Adding support for zigbee2mqtt Aqara Opple 3x2

Sian-Lee-SA / Home-Assistant-Switch-Manager

Switch manager is a centralised component to handle button pushes for your wireless switches. This includes anything passed through the event bus. The component relies on switch blueprints which is easily made to allow GUI configuration of your switches and their button pushes. This helps remove clutter from the automations.

Other

269 stars 88 forks source link

Adding support for zigbee2mqtt Aqara Opple 3x2 #87

Closed Dunkelschunkel closed 1 year ago

Dunkelschunkel commented 1 year ago

Tested locally with my on device @Sian-Lee-SA: I also checked the docs from zigbee2mqtt Aqara Opple 3x2 an it seems to work just fine.

Everything is based on the deconz blueprint for the same device as mentioned in issue 78

Blueprint Checklist

[x] You viewed the README and conformed to the naming conventions
[x] You ordered the actions as stated in the README action order
[x] All filenames are lowercase and uses '-' for spaces and not '_' while using {service-name}-{switch-name-or-type}.yaml format
[x] Images are png
[x] Image backgrounds are transparent and is cropped to the device boundries
[x] Images has a maximum width of 800px and maximum height of 500px
[x] There are no missing buttons or actions
[x] Your integration/service is running on the latest version
[x] You have tested your blueprints and made sure each button and action works

Sian-Lee-SA commented 1 year ago

The image isn't cropped to the device boundries.

Sian-Lee-SA commented 1 year ago

So I went ahead and changed the ones you copied from (I didn't realise they weren't cropped properly). I will do yours for you as it's fair to say you were just going by whats already in the repo

Dunkelschunkel commented 1 year ago

@Sian-Lee-SA thank you

Dunkelschunkel commented 1 year ago

@Sian-Lee-SA should I add the other, smaller aqara switches for zigbee2mqtt as well? I do not own any other than the 3x2 one but I assume they are similar.

Sian-Lee-SA commented 1 year ago

Just confirm with the zigbee2mqtt docs for the devices and what they have in their action section then I'll merge if all matches etc. Generally I would say no because I don't want the headaches of issues popping up about non working blueprints because it wasn't tested properly etc. But I'll let this one slide as they should be similar.

Dunkelschunkel commented 1 year ago

I'll check everything with the documentation at zigbee2mqtt and the blueprints from the deconz

Jan 26, 2023 10:56:46 AM Sian @.***>:

Just confirm with the zigbee2mqtt docs for the devices and what they have in their action sectio then I'll merge. Generally I would say no because I don't want the headaches of issues popping up about non working blueprints because it wasn't tested properly etc. But I'll let this one slide as they should be similar.

— Reply to this email directly, view it on GitHub[https://github.com/Sian-Lee-SA/Home-Assistant-Switch-Manager/pull/87#issuecomment-1404773783], or unsubscribe[https://github.com/notifications/unsubscribe-auth/AT5ZC5IBKWIRIAXP6POTFFTWUJC53ANCNFSM6AAAAAAUGYCFO4]. You are receiving this because you authored the thread.[Tracking image][https://github.com/notifications/beacon/AT5ZC5O2SZRQQKKLK3JYAZ3WUJC53A5CNFSM6AAAAAAUGYCFO6WGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSTXMSZO.gif]

Sian-Lee-SA commented 1 year ago

Also make sure you copy from the updated files in this repo as they're cropped and repositioned but not in a release yet