Wdt v4.0 circuit diagram

[epgodoy]

Hello, My WDT board is version 4.0. It has these pinnout shown in the picture which there is no information on the circuit diagram available on Github. Can you send the v4.0 circuit diagram of the Wdt board? Is there a way we can power on the Rpi after a power off? Because when using the Wdt board, when we do a power off on the Rpi via command, the Wdt keeps the energy on and we can't power on the Rpi again until the WDT battery finishes. Tks

[alexburcea2877]

Hi Eduardo,

The watchdog function is default disbled to prevent unwanted power off the RPI. You need to enable this function by setting a period "wdt -p <value in seconds>" then you have to maintain the wdt by issuing a reload command "wdt -r", or any command even the -p command, periodically at intervals less than the period you set. All this command can be done with cron or with a piton script that runs at startup. This way the watchdog will report your RPI when you shut down or the RPI hung. Please post future questions on our forum https://sequentmicrosystems.com/a/p/forum/so more people can benefit.

Best regards,

În joi, 19 aug. 2021 la 23:04, Eduardo Paciencia Godoy < @.***> a scris:

[image: 20210819_165328] https://user-images.githubusercontent.com/31543410/130135284-a135a48f-986c-40b5-8b88-9c61ce1eddf5.jpg Hello, My WDT board is version 4.0. It has these pinnout shown in the picture which there is no information on the circuit diagram available on Github. Can you send the v4.0 circuit diagram of the Wdt board? Is there a way we can power on the Rpi after a power off? Because when using the Wdt board, when we do a power off on the Rpi via command, the Wdt keeps the energy on and we can't power on the Rpi again until the WDT battery finishes. Tks

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/SequentMicrosystems/wdt-rpi/issues/4, or unsubscribe https://github.com/notifications/unsubscribe-auth/AD3ZCWRCOTMYFBMKLUEXZTLT5VPTBANCNFSM5CO5PZFA . Triage notifications on the go with GitHub Mobile for iOS https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Android https://play.google.com/store/apps/details?id=com.github.android&utm_campaign=notification-email .

-- Alexandru Burcea Sequent Microsystems www.sequentmicrosystems.com

[alexburcea2877]

And the schematics...

În vin., 20 aug. 2021 la 12:56, Alexandru Burcea @.***> a scris:

Hi Eduardo,

The watchdog function is default disbled to prevent unwanted power off the RPI. You need to enable this function by setting a period "wdt -p <value in seconds>" then you have to maintain the wdt by issuing a reload command "wdt -r", or any command even the -p command, periodically at intervals less than the period you set. All this command can be done with cron or with a piton script that runs at startup. This way the watchdog will report your RPI when you shut down or the RPI hung. Please post future questions on our forum https://sequentmicrosystems.com/a/p/forum/so more people can benefit.

Best regards,

În joi, 19 aug. 2021 la 23:04, Eduardo Paciencia Godoy < @.***> a scris:

[image: 20210819_165328] https://user-images.githubusercontent.com/31543410/130135284-a135a48f-986c-40b5-8b88-9c61ce1eddf5.jpg Hello, My WDT board is version 4.0. It has these pinnout shown in the picture which there is no information on the circuit diagram available on Github. Can you send the v4.0 circuit diagram of the Wdt board? Is there a way we can power on the Rpi after a power off? Because when using the Wdt board, when we do a power off on the Rpi via command, the Wdt keeps the energy on and we can't power on the Rpi again until the WDT battery finishes. Tks

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/SequentMicrosystems/wdt-rpi/issues/4, or unsubscribe https://github.com/notifications/unsubscribe-auth/AD3ZCWRCOTMYFBMKLUEXZTLT5VPTBANCNFSM5CO5PZFA . Triage notifications on the go with GitHub Mobile for iOS https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Android https://play.google.com/store/apps/details?id=com.github.android&utm_campaign=notification-email .

-- Alexandru Burcea Sequent Microsystems www.sequentmicrosystems.com

[epgodoy]

And the schematics... În vin., 20 aug. 2021 la 12:56, Alexandru Burcea @.> a scris: … Hi Eduardo, The watchdog function is default disbled to prevent unwanted power off the RPI. You need to enable this function by setting a period "wdt -p " then you have to maintain the wdt by issuing a reload command "wdt -r", or any command even the -p command, periodically at intervals less than the period you set. All this command can be done with cron or with a piton script that runs at startup. This way the watchdog will report your RPI when you shut down or the RPI hung. Please post future questions on our forum https://sequentmicrosystems.com/a/p/forum/so more people can benefit. Best regards, În joi, 19 aug. 2021 la 23:04, Eduardo Paciencia Godoy < @.> a scris: > [image: 20210819_165328] > https://user-images.githubusercontent.com/31543410/130135284-a135a48f-986c-40b5-8b88-9c61ce1eddf5.jpg > Hello, > My WDT board is version 4.0. It has these pinnout shown in the picture > which there is no information on the circuit diagram available on Github. > Can you send the v4.0 circuit diagram of the Wdt board? > Is there a way we can power on the Rpi after a power off? Because when > using the Wdt board, when we do a power off on the Rpi via command, the Wdt > keeps the energy on and we can't power on the Rpi again until the WDT > battery finishes. > Tks > > — > You are receiving this because you are subscribed to this thread. > Reply to this email directly, view it on GitHub > <#4>, or unsubscribe > https://github.com/notifications/unsubscribe-auth/AD3ZCWRCOTMYFBMKLUEXZTLT5VPTBANCNFSM5CO5PZFA > . > Triage notifications on the go with GitHub Mobile for iOS > https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 > or Android > https://play.google.com/store/apps/details?id=com.github.android&utm_campaign=notification-email > . > -- Alexandru Burcea Sequent Microsystems www.sequentmicrosystems.com

Where is the schematics?

[epgodoy]

Hi Eduardo, The watchdog function is default disbled to prevent unwanted power off the RPI. You need to enable this function by setting a period "wdt -p " then you have to maintain the wdt by issuing a reload command "wdt -r", or any command even the -p command, periodically at intervals less than the period you set. All this command can be done with cron or with a piton script that runs at startup. This way the watchdog will report your RPI when you shut down or the RPI hung. Please post future questions on our forum https://sequentmicrosystems.com/a/p/forum/so more people can benefit. Best regards, În joi, 19 aug. 2021 la 23:04, Eduardo Paciencia Godoy < @.***> a scris: … [image: 20210819_165328] https://user-images.githubusercontent.com/31543410/130135284-a135a48f-986c-40b5-8b88-9c61ce1eddf5.jpg Hello, My WDT board is version 4.0. It has these pinnout shown in the picture which there is no information on the circuit diagram available on Github. Can you send the v4.0 circuit diagram of the Wdt board? Is there a way we can power on the Rpi after a power off? Because when using the Wdt board, when we do a power off on the Rpi via command, the Wdt keeps the energy on and we can't power on the Rpi again until the WDT battery finishes. Tks — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#4>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AD3ZCWRCOTMYFBMKLUEXZTLT5VPTBANCNFSM5CO5PZFA . Triage notifications on the go with GitHub Mobile for iOS https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Android https://play.google.com/store/apps/details?id=com.github.android&utm_campaign=notification-email . -- Alexandru Burcea Sequent Microsystems www.sequentmicrosystems.com

Hi, is there any hardware jumper to physically power off/on the RPI on the wdt board? Maybe on those pins I mention before. I am asking it because am using the wdt board with a protected OS on RPI, so I am not able to develop any script. Tks

[alexburcea2877]

There is no way to use it as watchdog without sending commands to it. The watchdog can not know if your RPI is not frizzed if you not talking wit it and will cut the power.

Alex.

În vin., 20 aug. 2021 la 14:28, Eduardo Paciencia Godoy < @.***> a scris:

Hi Eduardo, The watchdog function is default disbled to prevent unwanted power off the RPI. You need to enable this function by setting a period "wdt -p " then you have to maintain the wdt by issuing a reload command "wdt -r", or any command even the -p command, periodically at intervals less than the period you set. All this command can be done with cron or with a piton script that runs at startup. This way the watchdog will report your RPI when you shut down or the RPI hung. Please post future questions on our forum https://sequentmicrosystems.com/a/p/forum/so more people can benefit. Best regards, În joi, 19 aug. 2021 la 23:04, Eduardo Paciencia Godoy < @.***> a scris: … <#m1208240710234652043> [image: 20210819_165328] https://user-images.githubusercontent.com/31543410/130135284-a135a48f-986c-40b5-8b88-9c61ce1eddf5.jpg Hello, My WDT board is version 4.0. It has these pinnout shown in the picture which there is no information on the circuit diagram available on Github. Can you send the v4.0 circuit diagram of the Wdt board? Is there a way we can power on the Rpi after a power off? Because when using the Wdt board, when we do a power off on the Rpi via command, the Wdt keeps the energy on and we can't power on the Rpi again until the WDT battery finishes. Tks — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#4 https://github.com/SequentMicrosystems/wdt-rpi/issues/4>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AD3ZCWRCOTMYFBMKLUEXZTLT5VPTBANCNFSM5CO5PZFA . Triage notifications on the go with GitHub Mobile for iOS https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Android https://play.google.com/store/apps/details?id=com.github.android&utm_campaign=notification-email . -- Alexandru Burcea Sequent Microsystems www.sequentmicrosystems.com

Hi, is there any hardware jumper to physically power off/on the RPI on the wdt board? Maybe on those pins I mention before. I am asking it because am using the wdt board with a protected OS on RPI, so I am not able to develop any script. Tks

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/SequentMicrosystems/wdt-rpi/issues/4#issuecomment-902627329, or unsubscribe https://github.com/notifications/unsubscribe-auth/AD3ZCWVNN67I5KWZZB4UIHTT5Y37VANCNFSM5CO5PZFA . Triage notifications on the go with GitHub Mobile for iOS https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Android https://play.google.com/store/apps/details?id=com.github.android&utm_campaign=notification-email .