Error temp measure - Githubissues

RobertLorincz / Orbiter-Toolboards

Creative Commons Zero v1.0 Universal

35 stars 1 forks source link

Error temp measure #14

Closed dimicel closed 2 weeks ago

dimicel commented 3 weeks ago

The thermistor I have installed was measuring the temperature correctly when connected to the board. With the OrbitertoolO2, and using the same configuration (replacing the pin with the tool's pin), it shows a very low temperature, around 3 degrees and a bit, when the ambient temperature is about 20 degrees.

RobertLorincz commented 2 weeks ago

Have you configured the correct pull up resistor?

dimicel commented 2 weeks ago

Ok, That was the problem. I had crossed that line. Thnaks