Sevenstax / FreeV2G

Python based Host MPU Application for the use with 8DEVICES WHITE-BEET Embedded ISO15118 Module modules to realize IEC/ISO15118 and DIN70121 conform charging communication between electric vehicles (PEV) and elevtric vehicle supply equipment (EVSE). FreeV2G can e.g. been used with a Raspberry Pi.
Other
56 stars 26 forks source link

Code is Stuck at Session start request #38

Closed Shekhar-devise closed 2 years ago

Shekhar-devise commented 2 years ago

Hello,

I'm using the Gloquad PLC module to interface with the Whitebeet PEV module. Also, we are interfacing the white beet module with an Ethernet interface.

When I have started the repository I got a response up to CP voltage.

Create a new charging session ControlPilot duty cycle: 5.5 after this message, the white beet PEV module should send SessionStarted (C0) status and SessionSetupReq to EVSE. But when we checked its response. we are unable to get it. I am sending the results that we got after running the code.

Python code Output messages:------------------------------------------------------------------- Initiating framing interface iface: enp4s0, mac: C4:93:00:21:56:64 Ev configuration: {'mac': 'C4:93:00:21:56:64', 'ev': {'evid': 'C4:93:00:21:56:64', 'protocol_count': 2, 'protocols': [0, 1], 'payment_method_count': 1, 'payment_method': [0], 'energy_transfer_mode_count': 2, 'energy_transfer_mode': [0, 4]}, 'battery': {'timestep': 10000, 'capacity': 50000, 'level': 49000, 'full_soc': 100, 'bulk_soc': 80, 'max_current': 100, 'max_power': 12000, 'max_voltage': 300, 'target_current': 40, 'target_voltage': 200, 'target_voltage_delta': 10, 'max_current_AC': 0, 'max_voltage_AC': 0, 'min_current_AC': 0}} Set the CP mode to EV Start the CP service Set SLAC to EV mode Start SLAC Wait until an EVSE connects cp_dc = 5.5 EVSE connected Start SLAC matching SLAC matching successful Set V2G mode to EV Set V2G configuration Set DC charging parameters Set AC charging parameters Start V2G Change State to State C controlPilotSetResistorValue res = 0 Create new charging session ControlPilot duty cycle: 5.5


White beet debug log

[ 217.247] [NOTICE] SLAC: stxSLAC_Stop() [ 217.348] [WARN ] V2GCPS: stxV2GCPS_Stop() - Failed [ 217.692] [NOTICE] V2GCPS: Changed Max Current EV State (7) [ 217.692] [NOTICE] V2GCPS: stxXBAR_V2GCPS_NotifyHandler() [ 217.869] [NOTICE] SLAC: stxSLAC_Start() [ 221.466] [NOTICE] V2GCPS: Changed Max Current EV State (1) [ 221.466] [NOTICE] V2GCPS: stxXBAR_V2GCPS_NotifyHandler() [ 221.467] [NOTICE] V2GCPS: stxXBAR_V2GCPS_NotifyHandler() [ 221.468] [NOTICE] V2GCPS: # V2GCPS_INFOTYPE_CP_DUTY_CYCLE [ 221.468] [NOTICE] V2GCPS: Duty cycle is 56 permill [ 226.755] [NOTICE] SLAC: stxSLAC_StartSlacMatchingProcess() [ 226.861] [WARN ] SLAC: # SLAC_STATE_RECV_SLAC_PARAM_CNF - TIMEOUT [ 230.068] [NOTICE] Q7KCOM: PIB File was updated => Download PIB without reset [ 231.458] [NOTICE] Q7KCOM: PIB File was updated => Download PIB without reset [ 231.488] [NOTICE] APL-ETH: Got link: [ 231.488] [NOTICE] APL-ETH: Interface: eth0 [ 231.489] [NOTICE] APL-ETH: MAC: C4:93:00:21:56:65 [ 231.490] [NOTICE] SLACSERV: # NC_SLAC_SUCCESS [ 231.514] [NOTICE] V2GCPS: Changed Max Current EV State (7) [ 231.514] [NOTICE] V2GCPS: stxXBAR_V2GCPS_NotifyHandler() [ 231.515] [NOTICE] V2GCPS: stxXBAR_V2GCPS_NotifyHandler() [ 231.516] [NOTICE] V2GCPS: # V2GCPS_INFOTYPE_CP_DUTY_CYCLE [ 231.516] [NOTICE] V2GCPS: Duty cycle is 1000 permill [ 232.122] [NOTICE] V2GSVC: Starting in EV mode. [ 233.389] [NOTICE] APL-MAIN: [ 233.389] [NOTICE] APL-MAIN: ============================= [ 233.390] [NOTICE] APL-MAIN: NEW LAN CONFIGURATION (IPv6): [ 233.390] [NOTICE] APL-MAIN: for IP Config handle [fe00] [ 233.391] [NOTICE] APL-MAIN: IPv6 Addresses: [ 233.392] [NOTICE] APL-MAIN: Link-Local: fe80:0:0:0 : c693:ff:fe21:5665 [ 233.393] [NOTICE] APL-MAIN: Local: 0:0:0:0 : 0:0:0:0 [ 233.393] [NOTICE] APL-MAIN: DNS1: 2001:4860:4860:0 : 0:0:0:8888 [ 233.394] [NOTICE] APL-MAIN: DNS2: fd00:0:0:0 : be05:43ff:fe44:5280 [ 233.395] [NOTICE] APL-MAIN: ============================= [ 233.396] [NOTICE] APL-MAIN: [ 241.397] [WARN ] APL-ETH: # Unhandled Ethernet notifycode 365 [ 247.356] [NOTICE] Q7K: ========================================= [ 247.356] [NOTICE] Q7K: CPU ON RECEIVED [ 247.357] [NOTICE] Q7K: ========================================= [ 247.358] [NOTICE] Q7K: QCA7K_SPI_REG_SIGNATURE = 0xAA55 [ 247.359] [NOTICE] Q7K: ========================================= [ 247.360] [NOTICE] Q7K: QCA700x is READY [ 247.360] [NOTICE] Q7K: ========================================= [ 248.885] [NOTICE] Q7KCOM: ======================================= [ 248.885] [NOTICE] Q7KCOM: FW and PIB was loaded successful [ 249.327] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.328] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.329] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.330] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.331] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.332] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.333] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.334] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.335] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.336] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.337] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.338] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.339] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.340] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.341] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.342] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.344] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.345] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.346] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.347] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.348] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.349] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.350] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.351] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.352] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.353] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.354] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.355] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.356] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.357] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.358] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.359] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.360] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.361] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.362] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.363] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.364] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.365] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.367] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.368] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.369] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.370] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.371] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.372] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.373] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.374] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.375] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.376] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.377] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.378] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.379] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.380] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.381] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.382] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.383] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.384] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.385] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.386] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.387] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.389] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.390] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.391] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.392] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.393] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.394] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.395] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.396] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.397] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.398] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.399] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.400] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.401] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.402] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.403] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.404] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.405] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.406] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.407] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.408] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.409] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.411] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.412] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.413] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.414] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.415] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.416] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.417] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.418] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.419] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.420] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.421] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.422] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.423] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.424] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.425] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.426] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.427] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.428] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.429] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.430] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.431] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.432] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.434] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.435] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.436] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.437] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.438] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.439] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.440] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.441] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.442] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.443] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.444] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.445] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.446] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.447] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.448] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.449] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.450] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.451] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.452] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.453] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.454] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.456] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.457] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.458] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.459] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.460] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.461] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.462] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.463] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.464] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.465] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.466] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.467] [WARN ] Q7K: Not enough space to send out frame (0 available, 84 needed) [ 249.468] [NOTICE] Q7K: ========================================= [ 249.469] [NOTICE] Q7K: CPU ON RECEIVED [ 249.469] [NOTICE] Q7K: ========================================= [ 249.470] [NOTICE] Q7KCOM: ======================================= [ 249.471] [NOTICE] Q7KCOM: BOOT FROM HOST READY [ 249.472] [NOTICE] Q7K: QCA7K_SPI_REG_SIGNATURE = 0xAA55 [ 249.473] [NOTICE] Q7K: ========================================= [ 249.474] [NOTICE] Q7K: QCA700x is READY [ 249.474] [NOTICE] Q7K: ========================================= [ 251.490] [NOTICE] APL-ETH: Lost link: [ 251.491] [NOTICE] APL-ETH: Interface: eth0 [ 251.491] [NOTICE] APL-ETH: MAC: C4:93:00:21:56:65 [ 251.492] [NOTICE] APL-MAIN: [ 251.492] [NOTICE] APL-MAIN: ============================= [ 251.493] [NOTICE] APL-MAIN: LAN CONFIGURATION DELETED: [ 251.494] [NOTICE] APL-MAIN: for IP Config handle [fe00] [ 251.494] [NOTICE] APL-MAIN: IPv6 Addresses: [ 251.495] [NOTICE] APL-MAIN: Link-Local: 0:0:0:0 : 0:0:0:0 [ 251.496] [NOTICE] APL-MAIN: Local: 0:0:0:0 : 0:0:0:0 [ 251.497] [NOTICE] APL-MAIN: DNS1: 0:0:0:0 : 0:0:0:0 [ 251.497] [NOTICE] APL-MAIN: DNS2: 0:0:0:0 : 0:0:0:0 [ 251.498] [NOTICE] APL-MAIN: ============================= [ 251.499] [NOTICE] APL-MAIN:

Can you please help us to rectify and solve this issue.

jpo-stx commented 2 years ago

Hello @Shekhar-devise , there are nothing strange happening from looking at the logs you provided. There is a port mirror available on the whitebeet module that will mirror the data from the PLC to the ethernet interface. Can you please activate it and do a wireshark log of the whitebeets ethernet port? That would be really helpful, Please refer to the manual chapter 12.3.10 - 12.3.13.

Shekhar-devise commented 2 years ago

I am sending the wire shark logs with code output.please check. I have already set mirror state as per the white beet manual. Getting same response again.

Initiating framing interface iface: eth0, mac: C4:93:00:21:56:64 Ev configuration: {'mac': 'C4:93:00:21:56:64', 'ev': {'evid': 'C4:93:00:21:56:64', 'protocol_count': 2, 'protocols': [0, 1], 'payment_method_count': 1, 'payment_method': [0], 'energy_transfer_mode_count': 2, 'energy_transfer_mode': [0, 4]}, 'battery': {'timestep': 10000, 'capacity': 50000, 'level': 49000, 'full_soc': 100, 'bulk_soc': 80, 'max_current': 100, 'max_power': 12000, 'max_voltage': 300, 'target_current': 40, 'target_voltage': 200, 'target_voltage_delta': 10, 'max_current_AC': 0, 'max_voltage_AC': 0, 'min_current_AC': 0}} Set the CP mode to EV Start the CP service Set SLAC to EV mode Start SLAC Wait until an EVSE connects cp_dc = 5.5 EVSE connected Start SLAC matching SLAC matching successful Set V2G mode to EV Set V2G configuration get v2g configuration get conf res = {'evid': b'\x01\x02\x03\x04\x05\x06', 'protocol_count': 2, 'protocol': [0, 1], 'payment_method_count': 1, 'payment_method': [0], 'energy_transfer_mode_count': 1, 'energy_transfer_mode': [1], 'battery_capacity': 50000} Set DC charging parameters Set AC charging parameters Start V2G Change State to State C controlPilotSetResistorValue res = 0 Create new charging session ControlPilot duty cycle: 100.0

wireshark_logs.pcapng.zip

Shekhar-devise commented 2 years ago

@jpo-stx Hi have you found anything strange?

jpo-stx commented 2 years ago

Hi @Shekhar-devise it seems that the QCA is restarted and therefore looses the link: [ 247.356] [NOTICE] Q7K: CPU ON RECEIVED My collegue is currently checking why the QCA is restarted. Have you started a v2g session before the one that is shown in the log?

Shekhar-devise commented 2 years ago

Have you found why QCA is restarting? Have you started a v2g session before the one that is shown in the log? yes, we have started the V2G session before the log.

jpo-stx commented 2 years ago

Hello @Shekhar-devise ,

we were not yet able to reproduce the issue. Further Questions:

Shekhar-devise commented 2 years ago

HI, We are using the following firmware: WHITEBEET_ISO15118_EV_V01_00_04.fwu

It happens every time when we are running it.

Yes it is also happening in the first senssion after a reboot.

jpo-stx commented 2 years ago

Can you please send me a complete log of the UART and wiresshark trace from boot on?

Shekhar-devise commented 2 years ago

Sharing a screenshot of the Firmware version that we are using Current_Firmware (1) g

jpo-stx commented 2 years ago

Hi @Shekhar-devise ,

in the second line I see that you are using the old v1 of the QCA firmware. Can you try with the new version, by setting the DIP switch SW1 to "FW VER NEW".

Have you switched to the old version intentionally?

Shekhar-devise commented 2 years ago

We have changed that switch to "FW VER NEW" but the problem is the same.

jpo-stx commented 2 years ago

Do you have the possibility to use another counterpart on EVSE side?

Since we cannot reproduce this issue here can please do what I asked for in https://github.com/Sevenstax/FreeV2G/issues/38#issuecomment-1085591446:

Can you please send me a complete log of the UART and wiresshark trace from boot on?

Shekhar-devise commented 2 years ago

@jpo-stx please check I have added the the whitebeet log from boot and EVSE simulator log.pleaes check EVSElog.txt PEV.txt .

jpo-stx commented 2 years ago

@Shekhar-devise can you also add the wireshark log with port mirror enabled. It is importent to have both logs of the same process. So please start logging of the debug port and the ethernet with port mirror enabled an do a clean start of the Whitebeet module and attach the files to this issue. This would be really helpful to analyze the issue.

lho-stx commented 2 years ago

@Shekhar-devise, as there is no progress in this issue it will be closed. If you still encounter this issue, please reopen! Best regards, lho