Open puihao1994 opened 8 years ago
same as me,please fix it :)
Same problem, solution please !!
I'm my experience this happens when I'm not close enough to the access point. Has nothing to do with this script.
On Thu, Apr 28, 2016, 10:58 AM puihao1994 notifications@github.com wrote:
[image: capture] https://cloud.githubusercontent.com/assets/18725112/14895924/d3998dda-0dad-11e6-9656-13422c45c3c9.JPG
The E-Hash 1 is stuck on waiting for packet. Any solution or suggestion for this problem ?
— You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub https://github.com/SilentGhostX/HT-WPS-Breaker/issues/12
signal is 99%
What is your wifi chipset? Device model ?
On Wed, May 11, 2016, 7:46 AM Tatuatu notifications@github.com wrote:
signal is 99%
— You are receiving this because you commented.
Reply to this email directly or view it on GitHub https://github.com/SilentGhostX/HT-WPS-Breaker/issues/12#issuecomment-218482041
It's necessary to have an external wifi monitor or it's okay with my computer internal wifi .. ??
You get much broader range . I recommend an atheros based chipset. The tp link tl-wn722n works well.
On Wed, May 11, 2016, 1:42 PM soufianelaassal notifications@github.com wrote:
It's necessary to have an external wifi monitor or it's okay with my computer internal wifi .. ??
— You are receiving this because you commented.
Reply to this email directly or view it on GitHub https://github.com/SilentGhostX/HT-WPS-Breaker/issues/12#issuecomment-218583785
well that happened to me like 3 times the network signal is good but its stuck on this message (E-hash : waiting for packet) !
AWUS052NH with chipset: Ralink RT3572
Your chipset is good. Sometimes I notice that the power level is not accurate. What happens to you also happens to me but this was during a wardriving experiment so I just thought it was distance. It's possible that it maybe the router. What is the router model you are auditing?
On Wed, May 11, 2016, 11:31 PM Tatuatu notifications@github.com wrote:
AWUS052NH with chipset: Ralink RT3572
— You are receiving this because you commented.
Reply to this email directly or view it on GitHub https://github.com/SilentGhostX/HT-WPS-Breaker/issues/12#issuecomment-218671563
I don't know, it's my neighbor :)) Atheros AR9271 is good?
I get this same The E-Hash 1 waiting for packet, except later it finishes the process and says: sorry, the wps was not found.. My wifi chipset is an Alfa AWUS036NH. Also, if I run reaver then it would just retry the same 12345670 wps pin over and over. Idk if it maybe doesn't associate with the wps or something..
The router is an ARRIS Group Inc.
same issue
same issue too...
any solution??
same issue too...
any solution??
Same thing. Trying to run it on VMWare OSX 8.5, latest Kali.
Réessayer ultérieurement Le data doit être activé si aucun trafic n'est sur le router victime le script ne peut rien faire
Avec la commande airodump-ng mon0 On peut voir le bssid et le ssid et aussi le trafic ainsi que la chaîne de diffusion. ..
any solution??
about what
2016-12-17 15:42 GMT+00:00 kakayama notifications@github.com:
any solution??
— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/SilentGhostX/HT-WPS-Breaker/issues/12#issuecomment-267769400, or mute the thread https://github.com/notifications/unsubscribe-auth/AMkqMc6j_cyoKcmqvWDN43FianPwxruiks5rJAL7gaJpZM4ISLIl .
Has there been a fix for the waiting on packet ehash 1 issue ?!
toujours le même problème avec le même router antenne Alfa chipset RTL8187 router ZTE F660
This happens when you have Mac locked on the network you are trying to attack.
Tiagoditiall...
Don't think that is the problem. I have a router I'm testing current and it does not use MAC filtering at all, I'm in the same room as router, and I'm still receiving the error.
happens in both automatic and airmon-ng automatic modes
I just waited about 15-20 minutes and it went through. I think it is a matter of capturing a packet as it is being transmitted between devices, so the program can crack the packet and get the 1st part of the code, then it will try a pin, then if it successfully goes through the multiple steps that are progressively longer and longer, then it will use the data it grabbed from cracking the pin, to run Bully, and then either give you the Password, or fail to crack with Bully. :D
As a side note, the data packet needs to be transmitted from a device that already has the network password, so if no one is home, you will be waiting until they are, or a device in the house connects to the network!!!!!
I get the same issue.
Ralink Technology, Corp. RT5370
I get the same issue. EDUP
The E-Hash 1 is stuck on waiting for packet. Any solution or suggestion for this problem ?