search

STMicroelectronics / STM32CubeF7

STM32Cube MCU Full Package for the STM32F7 series - (HAL + LL Drivers, CMSIS Core, CMSIS Device, MW libraries plus a set of Projects running on all boards provided by ST (Nucleo, Evaluation and Discovery Kits))
Other
320 stars 191 forks source link

Wrong information about boot address through option bytes #98

Closed KamilDuljas closed 9 months ago

KamilDuljas commented 11 months ago

In RM0410, for STM32F76xxx and and STM32F77 xxx boundary of SRAM2 is from 0x2007 C000 to 0x2007 FFFF. In description of Flash register, OPTCR1 in details we read: BOOT_ADD1[15:0]: Boot base address when Boot pin =1 BOOT_ADD1[15:0] correspond to address [29:14], The boot memory address can be programmed to any address in the range 0x0000 0000 to 0x2004 FFFF with a granularity of 16KB. Example: BOOT_ADD1 = 0x0000: Boot from ITCM RAM (0x0000 0000) BOOT_ADD1 = 0x0040: Boot from System memory bootloader (0x0010 0000) BOOT_ADD1 = 0x0080: Boot from Flash on ITCM interface (0x0020 0000) BOOT_ADD1 = 0x2000: Boot from Flash on AXIM interface (0x0800 0000) BOOT_ADD1 = 0x8000: Boot from DTCM RAM (0x2000 0000) BOOT_ADD1 = 0x8004: Boot from SRAM1 (0x2002 0000) BOOT_ADD1 = 0x8013: Boot from SRAM2 (0x2004 C000)

This description is wrong because address 0x2004 FFFF is boundary for SRAM2 on stm32f75 and 74 series. This description is copy/paste from RM0385. It should be "The boot memory address can be programmed to any address in the range 0x0000 0000 to 0x2007 FFFF with a granularity of 16KB."

RJMSTM commented 11 months ago

Hello @KamilDuljas,

Thank you for this report. We will get back to you as soon as we analyze it further. This may take some time. Thank you for your comprehension.

With regards,

TOUNSTM commented 11 months ago

ST Internal Reference: 158601

TOUNSTM commented 9 months ago

Hello @KamilDuljas,

Your request is being processed internally for update. So the correction will be available in the next publication of the reference manual RM0410. And since there are no patches in our software, please allow me to close this thread.

Thank you very much for your attention. We look forward to hearing from you.

With regards,