3:1.0: failed to set dtr/rts [117471.024179] usb 1-1.4.3: new full-speed USB device number 63 using musb-hdrc [117471.144246] usb 1-1.4.3: not running at top speed; connect to a high speed hub [117471.144833] usb 1-1.4.3: New USB device found, idVendor=2341, idProduct=003e [117471.144848] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [117471.144858] usb 1-1.4.3: Product: Arduino Due [117471.144866] usb 1-1.4.3: Manufacturer: Arduino LLC [117471.147897] cdc_acm 1-1.4.3:1.0: This device cannot do calls on its own. It is not a modem. [117471.169784] cdc_acm 1-1.4.3:1.0: ttyACM0: USB ACM device [117471.184749] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.2/0003:2341:003E.0020/input/input32 [117471.189236] hid-generic 0003:2341:003E.0020: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.3/input2 [118589.675381] usb 1-1.4.3: USB disconnect, device number 63 [118589.676092] cdc_acm 1-1.4.3:1.0: failed to set dtr/rts [118589.964157] usb 1-1.4.3: new full-speed USB device number 64 using musb-hdrc [118590.084242] usb 1-1.4.3: not running at top speed; connect to a high speed hub [118590.084830] usb 1-1.4.3: New USB device found, idVendor=2341, idProduct=003e [118590.084844] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [118590.084854] usb 1-1.4.3: Product: Arduino Due [118590.084863] usb 1-1.4.3: Manufacturer: Arduino LLC [118590.087866] cdc_acm 1-1.4.3:1.0: This device cannot do calls on its own. It is not a modem. [118590.115643] cdc_acm 1-1.4.3:1.0: ttyACM0: USB ACM device [118590.124528] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.2/0003:2341:003E.0021/input/input33 [118590.126306] hid-generic 0003:2341:003E.0021: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.3/input2 [119711.664815] cdc_acm 1-1.4.3:1.0: failed to set dtr/rts [119711.675352] usb 1-1.4.3: USB disconnect, device number 64 [119711.675791] cdc_acm 1-1.4.3:1.0: failed to set dtr/rts [119711.954164] usb 1-1.4.3: new full-speed USB device number 65 using musb-hdrc [119712.074252] usb 1-1.4.3: not running at top speed; connect to a high speed hub [119712.074876] usb 1-1.4.3: New USB device found, idVendor=2341, idProduct=003e [119712.074892] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [119712.074903] usb 1-1.4.3: Product: Arduino Due [119712.074913] usb 1-1.4.3: Manufacturer: Arduino LLC [119712.076081] cdc_acm 1-1.4.3:1.0: This device cannot do calls on its own. It is not a modem. [119712.104845] cdc_acm 1-1.4.3:1.0: ttyACM0: USB ACM device [119712.115446] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.2/0003:2341:003E.0022/input/input34 [119712.117221] hid-generic 0003:2341:003E.0022: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.3/input2 [120487.385450] usb 1-1.4.3: USB disconnect, device number 65 [120487.654062] usb 1-1.4.3: new full-speed USB device number 66 using musb-hdrc [120487.774322] usb 1-1.4.3: not running at top speed; connect to a high speed hub [120487.775164] usb 1-1.4.3: New USB device found, idVendor=2341, idProduct=003e [120487.775199] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [120487.775227] usb 1-1.4.3: Product: Arduino Due [120487.775252] usb 1-1.4.3: Manufacturer: Arduino LLC [120487.785480] cdc_acm 1-1.4.3:1.0: This device cannot do calls on its own. It is not a modem. [120487.817106] cdc_acm 1-1.4.3:1.0: ttyACM0: USB ACM device [120487.834374] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.2/0003:2341:003E.0023/input/input35 [120487.841967] hid-generic 0003:2341:003E.0023: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.3/input2 [120487.854298] usb 1-1.1: new full-speed USB device number 67 using musb-hdrc [120487.975495] usb 1-1.1: not running at top speed; connect to a high speed hub [120487.978644] usb 1-1.1: New USB device found, idVendor=05dc, idProduct=a400 [120487.978688] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [120487.978716] usb 1-1.1: Product: JUMPDRIVE SECURE [120487.978741] usb 1-1.1: Manufacturer: LEXAR MEDIA [120487.978767] usb 1-1.1: SerialNumber: 106A6604221918121104 [120487.982044] usb-storage 1-1.1:1.0: USB Mass Storage device detected [120487.993060] scsi host4: usb-storage 1-1.1:1.0 [120488.995872] scsi 4:0:0:0: Direct-Access LEXAR JUMPDRIVE SECURE 1000 PQ: 0 ANSI: 0 CCS [120489.003362] sd 4:0:0:0: Attached scsi generic sg0 type 0 [120489.006248] sd 4:0:0:0: [sda] 2030592 512-byte logical blocks: (1.03 GB/991 MiB) [120489.007472] sd 4:0:0:0: [sda] Write Protect is off [120489.007515] sd 4:0:0:0: [sda] Mode Sense: 43 00 00 00 [120489.008749] sd 4:0:0:0: [sda] No Caching mode page found [120489.014642] sd 4:0:0:0: [sda] Assuming drive cache: write through [120489.096042] sda: sda1 [120489.101721] sd 4:0:0:0: [sda] Attached SCSI disk [120490.913971] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [120490.937083] EXT4-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended [120491.062259] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [120540.710228] usb 1-1.4.3: USB disconnect, device number 66 [120540.769432] usb 1-1.1: USB disconnect, device number 67 [120540.824105] usb 1-1.4: reset full-speed USB device number 59 using musb-hdrc [120541.264304] usb 1-1.4.3: new full-speed USB device number 68 using musb-hdrc [120541.384522] usb 1-1.4.3: not running at top speed; connect to a high speed hub [120541.385743] usb 1-1.4.3: New USB device found, idVendor=2341, idProduct=003e [120541.385791] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [120541.385818] usb 1-1.4.3: Product: Arduino Due [120541.385844] usb 1-1.4.3: Manufacturer: Arduino LLC [120541.390845] cdc_acm 1-1.4.3:1.0: This device cannot do calls on its own. It is not a modem. [120541.404003] cdc_acm 1-1.4.3:1.0: ttyACM0: USB ACM device [120541.410864] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.2/0003:2341:003E.0024/input/input36 [120541.413109] hid-generic 0003:2341:003E.0024: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.3/input2 [120543.293977] CAUTION: musb: Babble Interrupt Occurred [120543.294234] usb 1-1: USB disconnect, device number 58 [120543.294253] usb 1-1.4: USB disconnect, device number 59 [120543.294269] usb 1-1.4.3: USB disconnect, device number 68 [120543.393954] musb-hdrc musb-hdrc.1.auto: Restarting MUSB to recover from Babble [120543.395862] musb-hdrc: setup fifo_mode 4 [120543.395887] musb-hdrc: 28/31 max ep, 16384/16384 memory [120543.794035] usb 1-1: new full-speed USB device number 69 using musb-hdrc [120543.935308] usb 1-1: New USB device found, idVendor=0e8f, idProduct=0016 [120543.935357] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [120543.935384] usb 1-1: Product: USB HUB 2.0 [120543.935410] usb 1-1: Manufacturer: GASIA Semi. [120543.945346] hub 1-1:1.0: USB hub found [120543.945633] hub 1-1:1.0: 4 ports detected [120544.244066] usb 1-1.4: new full-speed USB device number 70 using musb-hdrc [120544.365178] usb 1-1.4: New USB device found, idVendor=0e8f, idProduct=0016 [120544.365221] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [120544.365249] usb 1-1.4: Product: USB HUB 2.0 [120544.365275] usb 1-1.4: Manufacturer: GASIA Semi. [120544.371975] hub 1-1.4:1.0: USB hub found [120544.374156] hub 1-1.4:1.0: 4 ports detected [217050.763797] CAUTION: musb: Babble Interrupt Occurred [217050.853769] usb 1-1: USB disconnect, device number 69 [217050.853798] usb 1-1.4: USB disconnect, device number 70 [217050.863695] musb-hdrc musb-hdrc.1.auto: Restarting MUSB to recover from Babble [217050.865675] musb-hdrc: setup fifo_mode 4 [217050.865705] musb-hdrc: 28/31 max ep, 16384/16384 memory [217051.263713] usb 1-1: new full-speed USB device number 71 using musb-hdrc [217051.405780] usb 1-1: New USB device found, idVendor=0e8f, idProduct=0016 [217051.405828] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [217051.405855] usb 1-1: Product: USB HUB 2.0 [217051.405881] usb 1-1: Manufacturer: GASIA Semi. [217051.414924] hub 1-1:1.0: USB hub found [217051.416585] hub 1-1:1.0: 4 ports detected [217051.713686] usb 1-1.4: new full-speed USB device number 72 using musb-hdrc [217051.834918] usb 1-1.4: New USB device found, idVendor=0e8f, idProduct=0016 [217051.834963] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [217051.834991] usb 1-1.4: Product: USB HUB 2.0 [217051.835017] usb 1-1.4: Manufacturer: GASIA Semi. [217051.841811] hub 1-1.4:1.0: USB hub found [217051.842094] hub 1-1.4:1.0: 4 ports detected [217052.143697] usb 1-1.4.4: new full-speed USB device number 73 using musb-hdrc [217052.263786] usb 1-1.4.4: not running at top speed; connect to a high speed hub [217052.264391] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [217052.264410] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [217052.264424] usb 1-1.4.4: Product: Arduino Due [217052.264438] usb 1-1.4.4: Manufacturer: Arduino LLC [217052.265875] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [217052.282240] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [217052.290077] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0025/input/input37 [217052.292225] hid-generic 0003:2341:003E.0025: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [218248.431623] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [218248.704564] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [218248.977231] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [218249.250083] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [218249.523467] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [218249.796372] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [218250.068266] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [218250.334653] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [218250.544965] usb 1-1.4.4: USB disconnect, device number 73 [218250.545678] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [218250.834234] usb 1-1.4.4: new full-speed USB device number 74 using musb-hdrc [218250.953864] usb 1-1.4.4: not running at top speed; connect to a high speed hub [218250.954467] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [218250.954481] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [218250.954490] usb 1-1.4.4: Product: Arduino Due [218250.954498] usb 1-1.4.4: Manufacturer: Arduino LLC [218250.957565] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [218250.991026] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [218251.002530] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0026/input/input38 [218251.004714] hid-generic 0003:2341:003E.0026: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [219377.899967] usb 1-1.4.4: USB disconnect, device number 74 [219377.900666] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [219378.183729] usb 1-1.4.4: new full-speed USB device number 75 using musb-hdrc [219378.303912] usb 1-1.4.4: not running at top speed; connect to a high speed hub [219378.304488] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [219378.304502] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [219378.304511] usb 1-1.4.4: Product: Arduino Due [219378.304519] usb 1-1.4.4: Manufacturer: Arduino LLC [219378.307542] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [219378.334127] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [219378.342866] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0027/input/input39 [219378.345167] hid-generic 0003:2341:003E.0027: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [220505.233597] CAUTION: musb: Babble Interrupt Occurred [220505.234059] usb 1-1: USB disconnect, device number 71 [220505.234096] usb 1-1.4: USB disconnect, device number 72 [220505.234124] usb 1-1.4.4: USB disconnect, device number 75 [220505.234877] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [220505.333822] musb-hdrc musb-hdrc.1.auto: Restarting MUSB to recover from Babble [220505.335923] musb-hdrc: setup fifo_mode 4 [220505.335973] musb-hdrc: 28/31 max ep, 16384/16384 memory [220505.733684] usb 1-1: new full-speed USB device number 76 using musb-hdrc [220505.874502] usb 1-1: New USB device found, idVendor=0e8f, idProduct=0016 [220505.874523] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [220505.874532] usb 1-1: Product: USB HUB 2.0 [220505.874540] usb 1-1: Manufacturer: GASIA Semi. [220505.877239] hub 1-1:1.0: USB hub found [220505.877675] hub 1-1:1.0: 4 ports detected [220506.173746] usb 1-1.4: new full-speed USB device number 77 using musb-hdrc [220506.294550] usb 1-1.4: New USB device found, idVendor=0e8f, idProduct=0016 [220506.294571] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [220506.294581] usb 1-1.4: Product: USB HUB 2.0 [220506.294589] usb 1-1.4: Manufacturer: GASIA Semi. [220506.297432] hub 1-1.4:1.0: USB hub found [220506.297784] hub 1-1.4:1.0: 4 ports detected [220506.593760] usb 1-1.4.4: new full-speed USB device number 78 using musb-hdrc [220506.713973] usb 1-1.4.4: not running at top speed; connect to a high speed hub [220506.714683] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [220506.714699] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [220506.714708] usb 1-1.4.4: Product: Arduino Due [220506.714717] usb 1-1.4.4: Manufacturer: Arduino LLC [220506.717778] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [220506.748536] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [220506.758143] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0028/input/input40 [220506.759880] hid-generic 0003:2341:003E.0028: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [221475.334651] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [221475.493751] usb 1-1.4.2: new full-speed USB device number 79 using musb-hdrc [221475.608391] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [221475.615257] usb 1-1.4.2: not running at top speed; connect to a high speed hub [221475.618197] usb 1-1.4.2: New USB device found, idVendor=05dc, idProduct=a400 [221475.618241] usb 1-1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [221475.618271] usb 1-1.4.2: Product: JUMPDRIVE SECURE [221475.618297] usb 1-1.4.2: Manufacturer: LEXAR MEDIA [221475.618322] usb 1-1.4.2: SerialNumber: 106A6604221918121104 [221475.625134] usb-storage 1-1.4.2:1.0: USB Mass Storage device detected [221475.633197] scsi host5: usb-storage 1-1.4.2:1.0 [221475.635898] usb 1-1.4.4: USB disconnect, device number 78 [221475.637861] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [221475.923761] usb 1-1.4.4: new full-speed USB device number 80 using musb-hdrc [221476.043926] usb 1-1.4.4: not running at top speed; connect to a high speed hub [221476.044552] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [221476.044564] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [221476.044573] usb 1-1.4.4: Product: Arduino Due [221476.044582] usb 1-1.4.4: Manufacturer: Arduino LLC [221476.047598] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [221476.075771] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [221476.084815] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0029/input/input41 [221476.086372] hid-generic 0003:2341:003E.0029: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [221476.635033] scsi 5:0:0:0: Direct-Access LEXAR JUMPDRIVE SECURE 1000 PQ: 0 ANSI: 0 CCS [221476.637017] sd 5:0:0:0: Attached scsi generic sg0 type 0 [221476.638999] sd 5:0:0:0: [sda] 2030592 512-byte logical blocks: (1.03 GB/991 MiB) [221476.640159] sd 5:0:0:0: [sda] Write Protect is off [221476.640184] sd 5:0:0:0: [sda] Mode Sense: 43 00 00 00 [221476.641291] sd 5:0:0:0: [sda] No Caching mode page found [221476.647098] sd 5:0:0:0: [sda] Assuming drive cache: write through [221476.720524] sda: sda1 [221476.724969] sd 5:0:0:0: [sda] Attached SCSI disk [221492.953146] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [221492.975791] EXT4-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended [221493.106178] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [221511.450013] usb 1-1.4.2: USB disconnect, device number 79 [221511.613957] usb 1-1.4-port4: disabled by hub (EMI?), re-enabling... [221511.620834] usb 1-1.4.4: USB disconnect, device number 80 [221511.893792] usb 1-1.4.4: new full-speed USB device number 81 using musb-hdrc [221512.013912] usb 1-1.4.4: not running at top speed; connect to a high speed hub [221512.014730] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [221512.014766] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [221512.014794] usb 1-1.4.4: Product: Arduino Due [221512.014819] usb 1-1.4.4: Manufacturer: Arduino LLC [221512.025112] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [221512.048050] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [221512.074678] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.002A/input/input42 [221512.076300] hid-generic 0003:2341:003E.002A: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [224423.603418] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [224423.876588] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [224424.164580] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [224424.434848] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [224424.701849] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [224424.974783] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [224425.080021] usb 1-1.4.4: USB disconnect, device number 81 [224425.080726] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [224425.363783] usb 1-1.4.4: new full-speed USB device number 82 using musb-hdrc [224425.483872] usb 1-1.4.4: not running at top speed; connect to a high speed hub [224425.484460] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [224425.484474] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [224425.484483] usb 1-1.4.4: Product: Arduino Due [224425.484491] usb 1-1.4.4: Manufacturer: Arduino LLC [224425.487506] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [224425.514034] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [224425.525907] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.002B/input/input43 [224425.527626] hid-generic 0003:2341:003E.002B: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [225548.864905] usb 1-1.4.4: USB disconnect, device number 82 [225548.865337] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [225549.143955] usb 1-1.4.4: new full-speed USB device number 83 using musb-hdrc [225549.263870] usb 1-1.4.4: not running at top speed; connect to a high speed hub [225549.264462] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [225549.264477] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [225549.264486] usb 1-1.4.4: Product: Arduino Due [225549.264494] usb 1-1.4.4: Manufacturer: Arduino LLC [225549.267545] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [225549.294828] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [225549.308465] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.002C/input/input44 [225549.310011] hid-generic 0003:2341:003E.002C: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [226672.395033] usb 1-1.4.4: USB disconnect, device number 83 [226672.395740] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [226672.683717] usb 1-1.4.4: new full-speed USB device number 84 using musb-hdrc [226672.803934] usb 1-1.4.4: not running at top speed; connect to a high speed hub [226672.804783] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [226672.804803] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [226672.804818] usb 1-1.4.4: Product: Arduino Due [226672.804831] usb 1-1.4.4: Manufacturer: Arduino LLC [226672.809113] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [226672.839616] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [226672.850316] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.002D/input/input45 [226672.851859] hid-generic 0003:2341:003E.002D: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [227277.651623] CAUTION: musb: Babble Interrupt Occurred [227277.652115] usb 1-1: USB disconnect, device number 76 [227277.652151] usb 1-1.4: USB disconnect, device number 77 [227277.652180] usb 1-1.4.4: USB disconnect, device number 84 [227277.652870] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [227277.743692] musb-hdrc musb-hdrc.1.auto: Restarting MUSB to recover from Babble [227277.745829] musb-hdrc: setup fifo_mode 4 [227277.745878] musb-hdrc: 28/31 max ep, 16384/16384 memory [227278.143675] usb 1-1: new full-speed USB device number 85 using musb-hdrc [227278.284553] usb 1-1: New USB device found, idVendor=0e8f, idProduct=0016 [227278.284573] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [227278.284582] usb 1-1: Product: USB HUB 2.0 [227278.284590] usb 1-1: Manufacturer: GASIA Semi. [227278.287252] hub 1-1:1.0: USB hub found [227278.287602] hub 1-1:1.0: 4 ports detected [227278.583704] usb 1-1.4: new full-speed USB device number 86 using musb-hdrc [227278.704415] usb 1-1.4: New USB device found, idVendor=0e8f, idProduct=0016 [227278.704437] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [227278.704446] usb 1-1.4: Product: USB HUB 2.0 [227278.704454] usb 1-1.4: Manufacturer: GASIA Semi. [227278.707272] hub 1-1.4:1.0: USB hub found [227278.707850] hub 1-1.4:1.0: 4 ports detected [227279.003757] usb 1-1.4.2: new full-speed USB device number 87 using musb-hdrc [227279.124379] usb 1-1.4.2: not running at top speed; connect to a high speed hub [227279.126965] usb 1-1.4.2: New USB device found, idVendor=05dc, idProduct=a400 [227279.126984] usb 1-1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [227279.126994] usb 1-1.4.2: Product: JUMPDRIVE SECURE [227279.127002] usb 1-1.4.2: Manufacturer: LEXAR MEDIA [227279.127010] usb 1-1.4.2: SerialNumber: 106A6604221918121104 [227279.130045] usb-storage 1-1.4.2:1.0: USB Mass Storage device detected [227279.136390] scsi host6: usb-storage 1-1.4.2:1.0 [227279.233727] usb 1-1.4.4: new full-speed USB device number 88 using musb-hdrc [227279.353859] usb 1-1.4.4: not running at top speed; connect to a high speed hub [227279.354554] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [227279.354567] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [227279.354576] usb 1-1.4.4: Product: Arduino Due [227279.354584] usb 1-1.4.4: Manufacturer: Arduino LLC [227279.357703] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [227279.379255] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [227279.388466] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.002E/input/input46 [227279.389966] hid-generic 0003:2341:003E.002E: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [227280.135364] scsi 6:0:0:0: Direct-Access LEXAR JUMPDRIVE SECURE 1000 PQ: 0 ANSI: 0 CCS [227280.142937] sd 6:0:0:0: Attached scsi generic sg0 type 0 [227280.145704] sd 6:0:0:0: [sda] 2030592 512-byte logical blocks: (1.03 GB/991 MiB) [227280.146935] sd 6:0:0:0: [sda] Write Protect is off [227280.146979] sd 6:0:0:0: [sda] Mode Sense: 43 00 00 00 [227280.148139] sd 6:0:0:0: [sda] No Caching mode page found [227280.154018] sd 6:0:0:0: [sda] Assuming drive cache: write through [227280.222996] sda: sda1 [227280.229434] sd 6:0:0:0: [sda] Attached SCSI disk [227297.960207] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [227297.984001] EXT4-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended [227298.108948] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [227319.876628] CAUTION: musb: Babble Interrupt Occurred [227319.877178] usb 1-1: USB disconnect, device number 85 [227319.877216] usb 1-1.4: USB disconnect, device number 86 [227319.877245] usb 1-1.4.2: USB disconnect, device number 87 [227319.898926] usb 1-1.4.4: USB disconnect, device number 88 [227319.973653] musb-hdrc musb-hdrc.1.auto: Restarting MUSB to recover from Babble [227319.975558] musb-hdrc: setup fifo_mode 4 [227319.975588] musb-hdrc: 28/31 max ep, 16384/16384 memory [227320.373628] usb 1-1: new full-speed USB device number 89 using musb-hdrc [227320.515037] usb 1-1: New USB device found, idVendor=0e8f, idProduct=0016 [227320.515086] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [227320.515116] usb 1-1: Product: USB HUB 2.0 [227320.515141] usb 1-1: Manufacturer: GASIA Semi. [227320.524915] hub 1-1:1.0: USB hub found [227320.527746] hub 1-1:1.0: 4 ports detected [227320.823578] usb 1-1.4: new full-speed USB device number 90 using musb-hdrc [227320.944880] usb 1-1.4: New USB device found, idVendor=0e8f, idProduct=0016 [227320.944926] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [227320.944954] usb 1-1.4: Product: USB HUB 2.0 [227320.944980] usb 1-1.4: Manufacturer: GASIA Semi. [227320.947212] hub 1-1.4:1.0: USB hub found [227320.948549] hub 1-1.4:1.0: 4 ports detected [227321.243584] usb 1-1.4.4: new full-speed USB device number 91 using musb-hdrc [227321.363787] usb 1-1.4.4: not running at top speed; connect to a high speed hub [227321.364376] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [227321.364394] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [227321.364408] usb 1-1.4.4: Product: Arduino Due [227321.364421] usb 1-1.4.4: Manufacturer: Arduino LLC [227321.365931] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [227321.380989] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [227321.388673] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.002F/input/input47 [227321.390805] hid-generic 0003:2341:003E.002F: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [230080.929668] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [230081.202682] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [230081.480065] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [230081.752811] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [230082.026850] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [230082.300457] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [230082.573271] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [230082.844899] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [230083.050069] usb 1-1.4.4: USB disconnect, device number 91 [230083.050783] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [230083.333667] usb 1-1.4.4: new full-speed USB device number 92 using musb-hdrc [230083.433916] usb 1-1.4.4: not running at top speed; connect to a high speed hub [230083.434554] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [230083.434572] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [230083.434583] usb 1-1.4.4: Product: Arduino Due [230083.434593] usb 1-1.4.4: Manufacturer: Arduino LLC [230083.438064] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [230083.474348] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [230083.484827] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0030/input/input48 [230083.489221] hid-generic 0003:2341:003E.0030: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [231207.699891] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [231207.972886] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [231208.246205] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [231208.519078] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [231208.792128] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [231209.064997] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [231209.331817] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [231209.604683] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [231209.878047] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [231210.150831] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [231210.405089] usb 1-1.4.4: USB disconnect, device number 92 [231210.405805] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [231210.693761] usb 1-1.4.4: new full-speed USB device number 93 using musb-hdrc [231210.813868] usb 1-1.4.4: not running at top speed; connect to a high speed hub [231210.814491] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [231210.814505] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [231210.814514] usb 1-1.4.4: Product: Arduino Due [231210.814522] usb 1-1.4.4: Manufacturer: Arduino LLC [231210.817550] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [231210.839320] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [231210.852958] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0031/input/input49 [231210.855282] hid-generic 0003:2341:003E.0031: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [232335.298833] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [232335.572033] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [232335.845374] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [232336.125873] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [232336.398851] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [232336.672906] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [232336.946014] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [232337.219114] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [232337.492379] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [232337.768349] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [232338.044768] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [232338.322661] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [232338.589621] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [232338.865757] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [232339.146224] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [232339.290095] usb 1-1.4.4: USB disconnect, device number 93 [232339.290810] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [232339.583801] usb 1-1.4.4: new full-speed USB device number 94 using musb-hdrc [232339.703838] usb 1-1.4.4: not running at top speed; connect to a high speed hub [232339.704429] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [232339.704442] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [232339.704451] usb 1-1.4.4: Product: Arduino Due [232339.704460] usb 1-1.4.4: Manufacturer: Arduino LLC [232339.709571] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [232339.742487] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [232339.754282] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0032/input/input50 [232339.755839] hid-generic 0003:2341:003E.0032: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [232407.404837] usb 1-1.4.4: USB disconnect, device number 94 [232407.405555] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [232407.533843] usb 1-1.4: reset full-speed USB device number 90 using musb-hdrc [232407.973781] usb 1-1.4.2: new full-speed USB device number 95 using musb-hdrc [232408.094417] usb 1-1.4.2: not running at top speed; connect to a high speed hub [232408.097046] usb 1-1.4.2: New USB device found, idVendor=05dc, idProduct=a400 [232408.097065] usb 1-1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [232408.097074] usb 1-1.4.2: Product: JUMPDRIVE SECURE [232408.097083] usb 1-1.4.2: Manufacturer: LEXAR MEDIA [232408.097091] usb 1-1.4.2: SerialNumber: 106A6604221918121104 [232408.100064] usb-storage 1-1.4.2:1.0: USB Mass Storage device detected [232408.107022] scsi host7: usb-storage 1-1.4.2:1.0 [232408.203744] usb 1-1.4.4: new full-speed USB device number 96 using musb-hdrc [232408.323856] usb 1-1.4.4: not running at top speed; connect to a high speed hub [232408.324511] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [232408.324525] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [232408.324535] usb 1-1.4.4: Product: Arduino Due [232408.324543] usb 1-1.4.4: Manufacturer: Arduino LLC [232408.327567] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [232408.349431] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [232408.364319] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0033/input/input51 [232408.369307] hid-generic 0003:2341:003E.0033: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [232409.105405] scsi 7:0:0:0: Direct-Access LEXAR JUMPDRIVE SECURE 1000 PQ: 0 ANSI: 0 CCS [232409.110145] sd 7:0:0:0: Attached scsi generic sg0 type 0 [232409.112891] sd 7:0:0:0: [sda] 2030592 512-byte logical blocks: (1.03 GB/991 MiB) [232409.114125] sd 7:0:0:0: [sda] Write Protect is off [232409.114168] sd 7:0:0:0: [sda] Mode Sense: 43 00 00 00 [232409.115386] sd 7:0:0:0: [sda] No Caching mode page found [232409.121176] sd 7:0:0:0: [sda] Assuming drive cache: write through [232409.208874] sda: sda1 [232409.214947] sd 7:0:0:0: [sda] Attached SCSI disk [232423.349111] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [232423.372387] EXT4-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended [232423.497273] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [232445.104115] usb 1-1.4.2: USB disconnect, device number 95 [232445.273870] usb 1-1.4-port4: disabled by hub (EMI?), re-enabling... [232445.280735] usb 1-1.4.4: USB disconnect, device number 96 [232445.553555] usb 1-1.4.4: new full-speed USB device number 97 using musb-hdrc [232445.673903] usb 1-1.4.4: not running at top speed; connect to a high speed hub [232445.674665] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [232445.674701] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [232445.674729] usb 1-1.4.4: Product: Arduino Due [232445.674755] usb 1-1.4.4: Manufacturer: Arduino LLC [232445.677152] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [232445.696627] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [232445.719532] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0034/input/input52 [232445.725060] hid-generic 0003:2341:003E.0034: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [252336.124014] usb 1-1.4.4: USB disconnect, device number 97 [252398.723655] usb 1-1.4.4: new full-speed USB device number 98 using musb-hdrc [252398.843761] usb 1-1.4.4: not running at top speed; connect to a high speed hub [252398.844574] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [252398.844608] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [252398.844636] usb 1-1.4.4: Product: Arduino Due [252398.844663] usb 1-1.4.4: Manufacturer: Arduino LLC [252398.847062] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [252398.867350] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [252398.880831] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0035/input/input53 [252398.886198] hid-generic 0003:2341:003E.0035: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [253610.327893] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [253610.383906] usb 1-1.4.4: USB disconnect, device number 98 [253610.384614] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [253610.673669] usb 1-1.4.4: new full-speed USB device number 99 using musb-hdrc [253610.793792] usb 1-1.4.4: not running at top speed; connect to a high speed hub [253610.794562] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [253610.794582] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [253610.794596] usb 1-1.4.4: Product: Arduino Due [253610.794609] usb 1-1.4.4: Manufacturer: Arduino LLC [253610.798847] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [253610.830173] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [253610.839999] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0036/input/input54 [253610.844822] hid-generic 0003:2341:003E.0036: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [254737.739071] usb 1-1.4.4: USB disconnect, device number 99 [254737.739535] cdc_acm 1-1.4.4:1.0: acm_ctrl_irq - usb_submit_urb failed: -19 [254737.757811] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [254738.043598] usb 1-1.4.4: new full-speed USB device number 100 using musb-hdrc [254738.163737] usb 1-1.4.4: device descriptor read/all, error -71 [254738.273583] usb 1-1.4.4: new full-speed USB device number 101 using musb-hdrc [254738.393800] usb 1-1.4.4: not running at top speed; connect to a high speed hub [254738.394423] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [254738.394436] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [254738.394445] usb 1-1.4.4: Product: Arduino Due [254738.394454] usb 1-1.4.4: Manufacturer: Arduino LLC [254738.397497] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [254738.418450] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [254738.431599] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0037/input/input55 [254738.433117] hid-generic 0003:2341:003E.0037: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [255865.542400] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [255865.603900] usb 1-1.4.4: USB disconnect, device number 101 [255865.604609] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [255865.893646] usb 1-1.4.4: new full-speed USB device number 102 using musb-hdrc [255866.013785] usb 1-1.4.4: not running at top speed; connect to a high speed hub [255866.014451] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [255866.014466] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [255866.014477] usb 1-1.4.4: Product: Arduino Due [255866.014487] usb 1-1.4.4: Manufacturer: Arduino LLC [255866.017933] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [255866.043739] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [255866.054686] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0038/input/input56 [255866.059417] hid-generic 0003:2341:003E.0038: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [256991.469092] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [256991.737281] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [256992.004293] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [256992.278018] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [256992.564337] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [256992.845002] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [256993.111784] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [256993.384946] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [256993.658470] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [256993.932069] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [256994.199096] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [256994.486442] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [256994.759800] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [256995.047420] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [256995.321069] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [256995.595628] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [256995.869498] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [256996.149580] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [256996.273885] usb 1-1.4.4: USB disconnect, device number 102 [256996.274591] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [256996.573659] usb 1-1.4.4: new full-speed USB device number 103 using musb-hdrc [256996.693744] usb 1-1.4.4: not running at top speed; connect to a high speed hub [256996.694360] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [256996.694373] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [256996.694382] usb 1-1.4.4: Product: Arduino Due [256996.694390] usb 1-1.4.4: Manufacturer: Arduino LLC [256996.697422] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [256996.723484] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [256996.743689] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0039/input/input57 [256996.745263] hid-generic 0003:2341:003E.0039: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [257279.802993] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [257280.076906] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [257280.093725] usb 1-1.4.2: new full-speed USB device number 104 using musb-hdrc [257280.214298] usb 1-1.4.2: not running at top speed; connect to a high speed hub [257280.216978] usb 1-1.4.2: New USB device found, idVendor=05dc, idProduct=a400 [257280.217013] usb 1-1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [257280.217041] usb 1-1.4.2: Product: JUMPDRIVE SECURE [257280.217066] usb 1-1.4.2: Manufacturer: LEXAR MEDIA [257280.217092] usb 1-1.4.2: SerialNumber: 106A6604221918121104 [257280.224499] usb-storage 1-1.4.2:1.0: USB Mass Storage device detected [257280.227739] scsi host8: usb-storage 1-1.4.2:1.0 [257280.230083] usb 1-1.4.4: USB disconnect, device number 103 [257280.233270] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [257280.533618] usb 1-1.4.4: new full-speed USB device number 105 using musb-hdrc [257280.653727] usb 1-1.4.4: not running at top speed; connect to a high speed hub [257280.654397] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [257280.654415] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [257280.654426] usb 1-1.4.4: Product: Arduino Due [257280.654437] usb 1-1.4.4: Manufacturer: Arduino LLC [257280.657880] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [257280.694305] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [257280.704587] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.003A/input/input58 [257280.706144] hid-generic 0003:2341:003E.003A: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [257281.224925] scsi 8:0:0:0: Direct-Access LEXAR JUMPDRIVE SECURE 1000 PQ: 0 ANSI: 0 CCS [257281.229409] sd 8:0:0:0: Attached scsi generic sg0 type 0 [257281.231528] sd 8:0:0:0: [sda] 2030592 512-byte logical blocks: (1.03 GB/991 MiB) [257281.232706] sd 8:0:0:0: [sda] Write Protect is off [257281.232733] sd 8:0:0:0: [sda] Mode Sense: 43 00 00 00 [257281.233883] sd 8:0:0:0: [sda] No Caching mode page found [257281.239614] sd 8:0:0:0: [sda] Assuming drive cache: write through [257281.332997] sda: sda1 [257281.337533] sd 8:0:0:0: [sda] Attached SCSI disk [257294.945908] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [257294.968370] EXT4-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended [257295.093292] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [257318.338870] usb 1-1.4.2: USB disconnect, device number 104 [257318.503814] usb 1-1.4-port4: disabled by hub (EMI?), re-enabling... [257318.510680] usb 1-1.4.4: USB disconnect, device number 105 [257318.783617] usb 1-1.4.4: new full-speed USB device number 106 using musb-hdrc [257318.903723] usb 1-1.4.4: not running at top speed; connect to a high speed hub [257318.904394] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [257318.904414] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [257318.904428] usb 1-1.4.4: Product: Arduino Due [257318.904442] usb 1-1.4.4: Manufacturer: Arduino LLC [257318.905856] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [257318.924965] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [257318.932375] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.003B/input/input59 [257318.935503] hid-generic 0003:2341:003E.003B: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [261545.728875] usb 1-1.4.4: USB disconnect, device number 106 [467222.442656] CAUTION: musb: Babble Interrupt Occurred [467222.532830] usb 1-1: USB disconnect, device number 89 [467222.532872] usb 1-1.4: USB disconnect, device number 90 [467222.542756] musb-hdrc musb-hdrc.1.auto: Restarting MUSB to recover from Babble [467222.544826] musb-hdrc: setup fifo_mode 4 [467222.544877] musb-hdrc: 28/31 max ep, 16384/16384 memory [467222.942736] usb 1-1: new full-speed USB device number 107 using musb-hdrc [467223.083906] usb 1-1: New USB device found, idVendor=0e8f, idProduct=0016 [467223.083948] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [467223.083976] usb 1-1: Product: USB HUB 2.0 [467223.084002] usb 1-1: Manufacturer: GASIA Semi. [467223.090200] hub 1-1:1.0: USB hub found [467223.090484] hub 1-1:1.0: 4 ports detected [467223.382671] usb 1-1.4: new full-speed USB device number 108 using musb-hdrc [467223.503442] usb 1-1.4: New USB device found, idVendor=0e8f, idProduct=0016 [467223.503471] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [467223.503485] usb 1-1.4: Product: USB HUB 2.0 [467223.503499] usb 1-1.4: Manufacturer: GASIA Semi. [467223.507522] hub 1-1.4:1.0: USB hub found [467223.507719] hub 1-1.4:1.0: 4 ports detected [467223.802711] usb 1-1.4.4: new full-speed USB device number 109 using musb-hdrc [467223.922878] usb 1-1.4.4: not running at top speed; connect to a high speed hub [467223.923704] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [467223.923739] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [467223.923767] usb 1-1.4.4: Product: Arduino Due [467223.923792] usb 1-1.4.4: Manufacturer: Arduino LLC [467223.926191] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [467223.960489] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [467223.975664] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.003C/input/input60 [467223.979388] hid-generic 0003:2341:003E.003C: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [467816.834001] usb 1-1.4.4: USB disconnect, device number 109 [658566.322025] CAUTION: musb: Babble Interrupt Occurred [658566.412200] usb 1-1: USB disconnect, device number 107 [658566.412246] usb 1-1.4: USB disconnect, device number 108 [658566.422024] musb-hdrc musb-hdrc.1.auto: Restarting MUSB to recover from Babble [658566.424096] musb-hdrc: setup fifo_mode 4 [658566.424146] musb-hdrc: 28/31 max ep, 16384/16384 memory [658566.821924] usb 1-1: new full-speed USB device number 110 using musb-hdrc [658566.963148] usb 1-1: New USB device found, idVendor=0e8f, idProduct=0016 [658566.963196] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [658566.963224] usb 1-1: Product: USB HUB 2.0 [658566.963250] usb 1-1: Manufacturer: GASIA Semi. [658566.973271] hub 1-1:1.0: USB hub found [658566.973521] hub 1-1:1.0: 4 ports detected [658567.271881] usb 1-1.4: new full-speed USB device number 111 using musb-hdrc [658567.393877] usb 1-1.4: New USB device found, idVendor=0e8f, idProduct=0016 [658567.393926] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [658567.393954] usb 1-1.4: Product: USB HUB 2.0 [658567.393979] usb 1-1.4: Manufacturer: GASIA Semi. [658567.400818] hub 1-1.4:1.0: USB hub found [658567.405791] hub 1-1.4:1.0: 4 ports detected [658567.701925] usb 1-1.4.4: new full-speed USB device number 112 using musb-hdrc [658567.822009] usb 1-1.4.4: not running at top speed; connect to a high speed hub [658567.822649] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [658567.822667] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [658567.822681] usb 1-1.4.4: Product: Arduino Due [658567.822694] usb 1-1.4.4: Manufacturer: Arduino LLC [658567.824119] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [658567.838902] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [658567.846740] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.003D/input/input61 [658567.848880] hid-generic 0003:2341:003E.003D: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [660556.102676] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [660556.375473] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [660561.957538] usb 1-1.4.4: USB disconnect, device number 112 [660561.959344] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [660562.252041] usb 1-1.4.4: new full-speed USB device number 113 using musb-hdrc [660562.372222] usb 1-1.4.4: not running at top speed; connect to a high speed hub [660562.372835] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [660562.372850] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [660562.372859] usb 1-1.4.4: Product: Arduino Due [660562.372867] usb 1-1.4.4: Manufacturer: Arduino LLC [660562.375929] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [660562.403103] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [660562.414465] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.003E/input/input62 [660562.416101] hid-generic 0003:2341:003E.003E: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [661684.292007] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [661684.565338] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [661690.077550] usb 1-1.4.4: USB disconnect, device number 113 [661690.079517] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [661690.372087] usb 1-1.4.4: new full-speed USB device number 114 using musb-hdrc [661690.492234] usb 1-1.4.4: not running at top speed; connect to a high speed hub [661690.493033] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [661690.493054] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [661690.493069] usb 1-1.4.4: Product: Arduino Due [661690.493082] usb 1-1.4.4: Manufacturer: Arduino LLC [661690.497345] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [661690.522653] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [661690.540649] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.003F/input/input63 [661690.543045] hid-generic 0003:2341:003E.003F: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [662811.262897] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [662811.536065] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [662815.263362] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [662815.536059] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [662815.810039] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [662816.083332] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [662816.356895] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [662816.631469] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [662816.904354] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [662816.943138] CAUTION: musb: Babble Interrupt Occurred [662816.943583] usb 1-1: USB disconnect, device number 110 [662816.943620] usb 1-1.4: USB disconnect, device number 111 [662816.943648] usb 1-1.4.4: USB disconnect, device number 114 [662816.944329] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [662817.042017] musb-hdrc musb-hdrc.1.auto: Restarting MUSB to recover from Babble [662817.044120] musb-hdrc: setup fifo_mode 4 [662817.044173] musb-hdrc: 28/31 max ep, 16384/16384 memory [662817.441953] usb 1-1: new full-speed USB device number 115 using musb-hdrc [662817.582955] usb 1-1: New USB device found, idVendor=0e8f, idProduct=0016 [662817.582975] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [662817.582985] usb 1-1: Product: USB HUB 2.0 [662817.582993] usb 1-1: Manufacturer: GASIA Semi. [662817.585626] hub 1-1:1.0: USB hub found [662817.585968] hub 1-1:1.0: 4 ports detected [662817.882009] usb 1-1.4: new full-speed USB device number 116 using musb-hdrc [662818.002666] usb 1-1.4: New USB device found, idVendor=0e8f, idProduct=0016 [662818.002686] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [662818.002695] usb 1-1.4: Product: USB HUB 2.0 [662818.002704] usb 1-1.4: Manufacturer: GASIA Semi. [662818.005521] hub 1-1.4:1.0: USB hub found [662818.005864] hub 1-1.4:1.0: 4 ports detected [662818.301985] usb 1-1.4.4: new full-speed USB device number 117 using musb-hdrc [662818.422178] usb 1-1.4.4: not running at top speed; connect to a high speed hub [662818.422823] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [662818.422837] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [662818.422846] usb 1-1.4.4: Product: Arduino Due [662818.422855] usb 1-1.4.4: Manufacturer: Arduino LLC [662818.427372] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [662818.452525] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [662818.463021] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0040/input/input64 [662818.464584] hid-generic 0003:2341:003E.0040: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [663942.794300] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [663943.067320] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [663948.618193] usb 1-1.4.4: USB disconnect, device number 117 [663948.618903] cdc_acm 1-1.4.4:1.0: failed to set dtr/rts [663948.902011] usb 1-1.4.4: new full-speed USB device number 118 using musb-hdrc [663949.022122] usb 1-1.4.4: not running at top speed; connect to a high speed hub [663949.022764] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [663949.022777] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [663949.022786] usb 1-1.4.4: Product: Arduino Due [663949.022794] usb 1-1.4.4: Manufacturer: Arduino LLC [663949.025827] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [663949.047703] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [663949.057628] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0041/input/input65 [663949.059265] hid-generic 0003:2341:003E.0041: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [664136.643202] usb 1-1-port4: disabled by hub (EMI?), re-enabling... [664136.649899] usb 1-1.4: USB disconnect, device number 116 [664136.650004] usb 1-1.4.4: USB disconnect, device number 118 [664136.921903] usb 1-1.4: new full-speed USB device number 119 using musb-hdrc [664137.043180] usb 1-1.4: New USB device found, idVendor=0e8f, idProduct=0016 [664137.043229] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [664137.043257] usb 1-1.4: Product: USB HUB 2.0 [664137.043282] usb 1-1.4: Manufacturer: GASIA Semi. [664137.053240] hub 1-1.4:1.0: USB hub found [664137.053578] hub 1-1.4:1.0: 4 ports detected [664137.352099] usb 1-1.4.4: new full-speed USB device number 120 using musb-hdrc [664137.472022] usb 1-1.4.4: not running at top speed; connect to a high speed hub [664137.472604] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [664137.472623] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [664137.472655] usb 1-1.4.4: Product: Arduino Due [664137.472669] usb 1-1.4.4: Manufacturer: Arduino LLC [664137.474088] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [664137.489296] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [664137.497273] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0042/input/input66 [664137.499449] hid-generic 0003:2341:003E.0042: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [664138.271998] usb 1-1.4.2: new full-speed USB device number 121 using musb-hdrc [664138.392685] usb 1-1.4.2: not running at top speed; connect to a high speed hub [664138.395416] usb 1-1.4.2: New USB device found, idVendor=05dc, idProduct=a400 [664138.395453] usb 1-1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [664138.395480] usb 1-1.4.2: Product: JUMPDRIVE SECURE [664138.395506] usb 1-1.4.2: Manufacturer: LEXAR MEDIA [664138.395532] usb 1-1.4.2: SerialNumber: 106A6604221918121104 [664138.402924] usb-storage 1-1.4.2:1.0: USB Mass Storage device detected [664138.405976] scsi host9: usb-storage 1-1.4.2:1.0 [664138.408370] usb 1-1.4.4: USB disconnect, device number 120 [664138.671948] usb 1-1.4.4: new full-speed USB device number 122 using musb-hdrc [664138.792020] usb 1-1.4.4: not running at top speed; connect to a high speed hub [664138.792604] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [664138.792623] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [664138.792637] usb 1-1.4.4: Product: Arduino Due [664138.792651] usb 1-1.4.4: Manufacturer: Arduino LLC [664138.794567] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [664138.809481] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [664138.817381] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0043/input/input67 [664138.819499] hid-generic 0003:2341:003E.0043: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [664139.403239] scsi 9:0:0:0: Direct-Access LEXAR JUMPDRIVE SECURE 1000 PQ: 0 ANSI: 0 CCS [664139.407739] sd 9:0:0:0: Attached scsi generic sg0 type 0 [664139.409733] sd 9:0:0:0: [sda] 2030592 512-byte logical blocks: (1.03 GB/991 MiB) [664139.410862] sd 9:0:0:0: [sda] Write Protect is off [664139.410888] sd 9:0:0:0: [sda] Mode Sense: 43 00 00 00 [664139.412040] sd 9:0:0:0: [sda] No Caching mode page found [664139.417774] sd 9:0:0:0: [sda] Assuming drive cache: write through [664139.502236] sda: sda1 [664139.506571] sd 9:0:0:0: [sda] Attached SCSI disk [664147.473114] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [664147.496253] EXT4-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended [664147.621580] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [664176.013250] usb 1-1.4.2: USB disconnect, device number 121 [664176.182183] usb 1-1.4-port4: disabled by hub (EMI?), re-enabling... [664176.189031] usb 1-1.4.4: USB disconnect, device number 122 [664176.461901] usb 1-1.4.4: new full-speed USB device number 123 using musb-hdrc [664176.582139] usb 1-1.4.4: not running at top speed; connect to a high speed hub [664176.582960] usb 1-1.4.4: New USB device found, idVendor=2341, idProduct=003e [664176.582995] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [664176.583022] usb 1-1.4.4: Product: Arduino Due [664176.583048] usb 1-1.4.4: Manufacturer: Arduino LLC [664176.589237] cdc_acm 1-1.4.4:1.0: This device cannot do calls on its own. It is not a modem. [664176.605762] cdc_acm 1-1.4.4:1.0: ttyACM0: USB ACM device [664176.619481] input: Arduino LLC Arduino Due as /devices/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.2/0003:2341:003E.0044/input/input68 [664176.624571] hid-generic 0003:2341:003E.0044: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Due] on usb-musb-hdrc.1.auto-1.4.4/input2 [664815.298176] usb 1-1.4.4: USB disconnect, device number 123