Closed dsjove closed 4 years ago
KillingJacky
commented
6 years ago Hi @dsjove , as the open source contributor, we're in the same line, we understand from the original's documentations and utilize the products based on them, here're some resources helpful for you.
dsjove
commented
6 years ago I appreciate the response. I have previously read through the documentation without coming to an understanding of the data format and scan pattern we must use when communicating over the i2C bus. A few well placed comments in your open source code would go a long way to extend the existing documentation.
On Sep 24, 2017, at 7:45 PM, Jack Shao notifications@github.com wrote:
Hi @dsjove https://github.com/dsjove , as the open source contributor, we're in the same line, we understand from the original's documentations and utilize the products based on them, here're some resources helpful for you.
https://github.com/SeeedDocument/Grove_OLED_1.12/raw/master/resources/SH1107G_datasheet.pdf https://github.com/SeeedDocument/Grove_OLED_1.12/raw/master/resources/SH1107G_datasheet.pdf http://wiki.seeed.cc/Grove-OLED_Display_1.12inch/ http://wiki.seeed.cc/Grove-OLED_Display_1.12inch/ — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/Seeed-Studio/OLED_Display_96X96/issues/4#issuecomment-331751783, or mute the thread https://github.com/notifications/unsubscribe-auth/AAC9-yKoJ-P8gWdIXVs5ggIoH2h_Jy_Zks5slvfEgaJpZM4PdvdE.
Thank you for taking the time to post the cpp code for the SH1107G chipset. I keep trying to figure out the logic in drawBitmap. Logic for the scan pattern, bit composition, and framing the source are in there but I am having trouble differentiating them. Would you be able to document the source?