[Issue]: Crashes when trying to configure fortnite pad

NotJarrito commented 3 months ago

Please describe your issue.

Processing pico (platform: https://github.com/maxgerhardt/platform-raspberrypi/archive/60d6ae81fcc73c34b1493ca9e261695e471bc0c2.zip@1.11.0; board: pico; framework: arduino)

Library Manager: Installing https://github.com/Santroller/USB_Host_Shield_2.0/archive/refs/heads/master.zip @ 1.6.2 Unpacking 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Library Manager: USB-Host-Shield-20@1.6.2 has been installed! Library Manager: Installing fortyseveneffects/MIDI Library @ 5.0.2 Unpacking 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Library Manager: MIDI Library@5.0.2 has been installed! Verbose mode can be enabled via -v, --verbose option CONFIGURATION: https://docs.platformio.org/page/boards/raspberrypi/pico.html PLATFORM: Raspberry Pi RP2040 (1.11.0) > Raspberry Pi Pico HARDWARE: RP2040 133MHz, 264KB RAM, 2MB Flash DEBUG: Current (cmsis-dap) External (blackmagic, cmsis-dap, jlink, picoprobe, raspberrypi-swd) PACKAGES:

framework-arduinopico @ 1.30200.0 (3.2.0)
tool-openocd-rp2040-earlephilhower @ 0.0.0
tool-openocd-rp2040-earlephilhower @ 0.0.0
tool-rp2040tools @ 1.0.2

toolchain-rp2040-earlephilhower @ 5.120300.240125 (12.3.0) Flash size: 2.00MB Sketch size: 2.00MB Filesystem size: 0.00MB Maximium Sketch size: 2093056 EEPROM start: 0x101ff000 Filesystem start: 0x101ff000 Filesystem end: 0x101ff000 LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf LDF Modes: Finder ~ chain, Compatibility ~ soft Found 50 compatible libraries Scanning dependencies... Dependency Graph	-- USB-Host-Shield-20 @ 1.6.2	-- MIDI Library @ 5.0.2	-- SPI @ 1.0	-- fxpt_math Building in release mode Compiling .pio\build\pico\FrameworkArduinoBootloader\boot2_w25q080_2_padded_checksum.S.o Compiling .pio\build\pico\src\pico\bt.cpp.o Compiling .pio\build\pico\src\pico\bt_rx.cpp.o Compiling .pio\build\pico\src\pico\hidparser.c.o Compiling .pio\build\pico\src\pico\io.cpp.o Compiling .pio\build\pico\src\pico\main.cpp.o Compiling .pio\build\pico\src\pico\midi_host.c.o Compiling .pio\build\pico\src\pico\pins.cpp.o Compiling .pio\build\pico\src\pico\xinput_device.cpp.o Compiling .pio\build\pico\src\pico\xinput_host.cpp.o Compiling .pio\build\pico\src\shared\config\config.c.o Compiling .pio\build\pico\src\shared\controllers\controllers.c.o Compiling .pio\build\pico\src\shared\hid\hid.cpp.o Compiling .pio\build\pico\src\shared\main\adxl345.cpp.o Compiling .pio\build\pico\src\shared\main\i2c_shared.cpp.o Compiling .pio\build\pico\src\shared\main\max1704x.cpp.o Compiling .pio\build\pico\src\shared\main\mpr121.cpp.o Compiling .pio\build\pico\src\shared\main\ps2.cpp.o In file included from C:\Users\nikei\AppData\Local\SantrollerConfigurator\current\Binaries\platformio\packages\framework-arduinopico/pico-sdk/lib/tinyusb/src/tusb_option.h:198, from src\pico\midi_host.c:27: C:\Users\nikei\AppData\Local\SantrollerConfigurator\current\Binaries\platformio\packages\framework-arduinopico/pico-sdk/lib/tinyusb/src/common/tusb_mcu.h:315: warning: "TUP_DCD_ENDPOINT_MAX" redefined 315	#define TUP_DCD_ENDPOINT_MAX 16

In file included from C:\Users\nikei\AppData\Local\SantrollerConfigurator\current\Binaries\platformio\packages\framework-arduinopico/pico-sdk/lib/tinyusb/src/tusb_option.h:195: include/tusb_config.h:7: note: this is the location of the previous definition 7	#define TUP_DCD_ENDPOINT_MAX 8

Compiling .pio\build\pico\src\shared\main\shared_main.cpp.o In file included from C:\Users\nikei\AppData\Local\SantrollerConfigurator\current\Binaries\platformio\packages\framework-arduinopico/pico-sdk/lib/tinyusb/src/tusb_option.h:198, from src\pico\xinput_device.cpp:1: C:\Users\nikei\AppData\Local\SantrollerConfigurator\current\Binaries\platformio\packages\framework-arduinopico/pico-sdk/lib/tinyusb/src/common/tusb_mcu.h:315: warning: "TUP_DCD_ENDPOINT_MAX" redefined 315

#define TUP_DCD_ENDPOINT_MAX 16

In file included from C:\Users\nikei\AppData\Local\SantrollerConfigurator\current\Binaries\platformio\packages\framework-arduinopico/pico-sdk/lib/tinyusb/src/tusb_option.h:195: include/tusb_config.h:7: note: this is the location of the previous definition 7	#define TUP_DCD_ENDPOINT_MAX 8

Compiling .pio\build\pico\src\shared\main\wii.cpp.o In file included from C:\Users\nikei\AppData\Local\SantrollerConfigurator\current\Binaries\platformio\packages\framework-arduinopico/pico-sdk/lib/tinyusb/src/tusb_option.h:198, from src\pico\xinput_host.cpp:27: C:\Users\nikei\AppData\Local\SantrollerConfigurator\current\Binaries\platformio\packages\framework-arduinopico/pico-sdk/lib/tinyusb/src/common/tusb_mcu.h:315: warning: "TUP_DCD_ENDPOINT_MAX" redefined 315

#define TUP_DCD_ENDPOINT_MAX 16

In file included from C:\Users\nikei\AppData\Local\SantrollerConfigurator\current\Binaries\platformio\packages\framework-arduinopico/pico-sdk/lib/tinyusb/src/tusb_option.h:195: include/tusb_config.h:7: note: this is the location of the previous definition 7	#define TUP_DCD_ENDPOINT_MAX 8

Compiling .pio\build\pico\src\shared\usb\descriptors.cpp.o Compiling .pio\build\pico\src\shared\usb\string_descriptors.c.o Compiling .pio\build\pico\src\shared\usb\xbox.c.o Compiling .pio\build\pico\src\shared\usb\xsm3\excrypt_des.c.o Compiling .pio\build\pico\src\shared\usb\xsm3\excrypt_parve.c.o Compiling .pio\build\pico\src\shared\usb\xsm3\excrypt_sha.c.o Compiling .pio\build\pico\src\shared\usb\xsm3\usbdsec.c.o Compiling .pio\build\pico\src\shared\usb\xsm3\xsm3.c.o Generating linkerscript C:\Users\nikei\AppData\Roaming\SantrollerConfigurator\Santroller.pio\build\pico/memmap_default.ld Compiling .pio\build\pico\lib207\SPI\SPI.cpp.o Compiling .pio\build\pico\lib80f\USB-Host-Shield-20\AMBX.cpp.o Compiling .pio\build\pico\lib80f\USB-Host-Shield-20\BTD.cpp.o Compiling .pio\build\pico\lib80f\USB-Host-Shield-20\BTHID.cpp.o Compiling .pio\build\pico\lib80f\USB-Host-Shield-20\MiniDSP.cpp.o Compiling .pio\build\pico\lib80f\USB-Host-Shield-20\PS3BT.cpp.o Compiling .pio\build\pico\lib80f\USB-Host-Shield-20\PS3USB.cpp.o Compiling .pio\build\pico\lib80f\USB-Host-Shield-20\PS4Parser.cpp.o Compiling .pio\build\pico\lib80f\USB-Host-Shield-20\PS5Parser.cpp.o Compiling .pio\build\pico\lib80f\USB-Host-Shield-20\PS5Trigger.cpp.o Compiling .pio\build\pico\lib80f\USB-Host-Shield-20\PSBuzz.cpp.o Compiling .pio\build\pico\lib80f\USB-Host-Shield-20\SPP.cpp.o Compiling .pio\build\pico\lib80f\USB-Host-Shield-20\SwitchProParser.cpp.o Compiling .pio\build\pico\lib80f\USB-Host-Shield-20\UHS2_gpio.cpp.o Compiling .pio\build\pico\lib80f\USB-Host-Shield-20\Usb.cpp.o Compiling .pio\build\pico\lib80f\USB-Host-Shield-20\Wii.cpp.o Compiling .pio\build\pico\lib80f\USB-Host-Shield-20\XBOXOLD.cpp.o Compiling .pio\build\pico\lib80f\USB-Host-Shield-20\XBOXONE.cpp.o Compiling .pio\build\pico\lib80f\USB-Host-Shield-20\XBOXONESParser.cpp.o Compiling .pio\build\pico\lib80f\USB-Host-Shield-20\XBOXRECV.cpp.o Compiling .pio\build\pico\lib80f\USB-Host-Shield-20\XBOXUSB.cpp.o Compiling .pio\build\pico\lib80f\USB-Host-Shield-20\adk.cpp.o In file included from C:\Users\nikei\AppData\Local\SantrollerConfigurator\current\Binaries\platformio\packages\framework-arduinopico/pico-sdk/lib/tinyusb/src/tusb_option.h:198, from C:\Users\nikei\AppData\Local\SantrollerConfigurator\current\Binaries\platformio\packages\framework-arduinopico/pico-sdk/lib/tinyusb/src/common/tusb_common.h:70, from C:\Users\nikei\AppData\Local\SantrollerConfigurator\current\Binaries\platformio\packages\framework-arduinopico/pico-sdk/lib/tinyusb/src/tusb.h:37, from src\pico\main.cpp:6: C:\Users\nikei\AppData\Local\SantrollerConfigurator\current\Binaries\platformio\packages\framework-arduinopico/pico-sdk/lib/tinyusb/src/common/tusb_mcu.h:315: warning: "TUP_DCD_ENDPOINT_MAX" redefined 315

#define TUP_DCD_ENDPOINT_MAX 16

In file included from C:\Users\nikei\AppData\Local\SantrollerConfigurator\current\Binaries\platformio\packages\framework-arduinopico/pico-sdk/lib/tinyusb/src/tusb_option.h:195: include/tusb_config.h:7: note: this is the location of the previous definition 7	#define TUP_DCD_ENDPOINT_MAX 8

src\shared\main\shared_main.cpp: In function 'uint8_t tick_inputs(void, USB_LastReport_Data_t, uint8_t)': src\shared\main\shared_main.cpp:1579:55: error: 'struct USB_LastReport_Data_t' has no member named 'lastNKROReport' 1579 | lastReportToCheck = &last_report->lastNKROReport; | ^~~~~~ Compiling .pio\build\pico\lib80f\USB-Host-Shield-20\cdc_XR21B1411.cpp.o *** [.pio\build\pico\src\shared\main\shared_main.cpp.o] Error 1 ========================== [FAILED] Took 7.36 seconds ==========================

Version

latest

What operating system are you using?

Windows 11

os-other

No response

What microcontroller are you using?

pi pico

How is your controller programmed?

Direct

sanjay900 commented 3 months ago

Ill fix this but however, you can also use the fortnite instrument mapping mode instead of pad mode, where you configure the guitar as a normal rock band or guitar hero guitar, and then hit add setting, and add a console mode binding for festival.

Then you can hold a button when plugging the guitar in and get mappings for pro mode, and if you dont hold the button itll work in other games .

This will also make both whammy and tilt and strum work.

Ignore that it says "PC", ill fix that it works on all consoles now.

https://santroller.tangentmc.net/tool/fortnite_festival.html

sanjay900 commented 3 months ago

Resolved with v10.1.86

Santroller / Santroller