search

SchmockLord / Hackintosh-Intel-i9-10900k-AsRock-Z490-Phantom-ITX-TB3

https://www.patreon.com/SchmockLord
https://youtu.be/Sd0zxAxCL1o
158 stars 24 forks source link

Sidecar Problems #11

Closed RaginBajin closed 4 years ago

RaginBajin commented 4 years ago

Wondering what programs you tested to validate that sidecar was successfully working. I’ve mimicked the entire build you have other than OC’ing it and having a hard time getting it to work. I’m wondering to test it against the same programs you used to know if its working or not. I was using FCPX and just getting a black screen. Tried all the tricks, etc. Running iMac20,2.

SchmockLord commented 4 years ago

It mainly depends on your iGPU settings in the BIOS. You need to set IGPU-Multi Monitor to enabled. This forces the iGPU to be enabled, even when a discrete graphics card is detected.

It just works for me. Enable it and I see my Desktop extended on the iPad. Used it with Capture One.

malibio commented 4 years ago

I can also verify that Sidecar works...I have an iPad Pro that I can use as a secondary display.

image

RaginBajin commented 4 years ago

You are right! I doubled checked the BIOS version last night and noticed that I wasn't using the same one you were. That caused me to update as well as go through and validate the iGPU settings. That got sidecar working as it should.

Now, though, it seems to have caused me a different issue where Final Cut Pro will not start up and immediately crashes and it seems to all relate to the use of the iGPU. :(

Any ideas on that..

RaginBajin commented 4 years ago

I'm wondering if I have to change the config.plist to 0300C89B for AAPL,ig-platform-id. https://dortania.github.io/OpenCore-Install-Guide/config.plist/comet-lake.html#deviceproperties

What do you think?

fidalgodev commented 4 years ago

I'm wondering if I have to change the config.plist to 0300C89B for AAPL,ig-platform-id. https://dortania.github.io/OpenCore-Install-Guide/config.plist/comet-lake.html#deviceproperties

What do you think?

Config Mac20,2 already has that at least. The iGPU is used for computing only already with 0300C89B

SchmockLord commented 4 years ago

I can use sidecar with iMac20,2 and iGPU setup for computing only 0300C89B.

often it simply works. But sometimes I also get a timeout when I try to connect to my iPad. I guess this has nothing to do with Hackintosh in general.

RaginBajin commented 4 years ago

So, sidecar is good to go. I have fixed that..

It does look like the config.plist that I am using from your repo which was the iMac20,2 looks to not be using the 0300C89B.

image

RaginBajin commented 4 years ago

Yep that fixed it... Setting that value to 0300C89B gives me Sidecar as well as Final Cut Pro working.