search

Sienci-Labs / gsender

Connect to and control Grbl-based CNCs with ease
https://sienci.com/gsender/
Other
178 stars 41 forks source link

Zeroing causes probe to plunge beyond zero point #477

Closed cvandermey closed 5 months ago

cvandermey commented 6 months ago

1.4.3. Autozero touchplate, 1/4 bit using "auto". Running "probe" touches off correctly, then moves to x/y 0, then slowly plunges into the spoilboard continuously (gsender reports -0.97" depth before it throws an error.)

bigbearct commented 6 months ago

Had the same experience , nearly broke the bit .

kglovern commented 5 months ago

We were able to reproduce a separate issue with auto-zero probing related to $13 enabled, but weren't able to recreate this issue specifically.

Do you have $13 enabled in your EEPROM settings? If you disable it, do you see the same behaviour?

kglovern commented 5 months ago

1.4.4 has fixes to autoZero with $13 enabled related to X and Y movement - let us know if you're still having issues with the Z. Again, we were unable to reproduce that specifically while identifying other issues.

kglovern commented 5 months ago

It's been 2 weeks without further comments - if this is still an issue, re open another issue.