error status

[zxczxc322]

Hello, I would like to know why some accounts have an error status They are not removed or blocked for my region

[SagalVanderklok]

As I can see anastill's profile has been removed. Regarding nensya - does the problem persist constantly or the error occurs from time to time? Can you open nensya's profile page in the web browser tab?

[zxczxc322]

you're right, some accounts probably really removed I already monitoring another 200+ accounts and some 100% are not and still have an error. my friend also using this programm and he told just rerun tool should helps,but for me it doest work i think maybe domain name in pasted link matter?

[zxczxc322]

Now i checked those accs on second pc and they have no errors what could be the problem? i also checked accounts which blocked to my region and yes they have errors without vpn but some non blocked and non removed still have erros on first pc and they always have them(not time to time) can open them in web browser tab without problem For example 2 accs: katrinnna kesssik

[SagalVanderklok]

I'm gonna add extended error messages in the next release. For now try to do the following: 1) remove the problem room from the list, add it again using "bongacams.com" domain name (e.g. https://bongacams.com/kesssik) and start recording with and without VPN 2) close the application, remove "ChatRoomRecorder.exe.WebView2" folder (it locates in a folder with the binary), run the application again and try to start recording

[zxczxc322]

almost solved those errors by adding accounts several times finally 2 accs left and they doesnt work even after 10 times re-adding I just want to find out what is causing this problem because add same accounts 10 times kind of ruin experience by using this programm

[SagalVanderklok]

What are those 2 accounts? Did you use "clear" links like "https://bongacams.com/model" or links copied from the webpage like "https://de.bongacams12.com/model"?

[zxczxc322]

just tried clean links and they still have error

[SagalVanderklok]

What are those links?

[zxczxc322]

is it possible add ability to select timing of monitoring speed in next update(can be like beta version)? because most of recordings start with huge delay bongacams has no bot protection like chaturbate and increased monitoring speed will be fine

[SagalVanderklok]

Sure, In the coming releases I'll refashion the update algorithm so that rooms will be updated in batches with a pause between such updates (both batch sizes and pause lengths will be configurable separately for different websites). But at first I'll need to fix some bugs recently found

[Caxapok-X]

Hello, I would like to know why some accounts have an error status They are not removed or blocked for my region

How did you add them here? I have nothing in this window and I can’t add anyone

[SagalVanderklok]

What happens when you add a chat room?

[Caxapok-X]

What happens when you add a chat room?

Nothing happens. When I paste a link to the model in the "web Browser" tab, there is nothing in the "Chat rooms" tab

[SagalVanderklok]

On the "Web browser" tab you should only pass bot protection. After that you should add URLs on the "Chat rooms" tab. There sould be "+" button to the right of the textbox. Do you have it? By the way, you use an outdated verion (the current version is 1.4.3)

[Caxapok-X]

I downloaded all the software from the site, so I was too lazy to download the version from github, now I have updated it to the latest one, on the first tab they only ask me about the age limit. On the second tab I don't have any "+" Perhaps I did not specify the ffmpeg path correctly, is this path correct?

[SagalVanderklok]

You don't see this button, right?

[Caxapok-X]

You don't see this button, right?

no 🥲🥲🥲

[SagalVanderklok]

Did you change DPI settings of your screen?

[Caxapok-X]

It automatically opens in full screen, but I still can’t see the “+”

[SagalVanderklok]

Try reset DPI settings (if you changed them) and change desktop theme to default

[Caxapok-X]

Try reset DPI settings (if you changed them) and change desktop theme to default

I had "cleartype" disabled, this solved the problem, thanks for the tip

[Caxapok-X]

What is the difference between the records? And do I need to log into my account through the first tab? For example, for private chat entries

[SagalVanderklok]

Try reset DPI settings (if you changed them) and change desktop theme to default

I had "cleartype" disabled, this solved the problem, thanks for the tip

Great job! I'll add that "cleartype" issue to my TODO list

What is the difference between the records? And do I need to log into my account through the first tab? For example, for private chat entries

Sorry, didn't get it. What records do you mean? If you sign in into your account then I guess you'll be able to record private chats (but I didn't test it though)

[Caxapok-X]

I meant this. I couldn’t find a description of these two modes.

[SagalVanderklok]

In "Monitor" mode the app just monitors room status, while in "Record" mode it captures the stream

[zxczxc322]

So in v1.4.4 we can already hope to add the ability to selecting refresh speed?

[SagalVanderklok]

So in v1.4.4 we can already hope to add the ability to selecting refresh speed?

I guess so

[SagalVanderklok]

So in v1.4.4 we can already hope to add the ability to selecting refresh speed?

I've modified the update algorithm in v1.4.4 release. Check it out

[Caxapok-X]

I see this topic is still active, so as not to create a new one, I’ll ask here. Video is recorded in TS format. I encountered a problem where the sound lags behind the event. The delay may be about 50 seconds. I tried to recode the video to another mp4 format but it didn't help. Do I need to install some special codec?

[SagalVanderklok]

It's hard to say. I guess there might be a problem on the other side (i.e. with the encoding)

[Caxapok-X]

It's hard to say. I guess there might be a problem on the other side (i.e. with the encoding) sad

[zxczxc322]

So in v1.4.4 we can already hope to add the ability to selecting refresh speed?

I've modified the update algorithm in v1.4.4 release. Check it out Finally!Will test now Whats range of numbers should be used?because there are no restrictions in the line

[SagalVanderklok]

Concurrent updates count - from 1 to 99, update interval - from 1 to 86400

[zxczxc322]

i mean update interval if it set to 1 errors start appearing after refreshing at 5 it already 10 times faster than was in 1.4.2 and no errors just trying to find optimal numbers

[zxczxc322]

and what means by 'Concurrent updates'? max number of recordings(monitoring) accounts in one time or?

[SagalVanderklok]

Chat rooms are updated in steps with the specified update interval. The maximum number of chat rooms that are updated at every step is limited by "cuncurrent updates" settings.

[zxczxc322]

thanks for your job man finally got what i need perfect tool for me with no lags in recordings and instant monitoring speed

[SagalVanderklok]

You're welcome! By the way if you find this app usefull feel free to support the development ;)

[zxczxc322]

Yeah sure,but it kind of hard make any payment tip from my country also some minor qol advises for next updates like support other camsites,ability to copypaste names from chatroom section import/export account list from txt

[zxczxc322]

today i got error with webview2 click exit and all settings restored include 300+accounts list in this case ability to export/import accounts from txt really matter.

[SagalVanderklok]

Yeah sure,but it kind of hard make any payment tip from my country also some minor qol advises for next updates like support other camsites,ability to copypaste names from chatroom section import/export account list from txt

I'm planning to implement adding chat rooms in bulk by dragging a previously downloaded file or a folder containing such files into the chat rooms list and also by specifying in the URL textbox a path to a text file containing list of chat rooms

Also I'm gonna migrate from a JSON file to an SQLite database, which will reduce chances of corrupting chat rooms list in case of errors

[zxczxc322]

if there are no technical problems it would be nice to add support recording from stripchat in next updates because this is also a large camsite with 10k online models. I'm currently trying to record using other software and it's not working very well.

[SagalVanderklok]

I'm working on some code and GUI improvements now. Then I'm planning to switch from JSON config file to SQLite database. After that I'm gonna look into adding another websites

[zxczxc322]

Recently errors have started appearing during refreshing. Most of the time I used 60 Concurrent updates and update interval set at 5 And for a long time everything was relatively stable, but with adding more accounts(over 500), errors began to appear that may not disappear for like 30 mins. If you slightly change the value even up or down to 1, they start disappear (That's why I think the reason is not the IP address block) and then after a certain number of updates it happens again. seems like i finded new stable numbers like 100/10 but in this case delay befoe recordings start ~3min the only option I see so far is to reduce the list of added accounts

[SagalVanderklok]

There's a bug in the 1.5.1 release which can lead to problems with updating. I've already found the root cause and in the next release the bug will be fixed. For now you can roll back to the 1.5.0 release

[zxczxc322]

There's a bug in the 1.5.1 release which can lead to problems with updating. I've already found the root cause and in the next release the bug will be fixed. For now you can roll back to the 1.5.0 release

but i dont even tried 1,5,1 lol just testing 1.5 couple days after 1.4 btw what benefits SQLite instead JSON?

[SagalVanderklok]

SQLite database is way more reliable and requires far less I/O operations. The problem is that for now there's no way to migrate a chat rooms list from JSON to SQLite

[zxczxc322]

Just tried 1.5.2 most added stripchat accounts have status offline or unknown even if model online and still have same status after refreshes

[SagalVanderklok]

Hm. I don't have any problems. Check the settings and try to use VPN

[zxczxc322]

Hm. I don't have any problems. Check the settings and try to use VPN i always use vpn on second pc for stripchat rec and seems like I figured out what the problem is if i trying open account in browser tab it redirect me to domain with region which blocked from model(even with vpn) on stripchat, in addition to block by region, there is a block by language set in browser is it possible somehow change basic language in webview?