Open DarkJara opened 6 months ago
check the troubleshooting guide make sure you picked the right mouse in the spoofer make sure you’re not using it in valorant / make sure valorant is not open
I'm having the same issue, I did the troubleshooting but it didn't fix when I first used Aimmy w/arduino it worked my mouse was moving. But literally after 10 seconds of using it it stopped working and kept giving me the same errors he is having. When I try to upload the ino file again I keep getting this error. New Text Document.txt I've ran the troubleshooting steps and put both boards on read only, vanguard isn't even open and I 100% have the right mouse in the spoofer.
And also, my arduino is showing up as Arduino Leonardo in devices and printers, when it was HID-compliant mouse before. And the arduino is showing up in device manager as part of com ports when I disabled my com ports. Sorry to dump this all on you, but I really dont know what to do atp.
Sorry for wasting these messages, you can't set mouse sensitivity to 1.0 on aimmy, set it to something lower.
And also, my arduino is showing up as Arduino Leonardo in devices and printers, when it was HID-compliant mouse before. And the arduino is showing up in device manager as part of com ports when I disabled my com ports. Sorry to dump this all on you, but I really dont know what to do atp.
this happens whenever you press reset on your arduino, you need to upload the script again. if that doesnt work then go to %programfiles(x86)%\Arduino\hardware\arduino\avr\ and uncheck Read-only on boards.txt, then go to %localappdata%\Arduino15\packages\arduino\hardware\avr\1.8.6 and do the same. If the 1.8.6 folder doesn't exist then it's probably called 1.8.5 or something instead. Then go to that folder and uncheck read-only on that too. Then spoof your Arduino again, set the boards.txt file in %programfiles(x86)%\Arduino\hardware\arduino\avr\ back to read-only, then copy that boards.txt and go to %localappdata%\Arduino15\packages\arduino\hardware\avr and replace the one there with the one from %localappdata%. Make sure they're both made Read-only. Then you can try closing and reopening Arduino IDE and uploading the script again.
Sorry for wasting these messages, you can't set mouse sensitivity to 1.0 on aimmy, set it to something lower.
? i dont get what this means you shouldnt be using 1.0 anyway
if your config is stuck on 1.0 then go to your config file and change the sensitivity there
my arduino is named the same like my mouse and has the same vid and pid, i did everything in the troubleshooting guide
thats whats supposed to happen....
there's 0 reason on why it shouldnt work
not sure of what the issue could be
im gonna try another mouse
still doesnt work
still doesnt work
not sure what the issue is
still doesnt work
What OS are you on?
windows 10 but windows 11 should work fine too
still not working, even with the latest version
idk why u sent that those errors are completely normal
Having this exact same issue. I think it must have something to do with something that went wrong during spoofing. My COM port was hidden, and I have made a replica of my mouse, but for whatever reason, my copy of it is getting an error that looks like this, saying it didn't start. There's also another device called "HID-compliant mouse" that was created at the exact same time but is working. Is there some way I can manually fix this?
Having this exact same issue. I think it must have something to do with something that went wrong during spoofing. My COM port was hidden, and I have made a replica of my mouse, but for whatever reason, my copy of it is getting an error that looks like this, saying it didn't start. There's also another device called "HID-compliant mouse" that was created at the exact same time but is working. Is there some way I can manually fix this?
i would try resetting the arduino and uninstalling and reinstalling the arduino ide then doing it all again
I have sadly already done that at least 10-15 times at this point. I have also done every other fix I could find that you mentioned on the main page or from you responding to issues in here. Though I did see another Issues post on here that has the exact same “Device not started (HIDUSB)” problem I had where the spoofed Leonardo mouse wouldn’t turn on because of a driver error, but unfortunately I saw no fix as I believe you both took the conversation to Discord.
Also: I've been trying to undo the spoof on my Arduino and reenable the COM port, and it is straight up not working.
I have sadly already done that at least 10-15 times at this point. I have also done every other fix I could find that you mentioned on the main page or from you responding to issues in here. Though I did see another Issues post on here that has the exact same “Device not started (HIDUSB)” problem I had where the spoofed Leonardo mouse wouldn’t turn on because of a driver error, but unfortunately I saw no fix as I believe you both took the conversation to Discord.
Also: I've been trying to undo the spoof on my Arduino and reenable the COM port, and it is straight up not working.
reinstall arduino ide and upload any script to the arduino and press reset on it while uploading
Tried it again. Yeah, not working at all. Think I'm cooked. May there one day be a KMBox Aimmy update, lol.
Tried it again. Yeah, not working at all. Think I'm cooked. May there one day be a KMBox Aimmy update, lol.
happens to me also, no fix : (
hi, arduino isnt moving my mouse.
try another version of aimmy, it helped me after installing v3
hi, arduino isnt moving my mouse.