Open Amesh-Kahloon-Calgary-Account opened 4 days ago
There are many errors in your design. Did you go through the "v" verification?
Please make sure there are no errors.
@Amesh-Kahloon-Calgary-Account
Hi Lukas, the errors are from pin issues and connectivety when I use a 1550 nm wavelength SiN grating coupler connected towards a taper. I tried to fix the issue but the grating coupler always snaps to the other end of the taper. The example layout you posted for the 1550 nm wavelength SiN grating coupler connected to a SiN taper also had the same errors when I run the "v" verification on KLayout. This issue does not happen for the 1330 nm wavelength case.
Please update your EBeam PDK and SiEPIC-Tools. The issue of the pin on the GC was fixed last week.
Welcome, new contributor!
Thank you for uploading your design.
If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V).
You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline.