Closed spamilton1 closed 6 months ago
In which Version of my repo are you and which config are u using? iMac w/o iGPU or iMacPro?
I'm using the one for OC0.9.2 iMac W/o iGPU
I've also tried adding the bootarg radnoaudio (saw it elsewhere as a cure), but I don't think it's helped.
Also if it's relevant, both my monitors are using DisplayPort connections, but neither is part of the audio system, I just run audio through my Motu USB interface.
Try a different USB port and cable. To me this sounds like you are using a port that falls back to USB2 and then the bandwidth or power delivery is not keeping up. I also had these issues with my MOTU M2 and also with my vocaster One.
So, I've now tried a number of ports and different cablese and this issue continues with only the hackintosh. When I boot into windows on the same machine, no problems.
I'm wondering if there's something in the USB here that's off or if I need to explore a PCIE usb card
Good news, I got it stable again, it was in fact my USB issues, solved by using the DAC USB port at +0.2V and now it's stable
I've been running a system for a while stably on an RX580, but wanted to update to a RX6800XT. Since doing the change, had a number of issues creep up including studdering audio on my USB audio card (Motu 8Pre) and fullscreen youtube glitches out the monitor a lot.
I did add the Pikera bootarg, but currious if there's other items I need to adjust