Software to Control

[malu254]

Hello @Shuraxxx, is there already a finished Software which works to Control the Unit? I would like to add this to my Spa to control it via Mqtt.

[Shuraxxx]

Hello @Shuraxxx, is there already a finished Software which works to Control the Unit? I would like to add this to my Spa to control it via Mqtt.

Hello @malu254, yes. Check out the repository

[malu254]

@Shuraxxx thanks for adding the code to this repository, unfortunately it looks like the "Balboa_GS_Interface.cpp" and the Balboa_GS_Interface.h from your repository do not match the .ino file. I tried to compile it, but got the Error for every Bit from Bit31 to Bit71 in the Mqtt section.

[helper0815]

Hello @Shuraxxx, I would also like to use the project to control my SPA.

Hello @Shuraxxx, is there already a finished Software which works to Control the Unit? I would like to add this to my Spa to control it via Mqtt.

Hello @malu254, yes. Check out the repository

But, I get the same errors as @malu254 Could you please update the other two files(Balboa_GS_Interface.cpp, Balboa_GS_Interface.h )?

Many thanks in advance

[zarzak12]

Hello, I have the same error ... impossible to compile this project

[Shuraxxx]

@Shuraxxx thanks for adding the code to this repository, unfortunately it looks like the "Balboa_GS_Interface.cpp" and the Balboa_GS_Interface.h from your repository do not match the .ino file. I tried to compile it, but got the Error for every Bit from Bit31 to Bit71 in the Mqtt section.

Я исправил, проверте

[malu254]

@Shuraxxx thanks for adding the code to this repository, unfortunately it looks like the "Balboa_GS_Interface.cpp" and the Balboa_GS_Interface.h from your repository do not match the .ino file. I tried to compile it, but got the Error for every Bit from Bit31 to Bit71 in the Mqtt section.

Я исправил, проверте

Now it works, many thanks for adding your code. I found a small Problem with the OTA Handling and added a PR for it

[duczz]

@malu254 how to you import the zip file? i get always an error (the main from this fork i can import)

[malu254]

@malu254 how to you import the zip file? i get always an error (the main from this fork i can import)

@duczz, Iam using the Arduino IDE, therfore i created a project folder and only used this three files to flash on the ESP8266 https://github.com/Shuraxxx/-Balboa-GS523SZ-with-panel-VL801D-DeluxeSerie--MQTT/blob/main/src/Balboa_GS_Interface.cpp https://github.com/Shuraxxx/-Balboa-GS523SZ-with-panel-VL801D-DeluxeSerie--MQTT/blob/main/src/Balboa_GS_Interface.h https://github.com/Shuraxxx/-Balboa-GS523SZ-with-panel-VL801D-DeluxeSerie--MQTT/blob/main/Balboa_GS_MQTT/Balboa_GS_MQTT.ino

[duczz]

@malu254 i tried this too. 1 folder with all 3 files and i get this error

[malu254]

Okay, that shouldn’t be, please try to set it in ““ instead of <>

[duczz]

yeah thats work, thank you. Do you use it with homeassistant too?

[malu254]

yeah thats work, thank you. Do you use it with homeassistant too?

Your welcome, no im Using IOBroker

[duczz]

which spa do you use? Balboa-GS523SZ or Balboa-GS510SZ i don't know which project i shoud use i have a Balboa-GS510DZ it looks like both are simulary

[malu254]

which spa do you use? Balboa-GS523SZ or Balboa-GS510SZ i don't know which project i shoud use i have a Balboa-GS510DZ it looks like both are simulary

@duczz I think you schould use this version https://github.com/MagnusPer/Balboa-GS510SZ