Closed chaosbuzz closed 3 years ago
Thanks for this, I started making a PR for this: https://github.com/Ryzee119/ogx360/pull/29
If you know how to git checkout this PR/compile the code you're welcome to try it out. I wont be able to test for a few days which id rather do before a new release
Cheers Ryan
I'm in no rush and don't want to muck it up with my lack of knowledge on the issue, thank you so much for your help!
On Thu, Jul 2, 2020, 8:26 PM Ryzee119 notifications@github.com wrote:
Thanks for this, I started making a PR for this:
29 https://github.com/Ryzee119/ogx360/pull/29
If you know how to git checkout this PR/compile the code you're welcome to try it out. I wont be able to test for a few days which id rather do before a new release
Cheers Ryan
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/Ryzee119/ogx360/issues/28#issuecomment-653271119, or unsubscribe https://github.com/notifications/unsubscribe-auth/AQFAHMXE65OMJWFV3KRZC5LRZUQR5ANCNFSM4OPKCM5Q .
I finally was able to compile the firmware and flash the board which I think I did correctly because the komani xbox 360 dance pad now is recognized and works with OG Xbox! The Mad Catz/precision dance pad one doesn't though, none of the buttons on the pad seem to work. The precision dance pad connects through the madcatz via a handmade ethernet. It works fine on XBOX 360, but doesn't seem to be working here. I am attaching a photo of what the setup looks like. The madcatz controller ring appropriately lights up for controller one but doesn't do anything. You can see the dance pad here: http://www.precisiondancepads.com/en/dance-pads/8-omega-gx.html
Question I have is, if the other komami pad now works, does that mean I compiled the firmware correctly where both should work? Anything I can try to help make it work? The precision dance pad is my main DDR platform, so more than anything, hoping to get that to work! Appreciate your help!
Im not too sure why it wouldnt be working, except that it is not a standard xpad device. (Most of these peripherals behave just like Xbox360 controllers)
You could try these binaries: https://github.com/Ryzee119/ogx360/actions/runs/220470157
Thanks, I'll check it out
On Sun, Aug 23, 2020, 7:15 PM Ryzee119 notifications@github.com wrote:
Im not too sure why it wouldnt be working, except that it is not a standard xpad device. (Most of these peripherals behave just like Xbox360 controllers)
You could try these binaries: https://github.com/Ryzee119/ogx360/actions/runs/220470157
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/Ryzee119/ogx360/issues/28#issuecomment-678837510, or unsubscribe https://github.com/notifications/unsubscribe-auth/AQFAHMQ4ROXKPX4PFLEEZ33SCGPHVANCNFSM4OPKCM5Q .
Will close due to inactivity. Please try latest firmware and if these still dont work, please open a new issue :)
Just received the OGX360 and love it so far, was primarily planning on using it to play Ultramix with my Precision Dance Pad Omega 4x (which uses a MadCatz beatpad as it's controller) and Konami official dance pads. Neither seem to work however. I am including the full USB descriptors below, hope to see it in the next firmware version and thank you for your amazing work Ryzee!
[DescriptorDump_MadCatz_Beat_Pad.txt](https://github.com/Ryzee119/ogx360/files/4867021/DescriptorDump_MadCatz_Beat_Pad.txt
DescriptorDump_Konami_Dance_Pad.txt )