search

RobertoBenjami / stm32_graphics_display_drivers

STM32 LCD drivers (currently: spi(dma), gpio, fsmc(dma), st7735, st7783, ili9325, ili9328, ili9341, ili9486, ili9488, hx8347g)
537 stars 109 forks source link

SPFD5408/ILI932x #38

Closed freetoair closed 1 year ago

freetoair commented 1 year ago

Namely, in fsmc mode 8bit with the SPFD 5408 controller, I can't get a display on the screen, only a white screen, no image. This controller in the sequence to write the index register does not need to write the higher byte, only the low uint8_t byte, could it be a problem or the speed of the transaction?
To be precise, the controller in that lcd has ID = 2053, but it works fine with drivers for ILI932x. It is otherwise a very common LCD Arduino shield. Just one more observation that might help solve the problem: At the moment when he needs to write something in GRAM, the screen is completely white, but in between for a moment color noise appears. That's why I thought that the problem might be with the speed of writing in GRAM. regards, freetoair

RobertoBenjami commented 1 year ago

I don't have such an LCD. FSMC speed settings is possible in CubeMX or CubeIDE (clock cycles parameters).