Add Pinout Image of SRA board and sensors

[ombhilare999]

Something like this can be done for the boards and sensors:

Example 1:

Example 2:

[ombhilare999]

@dhairyashah1 assign this task to some second-year student.

[dhairyashah1]

@omsheladia i hope you can prepare the same. Get working on it.

[tiny-dentist]

update @dhairyashah1 @omsheladia ?

[dhairyashah1]

[ombhilare999]

The first Image needs improvements, too many arrows crossing each other. Check out this: https://hackaday.com/2021/08/03/tool-generates-interactive-pcb-diagrams-from-kicad/ Demo: https://blog.honzamrazek.cz/2021/06/making-nice-looking-and-interactive-diagrams-for-your-pcbs/

[gautam-dev-maker]

@omsheladia do you need more 6 months for this ?

[VedantParanjape]

@gautam-dev-maker remove inactive members from this project (@omsheladia )

[omsheladia]

The tool suggested by Omkar didn't seem to work on my system then, however if crossing of arrows is the only concern then I have found something else that can do the work, @gautam-dev-maker let me know if I can carry on with that.

[dhairyashah1]

What is that something else? Links / demos are desired @omsheladia

[VedantParanjape]

The tool suggested by Omkar didn't seem to work on my system then, however if crossing of arrows is the only concern then I have found something else that can do the work, @gautam-dev-maker let me know if I can carry on with that.

I never saw error logs or you trying to get that tool working.

[omsheladia]

@dhairyashah1 To prevent the crossing of arrows, we can insert an image in any flowchart maker and label them with more organised arrows compared to the ones that I used in Canva previously.

[omsheladia]

@VedantParanjape I talked about it personally to Omkar but we didn't reach towards any conclusion then.

[ombhilare999]

@omsheladia you sure about this? Didn't I tell you to explore the VM option?

[gautam-dev-maker]

@omsheladia I guess I have listed steps to run linux in parallels VM (during Walle) in macos. In fact I installed it in your system if I remember correctly.

[omsheladia]

@gautam-dev-maker the one you installed crashed during that time, had to install it more than thrice until i began to use the trial version. Anyways I have made some changes, let me know if it is good enough or if any formatting required.

[dhairyashah1]

@RajGupta17 @Greyless such pinouts are expected in the README.md's for SRA_Board_2023 and LSA, MPU respectively. Kindly incorporate these in your PRs for documentation.

[dhairyashah1]

Closing this as labelled pinout images are already incorporated