search

SCToolsfactory / SCJMapper-V2

SC Joystick Mapper (.Net 4; using sharpDX wrapper)
Other
137 stars 30 forks source link

Reverse Detection #58

Open RElapse788 opened 7 years ago

RElapse788 commented 7 years ago

I am not a programmer...AT ALL, so please bear with me:)

scjmapper sees the throttle as js2 and stick as js1, which causes the throttle to steer and the stick to control throttle. if I relabel them to match the throttle and stick work as intended but all the buttons are backward. what am I missing? also is there a better place to ask questions because I have no idea what I am doing.

thanks

bm98 commented 7 years ago

First you have to assign the js Number which is used in the game.

To do this you would use ‘Dump Log - ->’ there you see something like:

IBM enhanced (101/102-key) keyboard and 16+ button mouse installed

Where one is your throttle and the other the stick. Pretending the Saitek X65F is the throttle (which it really is in my case…)

The list contains joystick0 and joystick1 however in the game this is treated as js1 and js2 (i.e. add one to the number) in the Log

So you need to assign js1 to the X65F and js2 to the X-55 Rhino Stick. (you do this in the “Js Reassign…” window)

The tab “Joystick 1” should show: This device is listed as: js1 and the same for Tab “Joystick 2” which then is listed as js2

Now you are setup properly because you have to match the mapper with what the game sees nothing else works.

From there you should find your buttons properly if pressed. BTW I don’t know what buttons are backward really means …

Try this as a starter and see how it behaves. If you think it is wrong try to explain like: If I press button3 then ….. happens but I would expect it to be …….

Regs

From: RElapse788 [mailto:notifications@github.com] Sent: Wednesday, June 07, 2017 11:42 PM To: SCToolsfactory/SCJMapper-V2 SCJMapper-V2@noreply.github.com Cc: Subscribed subscribed@noreply.github.com Subject: [SCToolsfactory/SCJMapper-V2] Reverse Detection (#58)

I am not a programmer...AT ALL, so please bear with me:)

scjmapper sees the throttle as js2 and stick as js1, which causes the throttle to steer and the stick to control throttle. if I relabel them to match the throttle and stick work as intended but all the buttons are backward. what am I missing? also is there a better place to ask questions because I have no idea what I am doing.

thanks

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/SCToolsfactory/SCJMapper-V2/issues/58 , or mute the thread https://github.com/notifications/unsubscribe-auth/AHlmJzV9wbec_dNJTXM_lZAnOeHEmfbRks5sBxkNgaJpZM4NzUg2 .