R5 and R6 at wrong location? (Classic Composite v2.1e)

ShawMerlin / NES-Power-Module-Redesign

Completely Redesigning the NES Power Module to Reduce Noise and EMI

MIT License

86 stars 4 forks source link

R5 and R6 at wrong location? (Classic Composite v2.1e) #9

Closed bitdo1 closed 9 months ago

bitdo1 commented 9 months ago

I tried loading the gerber, BOM, and POS files for Classic Composite v2.1e into https://jlcpcb.com/ and the position of R5 and R6 are not in the correct location.

Other minor things:

J3, J4, J5 are missing from POS (the 3 RCA connectors)
C11 50uP 50V cap has no inventory. There were a couple 47uP 50V caps with same 0805 package to choose from.
C8 220uF cap only had 5 in stock and I couldn't find an alternative with same dimensions

I saw in previous issue you are working on a new board so I'll hold off on this for now.

ShawMerlin commented 9 months ago

Thank you for the feedback. I will be removing this design once the new one is available but I appreciate you finding these.

The newer design (which I am currently testing) will have easier to source parts that can be bought at places like DigiKey/Mouser but also assembly at JLCPCB.

For an alternative to C8, you can use LSCS C2757945

I didn't include the Jacks in the POS as I just did those myself instead of having it assembled. I didn't feel it was worth the cost of those connectors and soldering compared to just doing it myself. I can include that in later releases.

Thanks again, -Merlin Shaw

bitdo1 commented 9 months ago

Just read the "NES Revival RGBNES Companion Power Module" page. If I am not doing NESRGB, can the 3.0 board be used as a replacement power supply with legacy composite video/internal audio? Maybe just needs a jumper from J1 video to J8 comp.

ShawMerlin commented 9 months ago

The NESRGB "Companion" Power Board can do internal audio/video. These are selected with the slide switches that are on the board.

On Wed, Jan 17, 2024 at 3:08 PM Bitdo @.***> wrote:

Just read the "NES Revival RGBNES Companion Power Module" page. If I am not doing NESRGB, can the 3.0 board be used as a replacement power supply with legacy composite video/internal audio? Maybe just needs a jumper from J1 video to J8 comp.

— Reply to this email directly, view it on GitHub https://github.com/ShawMerlin/NES-Power-Module-Redesign/issues/9#issuecomment-1897051405, or unsubscribe https://github.com/notifications/unsubscribe-auth/AQZJHHUJVHLUWA5VG5DN76TYPBDUZAVCNFSM6AAAAABB5TH3IOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQOJXGA2TCNBQGU . You are receiving this because you commented.Message ID: @.***>