RotBotSlicer
commented
8 months ago Hi
I always use Simplify3D to view Gcodes. There are also online Gcode viewers. Have you tried them?
Regards
Michael
––––––––––––––––––––––––––––––––––––––––––––––––––– ZHAW Zurich University of Applied Sciences SoE School of Engineering IMS Institute of Mechatronic Systems
Michael Wüthrich
Senior lecturer Product Development for Mechatronical Systems Head of Systems and Biomedical Engineering Head of Rapid Prototyping Lab
Institut für Mechatronische Systeme Technikumstrasse 5 Postfach 8401 Winterthur
Phone +41 58 934 78 25 @.*** www.zhaw.ch/ims, www.zhaw.ch/engineering
Am 20.01.2024 um 20:35 schrieb Andy McCall @.***>:
Describe the bug Have downloaded the script and I am able to load the transformed STL files into prusaslicer. I then run the backtransformation script and that script exits successfully. However, I am unable to open the converted GCODE in a GCODE viewer. Can provide the relevant STL files if necessary.
Have also tried using the CNC kitchen guidehttps://www.cnckitchen.com/blog/guide-how-to-use-conical-slicing and followed all the steps regarding resetting the print origin and adding the dummy plate below the part. Still the same error
To Reproduce Steps to reproduce the behavior:
- Transform STL file using script
- Slice the file using prusaslicer
- Backtransformed the sliced GCODE
- Open the backtransformed GCODE in a gcode viewer.
- see an error
Expected behavior Can open the backtransformed GCODE in a gcode viewer
Screenshots Screenshot.from.2024-01-20.11-28-05.png (view on web)https://github.com/RotBotSlicer/Transform/assets/8611053/6a17eb7b-f475-464d-9551-4d91697c8c7a
— Reply to this email directly, view it on GitHubhttps://github.com/RotBotSlicer/Transform/issues/14, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AVICMYP5HQ7UMY66ABYKHCDYPQMBRAVCNFSM6AAAAABCDMZYH6VHI2DSMVQWIX3LMV43ASLTON2WKOZSGA4TEMRRGUZTCNY. You are receiving this because you are subscribed to this thread.Message ID: @.***>
Y13Lab
Describe the bug Have downloaded the script and I am able to load the transformed STL files into prusaslicer. I then run the backtransformation script and that script exits successfully. However, I am unable to open the converted GCODE in a GCODE viewer. Can provide the relevant STL files if necessary.
Have also tried using the CNC kitchen guide and followed all the steps regarding resetting the print origin and adding the dummy plate below the part. Still the same error
To Reproduce Steps to reproduce the behavior:
Expected behavior Can open the backtransformed GCODE in a gcode viewer
Screenshots