Laser Engraving/Cutting settings

[Meatstake]

I think, the laser engraving expierence could be augmented with further features:

• Greyscaling not only with the filling pattern, but also with "Laser Power" and/or "Burn Time" , at least as an option. This also would alow direct "dot to pixel" pattern for engraving in "grayscale" and the engraved images would not look like a labyrinth-like offset print from an old newspaper, as we have it right now.
• B&W engraving without interlase (actual lineal mode), or also with "dot method" as on other Laser Engravers.
• B&W engraving without string/interlacing/breaks also for non SVG Files. Just like Rotrics does it right now with a pen in "wrighting mode".
• Layers support with dedicated setting for each layer in the App to engrave and cut the engraved out and so on.

[Master-68]

Yes, please!

[Master-68]

Another thing: When selecting multi-pass laser, the z value it lowers the arm cannot be set to less than 1 mm. This restriction should be removed.

[MichaelDu9226]

Another thing: When selecting multi-pass laser, the z value it lowers the arm cannot be set to less than 1 mm. This restriction should be removed. Restriction has been removed.