PC-Tool + Pfadangabe Share auf Homeserver

GoogleCodeExporter commented 9 years ago

Hallo,

leider komme ich nicht weiter.
Meine Vu+Duo greift per CIFS-Share auf den Filmordner vom Homeserver zu.

Welchen Pfad muss ich nun im Valerie PC-Tool unter "Movies" angeben ?

D:\shares\Videos (Freigabe am Homeserver)

Vu+Duo automount Info

//192.168.0.4//Videos on /media/net/Video type cifs ...

Newest Revision

Please provide any additional information below.

Original issue reported on code.google.com by ste...@meka-design.de on 12 Sep 2010 at 10:37

GoogleCodeExporter commented 9 years ago

/media/net/Video

Alternativ kannst du das auch direkt auf der Box im Settingsmenü von 
ValerieSync einstellen.

Original comment by schischu65 on 12 Sep 2010 at 6:13

Changed state: Answered
Added labels: Type-Question
Removed labels: Type-Defect

GoogleCodeExporter commented 9 years ago

Vielen Dank.

Jedoch bekomme ich einen Green-Screen beim Aufruf von "ValerieSync".

VTi "Vu+ Team Image" - V2.0-19.08.2010 OE 1.6

und aktuelle Valerie-Version.

Original comment by ste...@meka-design.de on 12 Sep 2010 at 6:24

GoogleCodeExporter commented 9 years ago

Ok einlesen der Daten mit PC-Tool ist vollzogen.
(Pfadangabe und Dateifilter waren das Problem)

Jedoch werden keinen Filme (bzw. nur leere Balken) in Valerie angezeigt.

Fehlermeldung "Falsche Pfadangabe oder Mount"

media/net/video/movie

evtl. muss ich die paths.conf anpassen.

Jedoch gelingt es mir ums verrecken nicht diese Datei per FTP-Browser zu 
downloaden.

Original comment by ste...@meka-design.de on 12 Sep 2010 at 6:26

GoogleCodeExporter commented 9 years ago

Bitte füge ein Log an.

Original comment by schischu65 on 12 Sep 2010 at 6:26

GoogleCodeExporter commented 9 years ago

Wie komme ich an die lohdatei? Pfadangabe oder so

Original comment by ste...@meka-design.de on 12 Sep 2010 at 6:36

GoogleCodeExporter commented 9 years ago

>> Comment 4 by jan.elvers, Aug 14, 2010 
>> Geh per Putty auf die Box, führe "init 2" aus zum beenden von enigma2, dann 
mit dem >> befehl "enigma2" wieder starten und die Meldungen werden in der 
Session ausgegeben.

Original comment by schischu65 on 12 Sep 2010 at 6:38

GoogleCodeExporter commented 9 years ago

[eDVBCAService] new channel 0x161bb88!
(0)tune
prepare_sat System 1 Freq 11302000 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 
system 1 modulation 2 pilot 2, rolloff 0
tuning to 1552 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:132F:3EF:1:C00000:0:0:0:
allocate demux
[SEC] set static current limiting
[SEC] invalidate current switch params
[SEC] setVoltage 2
FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported
[SEC] sleep 10ms
child has terminated
pipes closed
child has terminated
pipes closed
[ePopen] command: route -n | grep  eth0
poll: unhandled POLLERR/HUP/NVAL for fd 25(16)
poll: unhandled POLLERR/HUP/NVAL for fd 28(17)
set sequence pos 3
Timeout!
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
child has terminated
pipes closed
192.168
169.254
0.0.0.0
nameservers: [[192, 168, 0, 1]]
read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': False, 
'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 0, 1], 'address': [192, 
168, 0, 35]}}
self.ifaces after loading: {'eth0': {'preup': False, 'ip': [192, 168, 0, 35], 
'up': True, 'netmask': [255, 255, 255, 0], 'dhcp': False, 'gateway': [192, 168, 
0, 1], 'postdown': False}}
[Toplevel.importExternalModules] Could NOT import external module: AutoTimer
[Toplevel.importExternalModules] Exception Caught
No module named AutoTimer.AutoTimerResource
[Toplevel.importExternalModules] Could NOT import external module: EPGRefresh
[Toplevel.importExternalModules] Exception Caught
No module named EPGRefresh.EPGRefreshResource
[Toplevel.importExternalModules] Imported external module: Example
[WebInterface] checking for SSL Certificates
[Webinterface] started on 192.168.0.35:80 auth= False ssl= False
[WebInterface.registerBonjourService] No module named Bonjour.Bonjour
[Webinterface] started on 192.168.0.35:443 auth= True ssl= True
[WebInterface.registerBonjourService] No module named Bonjour.Bonjour
[Webinterface] started on 127.0.0.1:80 auth= False ssl= False
poll: unhandled POLLERR/HUP/NVAL for fd 26(16)
(0)fe event: status 1f, inversion on, m_tuning 2
OURSTATE: ok
[eDVBCAService] channel 0x161bb88 running
[eDVBLocalTimerHandler] channel 0x161bb88 running
no version filtering
0014:  70 00 00 00 00 00
mask:  fc 00 00 00 00 00
mode:  00 00 00 00 00 00
[eEPGCache] channel 0x161bb88 running
[EPGC] next update in 2 sec
stop release channel timer
no version filtering
0012:  4e 13 2f 00 00 00
mask:  ff ff ff 00 00 00
mode:  00 00 00 00 00 00
ok ... now we start!!
no version filtering
0000:  00 00 00 00 00 00
mask:  ff 00 00 00 00 00
mode:  00 00 00 00 00 00
eventNewProgramInfo 0 0
have 1 video stream(s) (0780), and 1 audio stream(s) (0783), and the pcr pid is 
0780, and the text pid is 0785
allocate demux
disable teletext subtitles
decoder state: play, vpid=1920, apid=1923
DMX_SET_PES_FILTER(0x780) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x783) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(0) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x780) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x785) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
not pauseable.
[AutoRes] service changed
+- 1/2 TID 4e
+ 1/1 TID 00
done!
no version filtering
006b:  02 13 2f 00 00 00
mask:  ff ff ff 00 00 00
mode:  00 00 00 00 00 00
doing version filtering
0000:  00 00 00 0b 00 00
mask:  ff 00 00 3f 00 00
mode:  00 00 00 3e 00 00
[SEC] set dynamic current limiting
+ 1/1 TID 02
done!
eventNewProgramInfo 0 0
have 1 video stream(s) (0780), and 3 audio stream(s) (0781, 0783, 0782), and 
the pcr pid is 0780, and the text pid is 0785
decoder state: play, vpid=1920, apid=1923
[eDVBCAService] new service 1:0:1:132F:3EF:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:132F:3EF:1:C00000:0:0:0:
[eDVBCIInterfaces] gotPMT
demux 0 mask 01 prevhash 00000000
[eDVBCAService] send 90 bytes
9f 80 32 56 03 13 2f 0d 00 37 01 81 08 00 c0 00 00 03 ef 00 01 82 02 01 00 84 
02 00 6b 09 04 0d 05 e0 dc 09 04 17 02 e1 40 09 04 18 33 e1 a4 09 04 06 48 e0 
78 09 04 0d 95 e1 0e 09 04 09 c4 e1 e0 1b 07 80 00 00 03 07 81 00 00 06 07 83 
00 00 03 07 82 00 00 06 07 85 00 00
doing version filtering
006b:  02 13 2f 0d 00 00
mask:  ff ff ff 3f 00 00
mode:  00 00 00 3e 00 00
++ 2/2 TID 4e
done!
doing version filtering
0012:  4e 13 2f 33 00 00
mask:  ff ff ff 3f 00 00
mode:  00 00 00 3e 00 00
[AutoRes] determineContent
[AutoRes] switch deinterlacer mode to auto
[AutoRes] new content is 1280x720p50
[AutoRes] determined videomode 1080i
sdt update done!
[EPGC] start caching events(1284632262)
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
Timeout!
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1284632269)
no ancillary data in audio stream... abort radiotext pes parser
action ->  InfobarExtensions vtipanel
12
/usr/share/enigma2/Vu_HD/
[VTIPanel] fallback to default translation for System Tools
[VTIPanel] fallback to default translation for Cam Center
[VTIPanel] fallback to default translation for VTI Panel
allocating new converter!
allocating new converter!
allocating new converter!
action ->  SetupActions ok
[VTIPanel] open menu PluginBrowser linked to Erweiterungen
No skin to read...
[***] -
[***] CDInfo AudioCD info from CDDB & CD-Text
[***] Webinterface Konfiguration des Webinterfaces
[***] Bildbetrachter Dateiformate (BMP, PNG, JPG, GIF
[***] EPGImport Automated EPG Importer
[***] MediaScanner Scan Files...
[***] FritzCall Anzeige der Anrufe auf der FRITZ!Box Fon
[***] ProjectValerieSync syncs
[EPGC] schedule finished(1284632292)
[EPGC] stop caching events(1284632292)
[EPGC] next update in 60 min
action ->  WizardActions ok
Looking for embedded skin
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
    res = self.actions[action]()
  File "/usr/lib/enigma2/python/Screens/PluginBrowser.py", line 97, in save
    self.run()
  File "/usr/lib/enigma2/python/Screens/PluginBrowser.py", line 101, in run
    plugin(session=self.session)
  File "/usr/lib/enigma2/python/Plugins/Extensions/ProjectValerieSync/plugin.py", line 299, in main
    session.open(ProjectValerieSync)
  File "/usr/lib/enigma2/python/mytest.py", line 304, in open
    dlg = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
  File "/usr/lib/enigma2/python/mytest.py", line 239, in instantiateDialog
    return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
  File "/usr/lib/enigma2/python/mytest.py", line 270, in doInstantiateDialog
    dlg.applySkin()
  File "/usr/lib/enigma2/python/Components/GUISkin.py", line 112, in applySkin
    self.createGUIScreen(self.instance, self.desktop)
  File "/usr/lib/enigma2/python/Components/GUISkin.py", line 30, in createGUIScreen
    if val.applySkin(desktop, self):
  File "/usr/lib/enigma2/python/Components/GUIComponent.py", line 39, in applySkin
    skin.applyAllAttributes(self.instance, desktop, self.skinAttributes, parent.scale)
  File "/usr/lib/enigma2/python/skin.py", line 293, in applyAllAttributes
    applySingleAttribute(guiObject, desktop, attrib, value, scale)
  File "/usr/lib/enigma2/python/skin.py", line 263, in applySingleAttribute
    guiObject.setBorderColor(parseColor(value))
  File "/usr/lib/enigma2/python/skin.py", line 109, in parseColor
    raise SkinError("color '%s' must be #aarrggbb or valid named color" % (str))
skin.SkinError: {Vu_HD/skin.xml}: color 'grey' must be #aarrggbb or valid named 
color
(PyObject_CallObject(<bound method ActionMap.action of 
<Components.ActionMap.ActionMap instance at 0x176fda0>>,('WizardActions', 
'ok')) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! 
(Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
main thread is non-idle! display spinner!
main thread is non-idle! display spinner!
Killed

Original comment by ste...@meka-design.de on 16 Sep 2010 at 10:18

GoogleCodeExporter commented 9 years ago

Danke, wird gefixt.

Original comment by schischu65 on 16 Sep 2010 at 1:30

Changed state: Accepted
Added labels: Type-Defect
Removed labels: Type-Question

GoogleCodeExporter commented 9 years ago

Probier bitte rev291 aus.

Original comment by schischu65 on 16 Sep 2010 at 4:12

GoogleCodeExporter commented 9 years ago

Juhu. Geht. Bin grad dabei 145 Titel einzulesen.

Danke - Ihr seid wirklich schnell :-)

Werde weiter fleissig testen :thumbs up:

Original comment by ste...@meka-design.de on 16 Sep 2010 at 7:32

GoogleCodeExporter commented 9 years ago

Das ist schön zu hören.

Original comment by schischu65 on 17 Sep 2010 at 6:37

Changed state: Fixed

Schischu / project-valerie

PC-Tool + Pfadangabe Share auf Homeserver #33