Stuck at Apple Logo with no loading bar

[icydiafire]

Hello Chris.

I just updated my EFI from 0.6.3 to 0.6.4 But I faced a boot problem. After I replaced the EFI folder, with mine Smbios's info... it stuck on Apple logo with no loading bar.

for now I revert to 0.6.3 efi folder fra my backup. I hope you can fix it or advice me for resolving the problem.

[tester89]

Hi, I am getting same error. Hope @SchmockLord fix asap.

[SchmockLord]

Can you please try with the configs from this archive? Archive.zip

[icydiafire]

[icydiafire]

Otherwise it boots Only the boot menu has a problem now, I cannot move the menu right or left so that I can't see when Mac or Windows boot selected. The way I boot it was trying how far I could select with the left arrow until I selected the right disk.

[g3d]

Tried the same config. Didn't really worked for me as well, even with disabled FileVault. Tried this archive and the latest release with USB kexts.

[hackmgrm]

I am getting same error

[SchmockLord]

@g3d and @hackmgrm Can you please try to set these settings: AppleCpuPmCfgLock=1 AppleXcpmCfgLock=1

[SchmockLord]

Can you try the current repo? So download from the landing page and not from the release page.

I have just committed the changes but haven't put out a new release yet until you confirm it is working again.

[g3d]

@SchmockLord would check that in an hour and circle back to you

[hackmgrm]

Can you try the current repo? So download from the landing page and not from the release page.

I have just committed the changes but haven't put out a new release yet until you confirm it is working again.

thanks, i used "releases/tag/v4.1 ", is working now , but boot is slow！

[hackmgrm]

Can you try the current repo? So download from the landing page and not from the release page. I have just committed the changes but haven't put out a new release yet until you confirm it is working again.

thanks, i used "releases/tag/v4.1 ", is working now , but boot is slow！

used “config_iMac20,2_iGPU_display_output.plist” I guess it's the problem with the graphics card that makes the load slow

[g3d]

@SchmockLord latest master working like a charm. Regular update actions (extract EFi, rename config (iGPU compute only) change MLB, Serial, SystemUUID, save & reboot), progressbar visible, system is loading.

[icydiafire]

Tried the new Config file but the problem is still here with the boot menu

[MirkoMela]

Hello, I fixit the issue, now working fine, if you download my fixed EFI for iMac20,2 RX580 with iGPU computing only, remember to add some kext, I don't use AppleALC.kext and disable audio onboard in bios because my hack use for pro audio recording and I use external audio interfaces. I also removed the lan Intel I255 that I don't use but you can always add them. EFI.zip I am attaching my EFI 🗡️

[g3d]

Just updated to latest Big Sur 11.1 RC on new EFI, everything working as it should

[RobyRew]

@g3d and @hackmgrm Can you please try to set these settings: AppleCpuPmCfgLock=1 AppleXcpmCfgLock=1

But Vision D Z490 doesn't have native CFG unlock on the lates UEFI/BIOS version?

[jassingh9]

Updated to latest Master (0.64) and macOS 11.1 today and it all went smoothly. No issues from my end.

[addisonduda]

Also updated to the latest EFI and macOS 11.1 - good GPU (RX580) and CPU (10700K) scores. Nice work everyone