search

SaibotFlow / marax-monitor

Lelit Mara X (V2) data visualisation with an automatic Shot-Timer
GNU General Public License v3.0
62 stars 7 forks source link

3d files for casing #9

Open hanism11 opened 9 months ago

hanism11 commented 9 months ago

Hi @SaibotFlow , huge thanks for providing the code! I alrady bought the reed sensor option when i saw your post. Makes things much more cleaner and easier.

However with the Arduino Nano the previous 3D file from alexrus does not fit as he used a NodeMCU board which is alot bigger than the nano. If i use the 3D casing file he provided then it wont fit.

I understand you are only responsible for the coding side but in any chance you are knowledgeable in the field of 3D printing and can kindly provide a file for a casing that will fit the Nano?

ArrowX77 commented 8 months ago

Hi @hanism11 , I ran into @SaibotFlow 's project an have asked myself the same question on the 3d print casing. Browsing through Thingiverse I have found 3d print files like that: https://www.thingiverse.com/thing:2934049 Even though this is not meant originally for coffee brewing it uses the same display and a Wemos D1 board, so it should be good also for the brew monitor.

hanism11 commented 8 months ago

Hi,

i have found the file from Alexrus’s project and had to ask the guy from the 3d printing shop to make adjustments to fit. It took a few failed prints before i finally got it.

Basically i had to adjust the gap between the poles that mounts the Arduino nano and also the mounting holes for the OLED.