Closed NonTaxx closed 2 months ago
Looks like a different version of 2.1.6 = https://github.com/RoboDurden/Hoverboard-Firmware-Hack-Gen2.x/tree/main/target_1%3DGD32F130/v6%3D2.5 which is v1.1 Maybe yours is v1.0. Look on the pcb.
Watch my autodetect videos and post the pin definitions here when you have succeeded.
I don't know where to connect the STLink
either you are one of the bdc or you didnt read the wiki
Please verify gnd and 3.3V with a multimeter !
gnd and 3v3 is correct
When I try to connect it beeps and I get an error message
Should I upgrade the firmware?
Sorry, no time (=happiness) to help you with this beginner steps. Watch youtube and try autoflash.bat: https://github.com/RoboDurden/Hoverboard-Firmware-Hack-Gen2.x/tree/main/BinariesReadyToFlash
it could be everything really if you ask me ill tell you to use serial flashing because itll 100% work
I succesfully connected it but I don't know which .bin should I flash in
I'm green on this stuff, I want it to be a remote controlled hoverboard so I could use it to control my lawn mower. I did my research and found on youtube that I need to flash custom firmware therefore I can connect it to my RC receiver.
autodetect
Which one should I flash in? There are a bunch of versions
please start using your brain !
Well you told it is 2.1.6 but there is no 2.1.6 .bin file in all of the repository
i told you to use autodetect,there is 4 option left,you know your mcu number so 2 left,i dont know which one to use either because the picture quality is shit no one can trace it,but 50% chance anyone would just try and see if it works
you are the type of person that dont deserve to use the firmware
Well everyone is free to use my firmware. And no one at all deserves my help. Because we all should be free :-)
yes just the usual f130c8 but without gate driver