search

Sakati84 / 3DPrintColorizer

Software & Hardware to do multi color printing with Sharpies
GNU General Public License v3.0
425 stars 56 forks source link

seems to be over retracting without marker #36

Closed jmerc77 closed 3 years ago

jmerc77 commented 3 years ago

when there's no marker an its extruding the retracts are longer then the detracts. may vary on the retraction during painting value. still trying to find exact cause...

jmerc77 commented 3 years ago

retraction during painting = 0 did not help this.

Sakati84 commented 3 years ago

Hi, there was a new pull request for the cura Profile which should fix this. You can redownload and Import the Profile or just disable "retract on layer change" in cura.

jmerc77 commented 3 years ago

tried turning off "retract on layer change" but still having the problem. also there are z-hops when z-hop is disabled. another problem is M900 for linear advance on each tool. should be only one tool. gcode.txt

jmerc77 commented 3 years ago

oh I forgot to mention, sometimes it would print slow but sometimes fast. varying feedrate?

jmerc77 commented 3 years ago

hay! randomly started working. I think it was the wall count?? the M900 is still a problem though. I'll post separate issue. although not effecting print quality so far and no warnings.