search

Seeed-Studio / seeed-linux-dtoverlays

Device Tree Overlays for Seeed boards
Other
83 stars 55 forks source link

MCP2518FD Installation with the NANO Production module didn't work. #20

Closed barovehicles closed 2 weeks ago

barovehicles commented 3 years ago

When you use the installation procedure with the development board is all ok. But when you try to use with the production module the command: config-by-hardware.py don't work.

I'm using the carrier board B02 with the NANO Production module.

The problem is the Jetson-io library don't work with the production module.

How is possible to solve it?

JakeSays commented 3 years ago

@barovehicles I am only aware of the A02 and B01 carrier boards.

JakeSays commented 3 years ago

@barovehicles I just received a production module and now I see what you mean. It looks like it is in fact an issue with the jetson python scripts and not the driver.

barovehicles commented 3 years ago

Yes. The problem is the python script in the Jetson. that doesn't work with the production module. The problem is understand how to do the procedure manually.

HosakaSu commented 3 years ago

Yes. The problem is the python script in the Jetson. that doesn't work with the production module. The problem is understand how to do the procedure manually.

any suggestions on how to solve this problem ? many thanks

is-qian commented 1 month ago

Sorry for replying to you so late, is there any new progress on this issue?

Lesords commented 2 weeks ago

Hello,

I\'m going to close this issue, feel free to re-open it if you have any other questions.

[Autocommentary]