search

Sakura-IT / ReWarp

WarpOS for AmigaOS 4
GNU Lesser General Public License v3.0
7 stars 1 forks source link

No Sound on Demos #10

Open djbase78 opened 7 years ago

djbase78 commented 7 years ago

I tried ReWarp on my Sam440ep with PatchWarp3D and the Demos Sulaco and ByNight from Encore. Both running great but I have no Sound?

rkujawa commented 7 years ago

Maybe this is the same issue as #9, please take a look at #9 and see if the workaround from there works.

djbase78 commented 7 years ago

No already tried this, pressing or holding mouse buttons has no effect.

rkujawa commented 7 years ago

@DvdBoon Any ideas here?

djbase78 commented 7 years ago

I also see that the system freezes of I set Unit 0: in AHI preds.

DvdBoon commented 7 years ago

Sometimes, AHI prefs shows 2 possibilities regarding your soundcard. I have noticed that chosing one will bring sound to for example glQuake but not demo's and the other way around.

DvdBoon commented 7 years ago

As a side note, patchwarp3d should not be necessary anymore. Refer to ReWarp3DPPC and its ENV options.

djbase78 commented 7 years ago

Hm, I tried ReWarp3D but freezes the system so PatchWarp3D is better working. But will give it another try.

DvdBoon commented 7 years ago

You have to set the ENV stuff in ENVARC:

OK tested bynight. It uses the Music Unit. What have you chosen there as Mode ID/driver?

djbase78 commented 7 years ago

Are the any docs for the env stuff?

In AHI I set to cs4281:HiFi Stereo++

DvdBoon commented 7 years ago

ReWarp3DPPC supports the following arguments (in the form of a file) in ENVARC:Warp3DPPC/

PatchDrawElements: Use Alain Thellier's patch for W3D_DrawElements PatchDrawArray: Use Alain Thellier's patch for W3D_DrawArray PatchDrawLine: Use Alain Thellier's patch for W3D_DrawLine (Needed for FreeSpace) PatchAll: Use all of the above

DvdBoon commented 7 years ago

I personally have a SAM440EP Flex sitting here. I am missing the adapter with the connectors for the cs4281 so I put an SB Live in it. In AHI on Music Unit (so not unit 0) I have chosen EMU10kx HiFi 16bit stereo++.

I cannot test with the cs4281 at the moment as i cannot see any place to connect my music installation so I am guessing it is missing some bracket with a connector.

You sure the Music Unit is not muted?

djbase78 commented 7 years ago

No, everything looks ok, test sound in AHI Prefs works too. :-/

djbase78 commented 7 years ago

I will try to get a sound card, maybe its just a driver issue.

djbase78 commented 7 years ago

Finally tested with a TerraTec Aureon 5.1 and the Sound works. So might be a bug in onboard driver?

DvdBoon commented 7 years ago

AHI also have problems with the old library. I'm not sure how to fix this at the moment. See also the wipe out sound issue