Closed GoogleCodeExporter closed 9 years ago
Probably it is a problem caused by memory full. Try to use less RAM (the DEBUG
ON mode uses RAM, without it you should save same byte and Arduino won't
restart). If debug mode is necessary try to save memory in some other way.
Let me know.
Marco
Original comment by martines...@gmail.com
on 14 Feb 2012 at 1:15
May be problem in power supply?
Original comment by dmg...@gmail.com
on 18 Mar 2012 at 7:40
Yes it can be. It's very advised to use an additional power supply in addition
to the USB one.
Marco
Original comment by martines...@gmail.com
on 18 Mar 2012 at 1:25
GPRS mode need more power than SMS and CALL. Your power supply system must give
up to 2A current to the SIM module! In addition, place a capacitor at least of
1000uF*10V (or more) near with the SIM module.
Original comment by dmg...@gmail.com
on 18 Mar 2012 at 2:59
Original comment by martines...@gmail.com
on 23 Apr 2012 at 6:05
This issue section is not longer supported.
Please check the support page www.gsmlib.org
Original comment by martines...@gmail.com
on 6 Jul 2013 at 11:27
Original issue reported on code.google.com by
sjk...@gmail.com
on 11 Feb 2012 at 8:14