Electronics mainboard images and plug locations for R2/C2 and R1+

[CobyKabili]

@mnacinopa we need a schematic of the electronics boards for when customers are replacing and plugging in. Something like the 3 examples below, but we need it for both the all 3 of our printers

http://reprap.org/mediawiki/images/thumb/6/6d/Rampswire14.svg/500px-Rampswire14.svg.png

http://www.hobbyist.co.nz/sites/default/files/ramps/schematic.png

http://www.achatzmediaserver.com/support/wp-content/uploads/2015/11/ramps-14-instructions-connections-3d-printer.png

[mnacinopa]

@AllenMcAfee We want to do something like what Coby linked to above.

[mnacinopa]

@CobyKabili R2/C2 Mainboard Schematic

[mnacinopa]

@CobyKabili
Here's the first draft of it. I asked @peries to try to see if she could clean it up a bit.

The C2 one would obviously just be this without the heatbed connections

[mnacinopa]

Doubled the thickness of the wiring to make it easier to see R2

C2

[CobyKabili]

@mnacinopa these are great. One question, is there a reason the board is upside down?

[AllenMcAfee]

@mnacinopa the "B" is flipped in this version as well. Who the hell is ropo?

[mnacinopa]

@CobyKabili Not really. I made the board first then made the logo after and didnt think about it.

@AllenMcAfee Some new printer company thats trying to steal our logo.

Wiring Edits Peri made. Changed ropo to robo, for copyright reasons.

C2

R2

[CobyKabili]

@mnacinopa we need an R1+ diagram as well. Our ramps boards are a little different than the stock off the shelf ones

[mnacinopa]

[CobyKabili]

looks good. Put it in an article and I can update a macro for it.

[mnacinopa]

@CobyKabili R1+ RAMPS Board Wiring Diagram Posted in the wrong issue. Lols

[CobyKabili]

Perfect. Thank you.