Open ZakariyaCOLD opened 4 months ago
What you said is correct. Since you bought your model recently, you should normally be getting a v2 model.
v2 models only need to install 2._M600_Driver_V1.1.zip
and it's done.
Afaik, both the attack shark and kysona software are inherently the same. The brand name is the only difference.
@SLAzurin I bought X3 too almost at the same time as @ZakariyaCOLD . I checked its firmware according to your instructions and everything works fine so, it should be V2. It's been 2 days, I tested everything I can and everything works great. No any wireless issues at all. I tested the movement signals with MouseTester v1.5.3 app and it looks like working as stable as my wired razer DA v2.
Then, this morning I checked attackshark website, downloaded the app again and the app was different from the original app. I uninstalled the original and reinstalled the new one and I shock! They added new features including Motion Sync :D Tested motion sync with mouse tester app and it really works, works great actually. Not good as much as razer but it's very close.
SS of the new app:
Motion Sync disabled (wireless):
Motion Sync enabled (wireless):
Fast movement Frequency measurement (wireless):
Also there is a setting for sleep times but doesn't work properly. Light sleep setting only adds up to the default 1.5 minutes time. For example, 2m setting means 1.5m + 2m = 3.5m. There is no way to set it lower than 1.5m but it's fine. It could be worse like those expensive mice that sleeps just after 5 seconds and can't change it, totally unusable. Deep sleep doesn't even work at all for some reason. I haven't tested deep sleep before this new driver so I don't know if the problem is my mouse or the app. I set it to the lowest 1m time and after 12m I can still able to wake up my mouse without clicking any button. It's not a big deal, I always turn off my mouse when I don't use it for a long time.
@SLAzurin I bought X3 too almost at the same time as @ZakariyaCOLD . I checked its firmware according to your instructions and everything works fine so, it should be V2. It's been 2 days, I tested everything I can and everything works great. No any wireless issues at all. I tested the movement signals with MouseTester app and it looks like working as stable as my wired razer DA v2.
Then, this morning I checked attackshark website, downloaded the app again and the app was different from the original app. I uninstalled the original and reinstalled the new one and I shock! They added new features including Motion Sync :D Tested motion sync with mouse tester app and it really works, works great actually. Not good as much as razer but it's very close.
SS of the new app:
Motion Sync disabled (wireless):
Motion Sync enabled (wireless):
Fast movement Frequency measurement (wireless):
Also there is a setting for sleep times but doesn't work properly. Light sleep setting only adds up to the default 1.5 minutes time. For example, 2m setting means 1.5m + 2m = 3.5m. There is no way to set it lower than 1.5m but it's fine. It could be worse like those expensive mice that sleeps just after 5 seconds and can't change it, totally unusable. Deep sleep doesn't even work at all for some reason. I haven't tested deep sleep before this new driver so I don't know if the problem is my mouse or the app. I set it to the lowest 1m time and after 12m I can still able to wake up my mouse without clicking any button. It's not a big deal, I always turn off my mouse when I don't use it for a long time.
Hey there! Thanks for the informative comment! I'm currently rotating the usage between a few mice so I wasn't aware of this new software update. I still use my attack shark x3 and will definitely take a look at it and update this github's files and README. 🙂
I forgot to add the files. Here are the old and new driver apps: Attack_SharkX3Mouse V1.1.zip Attack_SharkX3Mouse V2.zip
I think the V2 firmware was made to add these new features but adapting the control pannel app took too long for some reason xd
Sorry for the delayed reply, I have already updated the software files in this github page. Thank you again
corrrect me if i'm wrong but let me samurize it : If I have the v2 I should be fine out of the box un less if it doesn't have the debounce time But if i have the v1 i have to upgrade it to v1.1 to fix sensor jitter (_M600_Upgrade_Tool.zip) and if i have the v1.1 with caps lock problem i would ONLY have to use (M600-20231013-_driver_for_receiver.zip) and after that use (M600_20231013-_driver_for_M600_Mouse.zip) that means if i don't have the annoying Caps lock problem i should be fine.
also if i have v1(after upgrading it to v1.1) /v1.1 or v2 without Debouncetime i should install the (_M600_Driver_V1.1.zip)
what software should i use the X3's software or the kysona m600? note that i'm getting the x3 not m600 (i bought the mouse but still didn't arrive so i'm still waiting :) )