search

SimShaker-for-Aviators / SimShaker-for-Aviators-Releases

Public Repository for SimShaker for Aviators (SSA) Releases
24 stars 1 forks source link

DCS F18C Right Engine Startup Motor Not Working #19

Open shaji-Dev opened 1 year ago

shaji-Dev commented 1 year ago

Hi,

When doing engine startup and then go to Idle, the right motor doesn't vibrate only the left one starts vibrating on startup and then Idle and so on.

I did used the "Test Vibe-Motors" function in the settings multiple times and all the motors are working fine.

This has happened before but it was fixed with an update, now it's broken again. Is there something I need to change in my config or wait for another update?

Using SimShaker for Aviators Beta Version 2.6.8.0

Thank you.

f4l0 commented 1 year ago

Hey, I'll take a look if I can reproduce this issue. Does this also happen if you start with a running engine?

shaji-Dev commented 1 year ago

When starting with the engine is running in park and or flying the motor does work the same way as in a cold start after startup procedure, but it does have a lower intensity vibration than the other motors, I did swap it for another and it was the same issue.

I did swap the cable of right and left to see if the issue is with the controller and drivers but it's not.

On startup, when crancking the right engine, the motor simply doesn't vibrate, when going into Idle, it starts to vibrate but barely noticeable, when crancking the left engine everything works normally and the vibration is fine on that.

It's the right lower back motor.

If you need more information please let me know. Great work on the software, thank you.