search

SANdood / Green-Smart-HW-Recirculator

SmartThings automated HW recirculator
3 stars 5 forks source link

Using motion sensors with temp sensors #3

Open briandmiller opened 6 years ago

briandmiller commented 6 years ago

Can I use a motion sensor to turn pump on and then temp sensor to turn pump off so that pump only runs when motion sensor/s are active and temp is below a setpoint?

SANdood commented 6 years ago

Yes, you can select that the Thermometer is used to Turn Off the switch when the temperature is reached, but not to turn it on.

Likewise, you can set it to turn on when motion is detected, but not to turn it off when the motion stops.

From: briandmiller notifications@github.com Sent: Wednesday, May 23, 2018 5:35 AM To: SANdood/Green-Smart-HW-Recirculator Green-Smart-HW-Recirculator@noreply.github.com Cc: Subscribed subscribed@noreply.github.com Subject: [SANdood/Green-Smart-HW-Recirculator] Using motion sensors with temp sensors (#3)

Can I use a motion sensor to turn pump on and then temp sensor to turn pump off so that pump only runs when motion sensor/s are active and temp is below a setpoint?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/SANdood/Green-Smart-HW-Recirculator/issues/3 , or mute the thread https://github.com/notifications/unsubscribe-auth/AHpYUGUAJoIUz9-ptiQ29Nw3R2TkyB50ks5t1S07gaJpZM4UKGa5 . https://github.com/notifications/beacon/AHpYUMzlT6XGjhUS-h5fPSOk60rabBh8ks5t1S07gaJpZM4UKGa5.gif