search

SchmockLord / Hackintosh-Intel-i9-10900k-Gigabyte-Z490-Vision-D

https://www.patreon.com/SchmockLord
https://youtu.be/szOofRy7uBc
686 stars 124 forks source link

Fan control #121

Open slehc84 opened 3 years ago

slehc84 commented 3 years ago

Has anyone else got an issue when the fans run flat out. Using the latest versions of everything on here. I have the fan controls set to PWM in bios, but it appears not to take any notice of them. Any suggestions people?

mauticom commented 3 years ago

Hi there,

I'm using the F20a BIOS and I'm using the CPU_FAN port for one of the two PWM fans of my Be Quiet Dark Rock Pro 4 and the SYS_FAN_2 port to control my case fans and the smaller CPU fan. CPU_FAN port works fine in AUTO mode, the SYS_FAN_2 had to be set to PWM to use the fan curves in combination with my internal Fractal Nexus 2 fan hub. I added a manual curve to achieve a very silent system in normal desktop use with internally 28-34 degrees, while the CPU is running at 37-39 degrees celsius.

Make sure you have a PWM fan plugged in (4 pins), 3 pin fans have to be controlled by voltage. Also make sure to pin the fan profile to the right temp sensor.

Hope that helps a little bit.

slehc84 commented 3 years ago

Mauticom, thanks for the suggestion . Just about to add a Alphacool 280 extreme to my 420 rad . Will have a play with your suggestion when its complete . I have had to stop as I fitted a 6800xt Nitro in there and just waiting for osx support :)

mauticom commented 3 years ago

Nice. Can't wait to get a 6800xt myself. Maybe you can open a new issue to let us know about your progress to get it running and what you already tried.

Thank you.