search

Sevenstax / FreeV2G

Python based Host MPU Application for the use with 8DEVICES WHITE-BEET Embedded ISO15118 Module modules to realize IEC/ISO15118 and DIN70121 conform charging communication between electric vehicles (PEV) and elevtric vehicle supply equipment (EVSE). FreeV2G can e.g. been used with a Raspberry Pi.
Other
56 stars 26 forks source link

Control Pilot State Stuck at F for White-Beet PS 1.1 #160

Closed JPiruzza closed 1 year ago

JPiruzza commented 1 year ago

Hi, I have set up the CP line for EV mode for the White beet PS 1.1 but when I connect it to a charger, I am reading that the CP line voltage is negative (or in state F).

It seems like similar issues has been reported in the past (#126), but the solution relies on firmware updates that do not seem to be available for the SLAC/bridging board.

Are there plans to make this firmware update available to the PS board or do you know any solutions that can be done to fix this issue?

Thanks, Josh

nststx commented 1 year ago

Hi @JPiruzza,

Thanks for submitting your issue. We currently do not have an update for the SLAC firmware planned, however I will further discuss this internally. Regarding a solution to fix this issue, I will take a look at it and come back to you until the end of next week.

Best regards and thanks for your patience, Niklas Stoffers

lho-stx commented 1 year ago

Hey,

we are currently working on different issues and will come back to you as soon as possible!

Thank you for your patience, lho

lho-stx commented 1 year ago

Hey @JPiruzza,

unfortunately there is no update planned in the near future, but you can use a Whitebeet Carrier Board for this. Just do not enable the V2G and SLAC service, then it will behave like a SLAC bridging module.

Best regards, lho