Debugging code with Ulink2 and ST1

Sensirion / SmartGadget-Android

Deprecated and not maintained anymore. The Sensirion Smart Gadget app allows you to establish a BLE (Bluetooth Low Energy) connection to your Sensirion Smart Gadget. The app displays the current temperature and relative humidity values measured by the integrated sensors.

BSD 3-Clause "New" or "Revised" License

30 stars 15 forks source link

Debugging code with Ulink2 and ST1 #40

Closed manumohannair closed 6 years ago

manumohannair commented 7 years ago

My Ulink2 debugger is not detecting the board. Could anyone help me here ?

StTrow commented 7 years ago

Hi manumohannair. Sure we can help. Did you connect the following pins to your debugger?

SWDCLK (Pin 5 on the SmartHumiGadget connector ST1)
SDWIO (Pin 3)
3V (Pin 6)
GND (Pin 2) You can find the schematics here: https://github.com/Sensirion/SmartGadget-Hardware/blob/master/2214018_V4_Schematic.pdf

Please note that you will need to provide the 3V with an external power supply as the coin cell does not deliver sufficient power for the programming.

What kind of IDE do you use?

abrauchli commented 6 years ago

It looks like this thread concerns the board and not the android software. Marking as closed. Please reopen in https://github.com/Sensirion/SmartGadget-Firmware or https://github.com/Sensirion/SmartGadget-Hardware if this is still a concern.