search

RoyBerntsenDesign / V-Baby-CoreXY

CoreXY 3d Printer from Roy Berntsen
https://vkingprinter.com/
Other
104 stars 25 forks source link

Incorrectly named parts in the fusion360 model #7

Open ep1cman opened 3 years ago

ep1cman commented 3 years ago

Some of the frame extrusions and the brearing shafts have incorrect lengths in their part names. E.g the 35mm bearing shafts are named 5x30 Bearing Shaft. I now have 30 30mm shafts that i can't use.

I would suggest for parts like those to not include the dimensions in the file names if they are subject to change. I guess this wont work for screws but those shouldn't be an issue if they are all modeled correctly.

RoyBerntsenDesign commented 3 years ago

Thank you for letting me know about this. You should be able to use the 30 one. The 35 extends out of what they need to.

man. 17. mai 2021, 19:57 skrev Sebastian Goscik @.***>:

Some of the frame extrusions and the brearing shafts have incorrect lengths in their part names. E.g the 35mm bearing shafts are named 5x30 Bearing Shaft. I now have 30 30mm shafts that i can't use.

I would suggest for parts like those to not include the dimensions in the file names if they are subject to change. I guess this wont work for screws but those shouldn't be an issue if they are all modeled correctly.

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/RoyBerntsenDesign/V-Baby-CoreXY/issues/7, or unsubscribe https://github.com/notifications/unsubscribe-auth/AHZXZMMJ65UI3K3HU3CNGWTTOFKI5ANCNFSM45A5Y2XQ .