SRS Module - check for I2C Bus Errors

RobertK66 / obc_1769_core

Implements hardware abstractions and Layer2(3) modules for usage of the OBC hardware in cubesat projects

GNU General Public License v3.0

1 stars 1 forks source link

SRS Module - check for I2C Bus Errors #87

Closed RobertK66 closed 9 months ago

RobertK66 commented 9 months ago

When no slave is connected (ether 0x47 for Power On/off command or 0x0B for commands,) then the software triggers same events as when slave has answered! So the random content of memory on TX buffer is treated as normal answer

check the i2c Job for BUS Error and do not trigger normal events in this case!