[EFR32MG24] Silabs Matter Sensor Example

[lboue]

Description of the issue

I build Silabs Matter Sensor Example build from SimplicityStudio v5.

• Pairing and running this example is OK
• but toggles the Occupancy Sensor to off when pressing Push Button 1 doesn't work. LED 1 remains enabled

I tried as described here: Running the Complete Example.

Steps to reproduce the issue

1. Build Silabs Matter Sensor Example build from SimplicityStudio v5
2. Flash the app to the EFR32MG24 board
3. Flash the bootloader to the EFR32MG24 board
4. Restart the board
5. Start JLinkRTTViewer
6. Start pairing the device
7. Press Button 1 to toggle on the Occupancy Sensor
8. Press Button 1 to toggle off the Occupancy Sensor. LED 1 remains enabled.

Device type(s) and network topology

• Thead BR
  • 2 * AppleTV 4K
  • 1 HomePod mini

Proposed solution(s)

No response

SMG version

release_2.2.0-1.2

Protocol(s)

Thread

Hardware platform(s)

EFR32xG24 Explorer Ki BRD2703A

Development platform(s)

SimplicityStudio v5

Captured data or logs

jtt-sensor-SL.log