Matrix Voice 1 panic'ed (IntegerDivideByZero)

[jlaba]

Following the Readme I uploaded the firmware to my matrix voice. Connected with minicom to /dev/ttyS0 it shows a reboot loop with the following output:

`LF file SHA256: 0000000000000000

Rebooting... I (10) boot: ESP-IDF v3.1 2nd stage bootloader I (10) boot: compile time 11:08:24 I (10) boot: Enabling RNG early entropy source... I (14) boot: SPI Speed : 40MHz I (18) boot: SPI Mode : DIO I (22) boot: SPI Flash Size : 4MB I (26) boot: Partition Table: I (29) boot: ## Label Usage Type ST Offset Length I (37) boot: 0 nvs WiFi data 01 02 00009000 00005000 I (44) boot: 1 otadata OTA data 01 00 0000e000 00002000 I (52) boot: 2 app0 OTA app 00 10 00010000 001e0000 I (59) boot: 3 app1 OTA app 00 11 001f0000 001e0000 I (67) boot: 4 eeprom Unknown data 01 99 003f0000 00001000 I (74) boot: 5 spiffs Unknown data 01 82 003f1000 0000f000 I (82) boot: End of partition table I (86) esp_image: segment 0: paddr=0x00010020 vaddr=0x3f400020 size=0x38800 (231424) map I (176) esp_image: segment 1: paddr=0x00048828 vaddr=0x3ffbdb60 size=0x05a58 ( 23128) load I (185) esp_image: segment 2: paddr=0x0004e288 vaddr=0x40080000 size=0x01d90 ( 7568) load I (188) esp_image: segment 3: paddr=0x00050020 vaddr=0x400d0020 size=0xce040 (843840) map I (489) esp_image: segment 4: paddr=0x0011e068 vaddr=0x40081d90 size=0x13234 ( 78388) load I (522) esp_image: segment 5: paddr=0x001312a4 vaddr=0x50000200 size=0x00010 ( 16) load I (535) boot: Loaded app from partition at offset 0x10000 I (535) boot: Disabling RNG early entropy source... Booting Matrix Voice Initialized Guru Meditation Error: Core 1 panic'ed (IntegerDivideByZero). Exception was unhandled.

Core 1 register dump: PC : 0x400dac29 PS : 0x00060330 A0 : 0x800dac94 A1 : 0x3ffb26b0
A2 : 0x3ffbb9e4 A3 : 0x3ffbb9e4 A4 : 0x00000000 A5 : 0xffffffbf
A6 : 0xffffffdf A7 : 0x3ffb9374 A8 : 0x00000000 A9 : 0x00000000
A10 : 0x00000000 A11 : 0x00000001 A12 : 0x3ffb26bc A13 : 0x00000004
A14 : 0x00000000 A15 : 0x00000000 SAR : 0x00000018 EXCCAUSE: 0x00000006
EXCVADDR: 0x00000000 LBEG : 0x40089ee9 LEND : 0x40089f0b LCOUNT : 0xffffffff

Backtrace:0x400dac26:0x3ffb26b00x400dac91:0x3ffb26e0 0x400d305f:0x3ffb2760 0x400d8062:0x3ffb27a0 0x400ef56e:0x3ffb2820`

This is my settings.ini: `[General] hostname=192.168.2.195 deployhost=192.168.2.103 siteId=satellite ;supported: M5ATOMECHO=0, MATRIXVOICE=1, AUDIOKIT=2, INMP441=3, INMP441MAX98357A=4, ESP32_POE_ISO=5, TAUDIO=6, INMP441MAX98357AFASTLED=7 device_type=1 ;network_type: 0: WiFi, 1: Ethernet network_type=0

[Wifi] ssid=MY_SSID ;ssid=MY_PASSWORD password=MY_PW ;scanStrongestAP=true ; use if device connects to a non-optimal AP

;uncomment next 4 lines and fill with your own values if you want to use a static ip address ;ip=192.168.xxx.xxx ;gateway=192.168.xxx.xxx ;subnet=255.255.255.0 ;dns1=192.168.xxx.xxx ;optional: second dns server ;dns2=192.168.xxx.xxx

[OTA] ;supported: upload, ota, matrix ;-upload: device should be attached to computer via usb ;-ota: will use espota ;-matrix: matrix voice should be attached to a raspberry pi with matrix software. ; deployhost should be set to ip of the pi method=ota password=DiesPfO!2022 port=3232

[MQTT] hostname=MY_IP port=1883 username=MY_USERNAME password=MY_PASSWORD`

To setup the environment on the PI I have used this repo https://github.com/qnlbnsl/Matrix-IO since the matrix.io repos are offline. (See separate issue to add a hint to your Readme file for that).

[Romkabouter]

Is the hostname in the MQTT section your IP or the value MY_IP? Don't know if that is the issue by the way. And maybe edit you passwords out ;)

[jlaba]

Good tip :-) (passwords)

The hostnae is my mqtt ip address.