search

Scott-Cooper / Drawbot_image_to_gcode_v2

Creates gcode for use on drawbots
http://dullbits.com
GNU General Public License v3.0
165 stars 55 forks source link

could anyone help me how to use the code? thank you! #14

Closed Jacob12138xieyuan closed 4 years ago

Jacob12138xieyuan commented 4 years ago

i run the pde using processing 3, it put the file into a folder and try to run it, but getting errors.

gpeter62 commented 4 years ago

Drawbot_image_to_gcode_v2.zip https://drive.google.com/file/d/1nK4pvmHdBlnL7s3fD_kbT65HHIdOl-kQ/view?usp=drive_web I use Processing version 3.3.6 I use this program. I think, it is on my github too. It runs without problems. This is a test file, it works. Check it! [image: Sinking_of_the_italian_ironclad_Re_d'Italia.jpg]

Jacob notifications@github.com ezt írta (időpont: 2020. máj. 12., K, 16:57):

i run the pde using processing 3, it put the file into a folder and try to run it, but getting errors.

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/Scott-Cooper/Drawbot_image_to_gcode_v2/issues/14#issuecomment-627397873, or unsubscribe https://github.com/notifications/unsubscribe-auth/AIKTQOPWP3E6VONTENY6XS3RRFPUBANCNFSM4M64APUQ .

Ohmarinus commented 4 years ago

First of all start by telling us what errors you are getting. If you don't supply a good question with information it's only logical you will not get a fitting solution as an answer :)

Can you share the errors?

Jacob12138xieyuan commented 4 years ago

Drawbot_image_to_gcode_v2.zip https://drive.google.com/file/d/1nK4pvmHdBlnL7s3fD_kbT65HHIdOl-kQ/view?usp=drive_web I use Processing version 3.3.6 I use this program. I think, it is on my github too. It runs without problems. This is a test file, it works. Check it! [image: Sinking_of_the_italian_ironclad_Re_d'Italia.jpg] Jacob notifications@github.com ezt írta (időpont: 2020. máj. 12., K, 16:57): … i run the pde using processing 3, it put the file into a folder and try to run it, but getting errors. — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#14 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AIKTQOPWP3E6VONTENY6XS3RRFPUBANCNFSM4M64APUQ .

every time i double click the one of the pde file, it always put it in a folder and try to run. it always show strange error, could you tell me the procedure to convert a jpg file to gcode? thank you!

gpeter62 commented 4 years ago

You have to start only Drawbot_image_to_gcode_v2.pde This is the main program

Jacob notifications@github.com ezt írta (időpont: 2020. máj. 12., K, 17:58):

Drawbot_image_to_gcode_v2.zip https://drive.google.com/file/d/1nK4pvmHdBlnL7s3fD_kbT65HHIdOl-kQ/view?usp=drive_web I use Processing version 3.3.6 I use this program. I think, it is on my github too. It runs without problems. This is a test file, it works. Check it! [image: Sinking_of_the_italian_ironclad_Re_d'Italia.jpg] Jacob notifications@github.com ezt írta (időpont: 2020. máj. 12., K, 16:57): … <#m7495941198543940405> i run the pde using processing 3, it put the file into a folder and try to run it, but getting errors. — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#14 (comment) https://github.com/Scott-Cooper/Drawbot_image_to_gcode_v2/issues/14#issuecomment-627397873>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AIKTQOPWP3E6VONTENY6XS3RRFPUBANCNFSM4M64APUQ .

so i should copy the link you give and run any pde file using processing?

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/Scott-Cooper/Drawbot_image_to_gcode_v2/issues/14#issuecomment-627434752, or unsubscribe https://github.com/notifications/unsubscribe-auth/AIKTQOM47BL6BLQZABCYMFDRRFW2PANCNFSM4M64APUQ .

gpeter62 commented 4 years ago

When it starts, a new window will open and you have to choose a JPG image file to convert...

Peter Gautier gautier.p62@gmail.com ezt írta (időpont: 2020. máj. 12., K, 18:03):

You have to start only Drawbot_image_to_gcode_v2.pde This is the main program

Jacob notifications@github.com ezt írta (időpont: 2020. máj. 12., K, 17:58):

Drawbot_image_to_gcode_v2.zip https://drive.google.com/file/d/1nK4pvmHdBlnL7s3fD_kbT65HHIdOl-kQ/view?usp=drive_web I use Processing version 3.3.6 I use this program. I think, it is on my github too. It runs without problems. This is a test file, it works. Check it! [image: Sinking_of_the_italian_ironclad_Re_d'Italia.jpg] Jacob notifications@github.com ezt írta (időpont: 2020. máj. 12., K, 16:57): … <#m_4056818931145644965_m7495941198543940405> i run the pde using processing 3, it put the file into a folder and try to run it, but getting errors. — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#14 (comment) https://github.com/Scott-Cooper/Drawbot_image_to_gcode_v2/issues/14#issuecomment-627397873>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AIKTQOPWP3E6VONTENY6XS3RRFPUBANCNFSM4M64APUQ .

so i should copy the link you give and run any pde file using processing?

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/Scott-Cooper/Drawbot_image_to_gcode_v2/issues/14#issuecomment-627434752, or unsubscribe https://github.com/notifications/unsubscribe-auth/AIKTQOM47BL6BLQZABCYMFDRRFW2PANCNFSM4M64APUQ .

Jacob12138xieyuan commented 4 years ago

When it starts, a new window will open and you have to choose a JPG image file to convert... Peter Gautier gautier.p62@gmail.com ezt írta (időpont: 2020. máj. 12., K, 18:03): … You have to start only Drawbot_image_to_gcode_v2.pde This is the main program Jacob @.> ezt írta (időpont: 2020. máj. 12., K, 17:58): > Drawbot_image_to_gcode_v2.zip > https://drive.google.com/file/d/1nK4pvmHdBlnL7s3fD_kbT65HHIdOl-kQ/view?usp=drive_web > I use Processing version 3.3.6 I use this program. I think, it is on my > github too. It runs without problems. This is a test file, it works. Check > it! [image: Sinking_of_the_italian_ironclad_Re_d'Italia.jpg] Jacob > @. ezt írta (időpont: 2020. máj. 12., K, 16:57): > … <#m_4056818931145644965_m7495941198543940405> > i run the pde using processing 3, it put the file into a folder and try > to run it, but getting errors. — You are receiving this because you are > subscribed to this thread. Reply to this email directly, view it on GitHub <#14 > (comment) > <#14 (comment)>>, > or unsubscribe > https://github.com/notifications/unsubscribe-auth/AIKTQOPWP3E6VONTENY6XS3RRFPUBANCNFSM4M64APUQ > . > > so i should copy the link you give and run any pde file using processing? > > — > You are receiving this because you commented. > Reply to this email directly, view it on GitHub > <#14 (comment)>, > or unsubscribe > https://github.com/notifications/unsubscribe-auth/AIKTQOM47BL6BLQZABCYMFDRRFW2PANCNFSM4M64APUQ > . >

yes i double click Drawbot_image_to_gcode_v2.pde, and it is put in a folder to run, but i get "Cannot find a class or type named “Limit”" error and other errors.

Jacob12138xieyuan commented 4 years ago

ok i figure out, when i download from github, it will add "-master" at the end of the folder name, just delete this it will work.