search

Sienci-Labs / gsender

Connect to and control Grbl-based CNCs with ease
https://sienci.com/gsender/
Other
178 stars 41 forks source link

1.4.3 Rapid/Precise jogging presets don't work #478

Closed cvandermey closed 4 months ago

cvandermey commented 6 months ago

Normal preset in gsender works for jogging operations - z/x/y. However, when selecting rapid/precise, the machine doesn't respond. I see error 22 in the console: feeder $J=G20G91 Y0 F0 error:22 (Undefined feed rate)

bigbearct commented 6 months ago

Also doesn't seem to save them from job to job. Precise would go either really really precise and rapid would also go very slow until I would default the settings and then seemed to clear it up until I setup a new job and have to go thru it again.

kglovern commented 5 months ago

This should be resolved with next release.

kglovern commented 5 months ago

Let us know if 1.4.4 has resolved these issues for you.

bigbearct commented 5 months ago

1.4.4 still doesn't save or hold the settings. I usually have to do a restore settings for the 3 different speeds to work correctly.

walidkayhan commented 4 months ago

@bigbearct are you still facing this issue on the latest version, v1.4.6?

bigbearct commented 4 months ago

no issues since going 1.4.6

walidkayhan commented 4 months ago

That's great to hear 😃 if you notice another problem with jogging presets or anything else please open another issue