search

Serasidis / STM32_HID_Bootloader

Driverless USB HID bootloader and flashing tool for STM32F10X devices
418 stars 150 forks source link

Maple Mini board not connected? #38

Open dbhaig opened 4 years ago

dbhaig commented 4 years ago

Hello. I am running Ubuntu Linux

I have loaded the hid_maple_mini.bin onto my maple mini clone board, following the procedure describe here: https://www.youtube.com/watch?v=Myon8H111PQ

When I plug in the board,

lsusb returns: ID 1209:beba InterBiometrics

ls /dev/ttyUSB* returns nothing

When I try to upload a sketch using the Arduino IDE I get the following messages:

error, counldn't open [/dev/ttyUSB0]

+-----------------------------------------------------------------------+ | HID-Flash v2.2.1 - STM32 HID Bootloader Flash Tool | | (c) 2018 - Bruno Freitas http://www.brunofreitas.com | | (c) 2018-2019 - Vassilis Serasidis https://www.serasidis.gr | | Customized for STM32duino ecosystem https://www.stm32duino.com | +-----------------------------------------------------------------------+

Trying to open the [ttyUSB0]... Unable to open the [ttyUSB0] Searching for [1209:BEBA] device... # [1209:BEBA] device is found ! Sending command... the selected serial port > Sending command... does not exist or your board is not connected

What am I missing? Thanks

Riffer commented 4 years ago

Which version of STM32 core did you install? I had a negative experience with 1.9 and 2.2.2. maybe you give 1.8 a try.

dbhaig commented 4 years ago

I am using 1.9.0. I will give 1.8.0 a try.

Thanks