V01_01_06 Tesla model 3 stops @ V2G start with DIN or no ev_target_current and stopping in iso

Sevenstax / FreeV2G

Python based Host MPU Application for the use with 8DEVICES WHITE-BEET Embedded ISO15118 Module modules to realize IEC/ISO15118 and DIN70121 conform charging communication between electric vehicles (PEV) and elevtric vehicle supply equipment (EVSE). FreeV2G can e.g. been used with a Raspberry Pi.

Other

57 stars 26 forks source link

V01_01_06 Tesla model 3 stops @ V2G start with DIN or no ev_target_current and stopping in iso #226

Closed JGitSchel closed 1 year ago

JGitSchel commented 1 year ago

Tesla model 3 connecting with firmware v010106:

Protocol[2] -> ev_target_current keeps 0 in precharge and charge loop parameters
Forced it in pre-charge to 1.0 amps and in charge loop to max current, but then the first message received is 499A max ev current, but the next is 9.0 and then 'stop received'
In Protocol[0] the module doesn't get further than V2G start.. it just times out.

Audi e-tron and peugeot does charge, so what could be the problem with Tesla?

lho-stx commented 1 year ago

Hey @JGitSchel,

thank you for contributing, but please use the issue template and provide all information and logs we ask for. If you have problems creating the log files, please let me know.

Closing this issue until requested information was added.

Thank you, lho