Closed DRCRecoveryData closed 11 months ago
RoganDawes
commented
12 months ago Not 100% sure what your point is. You mention flashing the 52840 dongle, but the bulk of your post is about flashing a 24lu1 dongle instead. Does that get a Logitech firmware to act as a receiver? Were there any changes required to get the LOGITACKER firmware working on the 52840 dongle?
DRCRecoveryData
commented
11 months ago Hi,
It's working
Get Outlook for iOShttps://aka.ms/o0ukef
From: RoganDawes @.> Sent: Friday, July 7, 2023 2:28:55 AM To: RoganDawes/LOGITacker @.> Cc: Nguyen Vu Ha @.>; Author @.> Subject: Re: [RoganDawes/LOGITacker] Adding support NRF52840 (Issue #65)
Not 100% sure what your point is. You mention flashing the 52840 dongle, but the bulk of your post is about flashing a 24lu1 dongle instead. Does that get a Logitech firmware to act as a receiver? Were there any changes required to get the LOGITACKER firmware working on the 52840 dongle?
— Reply to this email directly, view it on GitHubhttps://github.com/RoganDawes/LOGITacker/issues/65#issuecomment-1624204166, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AUKDPPB7FG33XXI5DZA3DK3XO4GXPANCNFSM6AAAAAA2ARUQSY. You are receiving this because you authored the thread.Message ID: @.***>
Hi,
I have update cheap dongle support logitacker firmware
NRF52840 RF Module E104-BT5040U 2.4GHz PCB BLE5.0 BLE 4.2 Onboard Antenna USB Interface High-Performance Secondary Development
https://a.aliexpress.com/_mtMbCz
Flash over SPI using a Raspberry PI 4
To flash the nRF24LU1+ using a Raspberry PI 4, you can connect the following pins:
https://github.com/ShigemoriHakura/nRF24LU1P_SPI_Flashing
https://github.com/ahtn/nrf24lu1p-512-bootloader
update bootloader.hex in option 0 of https://github.com/ShigemoriHakura/nRF24LU1P_SPI_Flashing
and upload full image dongle.bin in option 1 from:
https://github.com/RoganDawes/nrf-research-firmware
NRF24lU1P
NRF52840