PRI is enough ?

[Powershell-coder]

Hi I get access to an E1 with PRI link. So no PC details available. How can i use it with SigPloit ?

[SigPloiter]

Hello , sorry for my late reply, unfortunately sigploit is compiled to be used for sigtran, and the stack used supports dialogic hardware drivers for E1

On Tuesday, 9 January 2018, EhsanArio notifications@github.com wrote:

Hi I get access to an E1 with PRI link. So no PC details available. How can i use it with SigPloit ?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/SigPloiter/SigPloit/issues/117, or mute the thread https://github.com/notifications/unsubscribe-auth/AXXuv02aGDiMLsgd_TG4Nel0P5UzdBBBks5tI1uLgaJpZM4RXwQN .

[SigPloiter]

BUT If u can give me more info about ur setup and ll try to help

On Thursday, 11 January 2018, loay abdelrazek loay.razek@gmail.com wrote:

Hello , sorry for my late reply, unfortunately sigploit is compiled to be used for sigtran, and the stack used supports dialogic hardware drivers for E1

On Tuesday, 9 January 2018, EhsanArio notifications@github.com wrote:

Hi I get access to an E1 with PRI link. So no PC details available. How can i use it with SigPloit ?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/SigPloiter/SigPloit/issues/117, or mute the thread https://github.com/notifications/unsubscribe-auth/AXXuv02aGDiMLsgd_TG4Nel0P5UzdBBBks5tI1uLgaJpZM4RXwQN .

[Powershell-coder]

Thanks for your answer.

My main question is How can i access to ss7 network to test Sigploit ? But i asked my local telecommunication center to give me an E1 link with access to SS7. But they told me SS7 is only for interconnection between telecommunication centers and not for end-users. And they told Can give me an E1 link with access to PRI which is something like SS7 and for end-users. unfortunately in PRI no PC IP and PORT available.

And also a SIP Trunk is available to use.

How can i access to SS7 network to test Sigploit in Live mode ?

Thanks

[SigPloiter]

there are providers that can provide SS7 interconnection for end-users/companies but mostly they are in europe and USA, there are also SMS service providers whom can provide you with SS7 interconnection, you need to look for them

On Sat, Jan 13, 2018 at 11:53 PM, EhsanArio notifications@github.com wrote:

Thanks for your answer.

My main question is How can i access to ss7 network to test Sigploit ? But i asked my local telecommunication center to give me an E1 link with access to SS7. But they told me SS7 is only for interconnection between telecommunication centers and not for end-users. And they told Can give me an E1 link with access to PRI which is something like SS7 and for end-users. unfortunately in PRI no PC IP and PORT available.

And also a SIP Trunk is available to use.

How can i access to SS7 network to test Sigploit in Live mode ?

Thanks

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/SigPloiter/SigPloit/issues/117#issuecomment-357488749, or mute the thread https://github.com/notifications/unsubscribe-auth/AXXuvy66MpyrHXZ3ilIb6afJ-u11in68ks5tKYhdgaJpZM4RXwQN .

[Powershell-coder]

Thanks for quick answer Europe is good for me. I tried some SIP Trunk Providers. Is there enough to set their server ip insteade of PC IP ?

there are providers that can provide SS7 interconnection for end-users/companies but mostly they are in europe and USA, there are also SMS service providers whom can provide you with SS7 interconnection

May you please introduce some of them and websites ? And tell me which data do i need to get from these companies ?(PC IP and Port)

[devcoinfet]

Ok, Here's my question. If I were to use sip / ISUP is there a configuration in the end user part of the sip system to set all the necessary info like the point code global titles is all this still needed?

or is the setup for Your tool going to be different than if we were to use an ss7 interconnect and anyone needing said access can contact me for further details. ss7 is the easy part i'm curious on the sip setup

[SigPloiter]

Send me ur email please to discuss more

On Monday, 5 March 2018, devcoinfet notifications@github.com wrote:

Ok, Here's my question. If I were to use sip / ISUP is there a configuration in the end user part of the sip system to set all the necessary info like the point code global titles is all this still needed?

or is the setup for Your tool going to be different than if we were to use an ss7 interconnect and anyone needing said access can contact me for further details. ss7 is the easy part i'm curious on the sip setup

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/SigPloiter/SigPloit/issues/117#issuecomment-370290300, or mute the thread https://github.com/notifications/unsubscribe-auth/AXXuv5xW2SdrtH7VOwoDt4Mt1NyIQHRIks5tbJ6pgaJpZM4RXwQN .

[devcoinfet]

wabefet@gmail.com

I, Was reading allot of Your Code and had a few questions that do require us talking in a private setting if You don't mind so email is fine.

[Adewale121]

hello bro please can you help me?i have network provider who are willing to give me any necessary parameters or Datas needed to go on live mode on sigploit but my major conncern bro , what are the parameters or datas need to be on live mode mostly for sms interception or sniffing thank you

[SigPloiter]

If the provider willing to give you the parameters then they know what should they provide , did they tell you what will they provide ? If not how did you know they are willing to provide connection ?

On Thursday, 1 November 2018, Adewale121 notifications@github.com wrote:

hello bro please can you help me?i have network provider who are willing to give me any necessary parameters or Datas needed to go on live mode on sigploit but my major conncern bro , what are the parameters or datas need to be on live mode mostly for sms interception or sniffing thank you

— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub https://github.com/SigPloiter/SigPloit/issues/117#issuecomment-435161404, or mute the thread https://github.com/notifications/unsubscribe-auth/AXXuv7nOTJNVZpkgxOUZoL6BwLHaC7zWks5uq04zgaJpZM4RXwQN .

[Adewale121]

No actually bro.... He asked me what I really want because the way providers work in Africa I think it's different but here is what I temporarily give

1. The global title you will use

2. The point code you will use (client PC)

3. The peer point code of the provider (Peer PC)

4. The IP address of the providers peer for SCTP associations and

5. the used port (Peer IP, Peer port)

[Adewale121]

Is that all I need sir??? Your response needed urgently

[SigPloiter]

Send me ur email

On Friday, 2 November 2018, Adewale121 notifications@github.com wrote:

Is that all I need sir??? Your response needed urgently

— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub https://github.com/SigPloiter/SigPloit/issues/117#issuecomment-435230793, or mute the thread https://github.com/notifications/unsubscribe-auth/AXXuv2Bdo6HPCRmy7q_L1c9O2uMX7O1Tks5uq5BlgaJpZM4RXwQN .

[Adewale121]

Here it is sir.... blcksoldier@gmail.com

[xiaoxie1979]

Hi bro I have been looking for a long time, still have not found the SS7 interconnection method, maybe I can not understand the English, I have asked some VOIP providers, but they do not directly provide SS7 interconnection, I am going to find sip trunk and SMS provider Maybe I can get some data by grabbing the package. I only need the STP address and port. I have opc and dpc and globaltitle. These are the data of others. I don't know if it works for me?

[vportal]

Hello,

I have also been asking to a lot of SMS and VOIP providers and they don't provide SS7 access to end users. Another concern i have is if these providers that give SS7 access apply filtering rules to block certain types of SS7 messages.

Best regards.

[SigPloiter]

Yes they can filter some messages of course

On Thursday, 2 May 2019, vportal notifications@github.com wrote:

Hello,

I have also been asking to a lot of SMS and VOIP providers and they don't provide SS7 access to end users. Another concern i have is if these providers that give SS7 access apply filtering rules to block certain types of SS7 messages.

Best regards.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/SigPloiter/SigPloit/issues/117#issuecomment-488718356, or mute the thread https://github.com/notifications/unsubscribe-auth/AF265PYT7IT2FDKDFPQIGL3PTMB6VANCNFSM4EK7AQGQ .