search

SignalK / n2k-signalk

NMEA 2000 to Signal K transformer
Apache License 2.0
23 stars 29 forks source link

Engine/Genset Instance Handling #143

Closed mghan closed 5 years ago

mghan commented 5 years ago

I recently added a Yacht Devices YDEG J1939 to N2K gateway for my generator. I configured it as instance 2 (instance 0 & 1 cover my mains) - that is confirmed by my Actisense NGT-1 reader (running on a Win PC) connected to the N2K network. The Actisense reader sees the instance (2), RPM, coolant temperature and runtime.

I have two issues: 1) The genset appears in Signal K as an additional propulsion.starboard engine, only differentiated by the source field, Being another instance, I would expect something like propulsion.2.xxx 2) Only coolant temp and runtime appear in Signal K (from PGN 127489). RPM (PGN 127488) do not appear unless I configure the genset gateway as another instance 0 (which greatly confuses the MFD displays). Attached is a NGT-1 log. skserver-raw_2019-02-27T22.log

sbender9 commented 5 years ago

I just published this release, if you run the command to update node server, you should get the update.

mghan commented 5 years ago

Works perfectly – thank you!

From: Scott Bender notifications@github.com Sent: Sunday, March 03, 2019 10:36 AM To: SignalK/n2k-signalk n2k-signalk@noreply.github.com Cc: Mike Ghan mikeghan@ourclan.us; Author author@noreply.github.com Subject: Re: [SignalK/n2k-signalk] Engine/Genset Instance Handling (#143)

I just published this release, if you run the command to update node server, you should get the update.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/SignalK/n2k-signalk/issues/143#issuecomment-469050487, or mute the threadhttps://github.com/notifications/unsubscribe-auth/ADPEnEhsVb13iIjqejsOrJDNLb8wEP7Iks5vTBXygaJpZM4bW-dl.